Transposição de galharia como técnica de restauração de áreas degradadas: uma avaliação da eficiência do método na atração de fauna

O estudo foi realizado numa área degradada pertencente ao campus da UNESP em Rio Claro, e teve como objetivo avaliar a eficiência do método de nucleação para recuperação de áreas degradadas do tipo “transposição de galharia” na atração de fauna. As pilhas de galhos podem funcionar como abrigos artificiais, atraindo potenciais dispersores de sementes secundários, o que potencialmente abreviaria o processo de regeneração de um ambiente degradado. O estudo foi feito através do levantamento de pequenos mamíferos por armadilhas de interceptação e queda em quatro parcelas de 2500 m², sendo duas delas com o tratamento (pilhas de galhos), e duas funcionando como controle, e o resultado esperado seria uma maior quantidade de indivíduos capturados e de gêneros taxonômicos nas parcelas com o tratamento. Entretanto, as quantidades totais de indivíduos capturados no bloco das parcelas com tratamento e no bloco das parcelas controle foram, segundo o teste de Mann-Whitman, estatisticamente idênticos. Também a quantidade de gêneros taxonômicos capturados foi igual nos dois blocos. Desta forma, concluímos que o método “transposição de galharia” foi ineficiente neste estudo, da forma como foi empregado, não contribuindo para um aumento na fauna de pequenos roedores e marsupiais. O método pode ter fracassado devido a pequena quantidade de pilhas de galhos utilizados para o tamanho da área, como também pelo recobrimento da área por uma grande quantidade de gramíneas, que podem ter funcionado por si só como abrigo para os animais capturados, além de poderinibir a entrada de outros gêneros de pequenos mamíferos não-voadores. Sugerimos portanto, para o método ser mais eficiente, a colocação de uma maior quantidade de pilhas de galhos do que a utilizada no presente estudo, e elas devem ser maiores. Para ecossistemas que apresentam gramíneas densas e altas... (Resumo completo, clicar acesso eletrônico abaixo)

Implementação da eficiência global de equipamento (OEE) no padrão de produção e análise de impactos

Nowadays, there is a need for improvements in production processes for companies to be competitive, as it is an obligation of businesses, it is necessary to know about the production processes accurately, to learn where improvements in work and thus have large impacts results. The calculation of efficiency of production lines is necessary to know as much about the progress of production and for product costing, when the measurement is not suitable, it generates negative impacts on the company. Due to the impact generated by this parameter, the graduation work carry out the study of change in a method that does not include all requirements necessary, by another method known as Overall Equipment Effectiveness, and according to studies, covering various parameters, showing become more consistent. These values are contained in the pattern production which is used to fund the product, thereby also occur financial impacts. Thus the work will study the change along with the analysis of impacts caused by the change

Estudo sobre eficiência energética em uma unidade industrial

This work contemplates an opportunities study of the rational use of energy in an industrial unity from the demand analysis and electrical energy consumption. Through a guide of energy analysis it was described how to find the main problems that create energy wastes in an industry, showing the ways so the production processes avoid such wastes and start to use energy in a more sensible e efficient way. It was also studied, the technical e economical viability of possible interventions to be implemented in terms of energy conservation and of possible demand supply alternatives

Análise do Mapa da Cadeia de Valor em um Hospital do Vale do Paraíba

The Lean Thinking is a method used by various industries in order to eliminate waste and ensure quality for the customer. In the current scenario, Lean has been used in other areas such as the hospital in which many tools are being adopted in order to improve its internal processes. One such tool is the Value Stream Mapping, which proved to be an effective tool in industrial environments, and is being adopted by several hospitals. Thus, this paper presents a case study on the use of this tool in a sector of a hospital in the Vale do Paraíba, evaluating its importance, its impacts, positive and negative points and future projections. This is in the context of Lean Healthcare, a new model based on the principles of Lean Thinking which has been adopted by several hospitals and clinics throughout Brazil successfully

Comparação da eficiência térmica de trocadores de calor no laboratório de sistemas térmicos da Faculdade de Engenharia

This work aims to verify and compare the efficiency of heat exchangers used in the thermal systems laboratory at Faculdade de Engenharia do Campus de Guaratinguetá - UNESP. Basically, it has been studied two types of heat exchangers: plate type, operating in parallel flow and counter-flow, shell and tube type and also operating in parallel flow and counter flow. Initially it has been presented the didactic equipment and procedures for use of these heat exchangers in the proposed experiments. With the results obtained from the experiments, comparisons were made in order to define the behavior of the heat exchangers regarding some variables. In the study, one comes to the conclusion that the results from shell and tube type of heat exchanger, used in the thermal systems lab, are superior in all conditions analyzed

Eficiência energética em ar condicionado e refrigeração através da aplicação da termoacumulação

