Plant nutrients in a degraded soil treated with water treatment sludge and cultivated with grasses and leguminous plants

The objective of this work was to evaluate rates for applications of water treatment sludge (WTS) as a nutrient source for grasses and leguminous plants cropped in a soil degraded by tin mining in the Amazon Region (Natural Forest of Jamari, Rondonia State, Brazil). The treatments consisted of three rates of nitrogen supplied by WTS (100, 150 and 200 mg kg -1 soil), five combinations of plants, two controls (absolute control, without fertilization; and chemical control, soil+lime+chemical fertilizers). WTS modified the contents of macro and micronutrients in the degraded soil, but it was not, as used in the present study, sufficient for the rehabilitation of the degraded area. © 2006 Elsevier Ltd. All rights reserved.

Defect-induced photoluminescence of powdered silica glass

Visible photoluminescence was generated in standard soda-lime-silica glass powder, mechanically milled in a high-energy attrition mill. The broad emission band maximum shows a linear dependence on the exciting wavelength, suggesting the possibility to tune the PL emission. The photoluminescence was attributed to defect generation related to unsatisfied chemical bonds due to the high surface area. Raman scattering and ultraviolet-visible optical reflectance measurements corroborate this assertion. Transmission electron microscopy measurements indicate that the powder is composed by nanocrystallites with about 10-20 nanometers immersed in an amorphous media.

Efeito residual de calcário, nitrogênio e zinco na produção de matéria seca de Brachiaria decumbens em condições de campo

The balance of liming and fertilization practice with nitrogen and zinc could affect the production of the pasture. Thus, the present work has as objective to evaluate the residual effect of the application of calcareous rock, nitrogen, and zinc on the dry matter production of Brachiaria decumbens, during three cuts. For this, an experiment was installed in Selvíria, Brazil, on a distrofic red Latosol, from october 1997 to may 1998. The experimental design was randomized blocks, in a factorial project 3×3×2, with four repetitions. The treatments were three doses of nitrogen: 0, 50, and 100 kg/ha, three doses of lime: 0, 267, and 556 kg/ha, corresponding to 41, 50, and 60% of the levels of base saturation, respectively, and two doses of zinc 0 and 5 kg/ha, applied in the first year and reapplied in the second year, except for the limestone. Four cuts were done in the grass at 10 cm of height, with intervals of 49 days, to obtain the dry matter production. The limestone application in the first year did not provide to residual effect on the production of Brachiaria decumbens. However, the nitrogen fertilization increased the dry matter production of the grass. The application of zinc in the first year and the reapplication in the second year did not result in a productive response of B. decumbens. © 2009 Instituto Nacional de Investigaciones Agricolas INIA.

In vitro evaluation of the effect of natural orange juices on dentin morphology

The patient's diet has been considered an important etiological factor of dentin hypersensitivity. The frequent ingestion of acidic substances can promote the loss of dental structure or remove the smear layer. The purpose of this study was to evaluate the degree of smear layer removal and dentinal tubules exposure by different natural orange juices. Extracted human teeth were submitted to manual scaling in order to develop the smear layer. Seventy dentin samples were obtained and distributed into the following groups: Control, lime orange, lime, valência orange, navel orange, mandarin, and tangerine. Each group included 2 methods of application: Topical and topical + friction. After preparation for SEM analysis, photomicrographs were assessed by a blind calibrated examiner using an index system. The Kruskal-Wallis test indicated a significant influence of the orange juices on smear layer removal. Significant difference was observed between navel orange, valência orange, mandarin and the control group (p < 0.05). These orange juices resulted in greater removal of the smear layer and greater opening of dentinal tubules. The comparison between the application methods for each group using the Mann-Whitney test showed that friction increased smear layer removal significantly only for lime orange and lime. The data suggest that certain natural orange juices are more effective in terms of smear layer removal and dentinal tubules exposure than others.

Resposta do manjericão (Ocimum basilicum L.) cultivado em solos corrigidos com calcário e escória silicatada: Caracterí sticas agronômicas e produção de matéria seca

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Alternative to peat for Agaricus brasiliensis yield

Casing layer is one of the most important components of Agaricus spp. production and it directly affects mushroom productivity, size and mass. The aim of this study was to evaluate potential raw materials as a casing layer and their effect on Agaricus brasiliensis productivity. Raw materials from Brazil with potential use were selected and characterized, and the most promising ones were tested as casing layers for mushroom yield. Evaluated raw materials included lime schist, vermiculite, eucalyptus sawdust, sand, São Paulo peat, Santa Catarina peat, subsoil and charcoal. Particle size, porosity and water absorption in relation to mushroom yield for casing layers were determined. Lime schist, an alternate casing layer to peat, is presented and the effects of the casing layer on the mushroom yield are discussed. © 2009 Elsevier Ltd. All rights reserved.

Atributos químicos do solo e produtividade da cultura de soja em área de semeadura direta após calagem superficial

This study was carried out to evaluate the effects of surface application of lime rates on soil chemical attributes and soybean yield in a no-tillage system. It was installed a field experiment in a factorial 2×4, and the factors were: two types of lime (calcitic and dolomitic); four rates (0.0 - 0.5 - 1.0 and 1.5 t ha-1 of CaCO3), in a completely randomized blocks experimental design, with four replications. The experiment was located in Matupá, Mato Grosso State, Brazil, being the work developed between November 2006 and May 2007. The evaluations were chemical attributes in the soil layers (0,0-2,5 cm, 2,5-5,0 cm and 5,0-10,0 cm), and the productive characteristics of soybean. Application of lime increased the soil pH (CaCl 2), the exchangeable Ca and Mg, the effective CEC and the base saturation only in the soil surface layer. The two limes were different only for Ca and Mg values in the first layer of soil, and only for the Mg values in the layer of 2,5-5,0 cm. The surface liming in no-tillage system did not change soybean yield.

Esterco bovino para o desenvolvimento inicial de plantas provenientes de quatro matrizes de Corymbia citriodora

This work aimed to evaluate the effect of cattle manure levels in the phase of implementation Corymbia citriodora (Hook.) K. D. Hill & L. A. S. Johnson (Eucalyptus citriodora) seedlings in field, produced from seeds collected from four mother trees. The experiment was carried out in green house, in pots filled with 5 dm 3 of Oxisol. Five cattle manure levels were applied 0, 10, 20, 30, and 40 t ha -1 (0, 25, 50, 75, and 100 g pot -1). All treatments received lime levels which were calculated to increase the base saturation degree to 50%. The soil fertility was evaluated after 30 days of soil incubation with manure and lime. The seeds were collected from mother trees called 2, 8, 20 and 29. Sowing was performed directly in rigid plastic containers of 50 cm 3 and seedlings were transplanted when they were around 17 cm height. The experimental design was entirely randomized, in a factorial 5 × 4 (five doses of cattle manure and seeds of four mother trees) scheme and four repetitions. Each parcel was a pot with two plants. At 90 days the height, foliar area, stalk diameter, shoot and root dry matter. The plants responded positively to application of manure, but differently for each evaluated growth characteristic linearly or quadratically. The manure levels had linear effects on growth characteristics and dry matter production of the plants from mother trees 2 and 20 moreover these plants require more cattle manure levels than ones from mother trees 8 and 29. The cattle manure promoted the best development of plants from mother trees 8 and 29, in relationship with dry matter production of shoot components was approximately 27 t ha-1, equivalent to 67.5 g pot.

Nitrogênio, fósforo e potássio na produção de massa seca e no acúmulo de nutrientes em mudas de limeira ácida 'tahiti'

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desempenho de novilhas de corte alimentadas com cana hidrolisada

The objective of this study was to evaluate the performance, consumption and feed conversion of Angus x Nellore heifers fed hydrolyzed sugarcane. Twenty-four (1/2 Angus x Nellore crossbred) heifers were used with average body weight of 242 kg ± 23 kg, confined in individual pens with total area of 15 m2. The study consisted of six treatments distributed as follows: T1-in natura sugarcane: sugarcane was given to animals after being chopped; T2-hydrolyzed sugarcane with 0.5 % lime and 24 hours of air exposure; T3-hydrolyzed sugarcane with 0.5 % lime and 48 hours of air exposure; T4-hydrolyzed sugarcane with 1.0 % lime and 24 hours of air exposure; T5-hydrolyzed sugarcane with 1.0 % lime and 48 hours of air exposure; T6-hydrolyzed sugarcane with 1.0 % lime and 72 hours of air exposure. We used a completely randomized design with four replicates per treatment, and averages were compared by Tukey test at 5 % significant level of probability. No statistical difference was found for any of the treatments (P>0.05). The processing of sugarcane with lime did not increase the intake and performance of animals evaluated in this study.

Daños causados por cancro cítrico en la producción de naranja dulce 'Valencia'

The citrus canker, caused by Xanthomonas axonopodis pv. citri, is one of the main citrus diseases and has threatened the world's citriculture. In this study, the damage caused by citrus canker was quantified in a sweet orange culture, cv. Valencia [Citrus sinensis (L.) Osb.], grafted over 15 year-old Rangpur lime (C. limonia Osb.), in the municipality of Guatambu, SC, Brazil, in the crop of 2004/05. Evaluations of the number of fruits per plant (NF), fruit yield per plant (P), citrus canker incidence on the fruit (IFR), and incidence (IL) and severity (SV) of citrus canker on 80 leaves per orange tree were performed in the harvest period, applying diagrammatical scales. Plants had large variation in SV (0.16%-1.09%), IL (12.50%-56.25%) and IFR (12.30%-56.09%). Linear regressions were significant between IL x SV, NF x SV, P x IFR, and NF x IFR. There was no significant difference (p>0.05) between the mean estimated values of IL in different quadrants of the crowns of the orange trees (N, S, L and O). Each 1% increase in IFR reduced 2.16 kg and 21.3 fruits per tree.