The use of refrigeration and air conditioning systems is of fundamental importance when it comes to air-conditioning of environments. Also important is the use of electricity for equipments’ operation related to these systems. Due to high cost of charging for this type of energy, factors economy and efficiency occupy key roles among design parameters of a system. One of the ways to get this economy is the use of a technique called thermal storage, or cold storage, which intends to move the required loads during peak time and also their equalizing, so that the energy is transferred from the peak time to non-peak time, thereby reducing the cost of energy consumed. Cold can be stored in the form of ice or ice water. This work aims to perform a technical-economic analysis of a mall located in Vale do Paraíba checking the feasibility of deploying a thermal storage system to achieve an economy in the cost of the energy used by the establishment. Through the parameters measured by the concessionaire of energy we can get the values of energy demand and power consumed, which will serve as basis for calculation for the study. The results obtained allow the development of two alternative proposals to the current configuration, one chosen by the criteria and results presented by technical-economic and energy analysis

Estudo da eficiência de reforços estruturais em vigas de concreto armado com o uso de chapas de aço coladas com resina epóxi: uma análise qualitativa

In civil engineering, a structure is the whole sustainment of a construction and, thus, it is important that it remains intact throughout its lifetime. An engineering construction must last for decades without losing its functionality. However its purpose may be altered and several times the original structure does not meet the new needs of use. Still, in new buildings, the functionality is altered due to possible flaws in execution and the structure, invariably does not reach the desired solicitation needs. In cases like this, the commonly adopted solutions are, basically, the demolishment followed by the reconstruction of the desired mold or the structural reinforcement. This second option, for long years, has not been put to practice due to certain factors such as the high costs for its implantation, use of inadequate reinforcement execution techniques, and the culture of people involved in the area regarding its use and, in this case, the option would always be the reconstruction. Thoughtout the years, some techniques were developed to allow the execution of structural reinforcements with low costs and in efficient ways. An interesting, fast, efficient and economical technique is the structural reinforcement through metal sheets put together with epoxy resin that can be applied in beams, slabs and pillars. In the present work the different behavior of beams reinforced with this technique. Steel is a very recommended material for these reinforcements due to its characteristics related to traction, compression and the effectiveness of the technique related to its cost. For the attachment the epoxy resin is recommended, since it allows the joining of two materials, in this case, steel and concrete. The efficiency of this union is so considerably high that it rarely produces any flaws in adherence and, normally, when it happens it is due to problems in the execution process, not in the union of materials

Elaboração de mapa de susceptibilidade de corridas de massa/detritos e ondas de cheia, aplicado a empreendimentos dutoviários, na bacia hidrográfica do Ribeirão da Prata (SP)

Given the intense expansion of the industries in Brazil and the discovery of hydrocarbons in the pre-salt layer of the Santos and Campos Basin, there is a need to expand the distribution of oil and gas network in the country. The present work aims to present the development of susceptibility map by two distinct methods of two events (debris flows and full wave), applied to the establishment of pipelines on Ribeirão da Prata Basin. The research area covers two municipalities: São João da Boa Vista and Águas da Prata, in total 145 km2. In the paper was used the methodology proposed by Zaine (2011) for the physiographic subdivision method, which uses geological maps, geomorphological maps, digital terrain models and aerial photographs, used to extract the main elements of the physical environment, as rivers, lines, ridges, tops forms and valley forms and historical processes. Thus, the basin was divided into 11 physiographic zones, considering the following elements: thickness of soil, rock type, geomorphology, amplitude, ridges orientation, erosion occurences and mass movements. Were subsequently performed location maps of dams, that had as main purpose to localize major dams in the study area along with their area and perimeter of the reservoir, and land use map that subdivided the area in woody vegetation, permanent culture, temporary culture and urban area. Along with the preparation of the auxiliar maps was conducted a field campaign with three days and approximately 2 points per km2, which aimed to better understand the physical environment and check the main peculiarities of the study area. Criteria have been established for susceptibility maps physiographic subdivision and land use, and a survey of criteria weights used in each map for both processes under study. For the preparation of susceptibility maps were adopted two different methods, which treat the weighted average and the multiplicand. The weighted average method it is...

Verificação da eficiência da metodologia Seis Sigma na redução da divergência de estoque em uma indústria de condutores de fluídos

This work was developed in order to reduce the discrepancy found between the stock data of an item in the system and the amount found physically in stock in the company presented on this study case. Therefore, this paper makes a study on system of information that can assist in the collection, control and manipulation of data regarding the company's stock. It is very important to do the inventory management, so we can control the level of this sub-product to meet sales orders and production. In the study discussed below, we used the Six Sigma methodology to identify points that had flaws in the process and thus improve their work where the results show grater process control and provide a reliable database to the point where no further problems of lack of components in stock

Classificação de impressões digitais

The biometric characteristics have been used increasingly as a way to identify an individual, mainly for security reasons. Among them, the fingerprint is the most used biometric characteristic around the world, because it is relatively simple and very efficient. In this scene, there was a significant increase in the size of databases containing information on fingerprints, necessary to perform the recognition of a person. The task of classifying them beforehand has become extremely important as it reduces dramatically the size of the problem during a search, because it is not necessary to go through the whole database. Considering its importance, in the last thirty years, many techniques have been developed to try to increase the efficiency of the classification process. This project followed the rules-based approach and the Software Development Kit (SDK) VeriFinger 6.1 was used to assist in the detection of cores and deltas. Additionally, the classification was also implemented by means of directional map and the Poincar´e index. To make the experiments, the number four database from the National Institute of Standards and Technology (NIST) was used, which is a standard in this area