Estimate of concrete block texture using image analysis

The texture of concrete blocks is very important and is often the decisive factor when choosing a product, particularly if the building specifications call for high-strength blocks allied to low-cost finish, in which case exposed blocks with a closer texture are often preferred. Furthermore, a closer texture, especially for exteriors, may be a vital factor in ensuring the building's durability. At present, however, there is no standard to quantify the texture of a structural block. Further, when studying masonry blocks compressive strength should never be overlooked. This article discusses a procedure to produce concrete block textures with and without the addition of lime, but still to achieve the required compressive strength. The method used in this study, to evaluate texture, proved to be simpler and cheaper than methods reported by other authors in the literature. The addition of small quantities of lime proved beneficial for both texture and compressive strength. Increasing the amount of lime further, however, only improved texture.

Application of UTHSCSA-Image ToolTM to estimate concrete texture

The texture of concrete blocks is very important and is often the decisive factor when choosing a product, particularly if the building specifications does not dispense with the high resistance of the blocks, but has the purpose of reducing costs with finishing, therefore preferring exposed blocks with a closer texture. Furthermore, a closer texture, especially for exteriors,may be the vital factor of the building's pathology.However, there is so far no standard to quantify the texture of a structural block. This article proposes to apply the freely available UTHSCSA-Image ToolTM program developed by the University of Texas Health Science Center at San Antonio to evaluate the texture of masonry blocks. One aspect that should never be overlooked when studying masonry blocks is compressive strength. Therefore, this work also gets the compressive strength of the blocks with and without the addition of lime. The addition of small quantities of lime proved beneficial for both texture and compressive strength. However, increasing the amount of lime proved to be feasible only to improve texture. © 2012 Taylor & Francis Group.

Influence of mineralizer agents on the growth of crystalline CeO 2 nanospheres by the microwave-hydrothermal method

Cystalline ceria (CeO2) nanoparticles have been synthesized by a simple and fast microwave-assisted hydrothermal (MAH) under NaOH, KOH, and NH4OH mineralizers added to a cerium ammonium nitrate aqueous solution. The products were characterized by X-ray powder diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Fourier transformed-IR and Raman spectroscopies. Rietveld refinement reveals a cubic structure with a space group Fm3m while infrared data showed few traces of nitrates. Field emission scanning microcopy (FEG-SEM) revealed a homogeneous size distribution of nanometric CeO2 nanoparticles. The MAH process in KOH and NaOH showed most effective to dehydrate the adsorbed water and decrease the hydrogen bonding effect leaving a weakly agglomerated powder of hydrated ceria. TEM micrographs of CeO2 synthesized under MAH conditions reveal particles well-dispersed and homogeneously distributed. The MAH enabled cerium oxide to be synthesized at 100 °C for 8 min. © 2012 Elsevier B.V. All rights reserved.

Effects of superficial liming and silicate application on soil fertility and crop yield under rotation

Soil acidity and low natural fertility are the main problems for grain production in Brazilian 'cerrado'. Although lime has been the most applied source for soil correction, silicate may be an alternative material due to its lower solubility and Si supply, which is beneficial to several crops. This work aimed to evaluate the efficiency of superficial liming and calcium/magnesium silicate application on soil chemical attributes, plant nutrition, yield components and final yield of a soybean/white oat/maize/bean rotation under no-tillage system in a dry-winter region. The experiment was conducted under no tillage system in a deep acid clayey Rhodic Hapludox, Botucatu-SP, Brazil. The design was the completely randomized block with sixteen replications. Treatments consisted of two sources for soil acidity correction (dolomitic lime: ECC=90%, CaO=36% and MgO=12%; calcium/magnesium silicate: ECC=80%, CaO=34%, MgO=10% and SiO2=22%) applied in October 2006 to raise base saturation up to 70% and a control, with no soil correction. Soybean and white oat were sown in 2006/2007 as the main crop and off-season, respectively. Maize and bean were cropped in the next year (2007/2008). Products from silicate dissociation reach deeper soil layers after 18months from the application, compared to liming. Additionally, silicate is more efficient than lime to increasing phosphorus availability and reducing toxic aluminum. Such benefits in soil chemical attributes were only evidenced during bean cropping, when grain yield was higher after silicate application comparatively to liming. Both correction sources were improved mineral nutrition of all the other crops, mainly Ca and Mg levels and agronomical characteristics, reflecting in higher yield. © 2012 Elsevier B.V.