Análise preliminar da eficiência de sabonetes em barra frente a candida spp potencialmente patogênica ao organismo humano

O presente trabalho foi elaborado e realizado a fim de se demonstrar a importância da lavagem das mãos no cotidiano, uma vez que mãos humanas podem ser consideradas fonte de diversos agentes etiológicos de doenças que podem comprometer a saúde principalmente de pacientes debilitados. Para tanto, foram aplicados testes de sensibilidade a sabonetes utilizando-se métodos normatizados e validados pelo CLSI (Clinical and Laboratory Standartds Institute) e, por fim, foi verificado o efeito dos mesmos sobre biofilmes formados a partir de espécies e cepas fúngicas conseguidas por meio de lavagens das mãos de voluntários. As amostras utilizadas foram sabonetes em barra adquiridos do comércio, um de formulação bactericida (com adição de extrato de própolis) e outro de formulação comum. Foram realizadas lavagens com os sabonetes-amostra e água destilada, dentro de fluxo laminar, onde foi possível recolher a água usada no enxágüe. A partir do plaqueamento (em meio Sabouraud-dextrose com cloranfenicol 0,05%) das mãos voluntárias sem assepsia prévia, da água de lavagem e das mãos lavadas foram obtidas culturas fúngicas. Essas culturas foram selecionadas de acordo com a viabilidade de isolamento, e então foi feita a identificação das espécies. Através da triagem pelo método de identificação por ChromagarTM Candida, foi possível identificar que duas colônias obtidas das lavagens das mãos foram identificadas como C. krusei e C. albicans. C. albicans ainda pôde ser confirmada... (Resumo completo, clicar acesso eletrônico abaixo)

Distribuição e dispersão dos níveis radiométricos do setor técnico de medicina nuclear do hospital das clínicas da faculdade de medicina de botucatu

Nuclear medicine uses non-sealed sources for exams and treatments, because the movement of these sources, source of patients injected or not, involve a wide range of environmental radiometric levels. To better control of these levels this study was aimed at monitoring points strategically distributed in all environments Sector Technical Nuclear Medicine, Hospital of the Botucatu Medical School, performing two measurements at random times daily for a period of three months, sampling the normal routine of the sector. The detector Geiger-Muller was used for the acquisition of exposure rates of the points, efficiency and reprodutibility test have shown good performance of this equipment for this purpose. The results allowed to make a projection of annual dose for each environment indicating higher risks for Occupationally Exposed Individuals as well as Public Individuals compared with the limits established by the National Commission of Nuclear Energy. Was developed a spatial map of dose that can be used as a visual warning to the regions with the highest exposure to ionizing radiation, enabling reduced risk of a potential exposure

Análise da eficiência do cobre, alumínio e PVC como condutores hidráulicos em aquecedores solares

One of society concerns are preserving the environment and the growing energy demand. These two issues are in conflict since most of the energy used today in some way harms the environment. Then is essential to develop and implement ways to clean and renewable energy. In this way, solar energy stands out as a source of clean energy, renewable, abundant and acessible. Solar energy can be harnessed by photovoltaic cells or by solar collectors. The aim of this article is analysethe yield of the solar heather assembled with hydraulic conductive and plastic bottles using three different materials for hydraulic conductors, in order to compare these efficiences and analyze material which has the best cost-benefit in this type of application. The materials analyzed in this study were copper, aluminum and PVC. For this analysis were assembled three alike solar heaters using each one of these materials, and were done several series of measurements of the temperature water output to each heat with flow between 10 and 30 liters per hour. With these data we can analyze the yield and the performance of copper, aluminum and PVC in this application. So we can conclude that aluminum has a higher efficiency, followed by PVC, and the copper had the lowest efficiency. This behavior kept for all values of flow rates examined

Eficiência das resinas XAD4 e C18 na extração de compostos mutagênicos presentes em efluente de refinaria de petróleo para a realização do Teste de Ames

Não disponível

Uma análise da eficiência de uma transmissão CVT

This undergraduate thesis evaluates the effects of temperature variation of the air inside the CVT gearbox on the performance of a Continuously Variable Transmission (CVT). The CVT used in the tests was manufactured by Gaged Engineering (GX9 model) and is currently used in a Baja prototype. It’s a mechanically operated CVT, which the movement of the pulley plates varies according to the drive shaft rotation, shifting the belt along the diameter, and varying the transmission ratio. The purpose of this work is to analyze the change in the slip factor, coefficient that compares the variation between the actual transmission ratio and the ratio of geometric transmission, and its correlation with the power variation. A test bench was built and some tests were performed, indicating that was possible to achieve output power ratios of 1.75 [ℎ