Armazenamento, tolerância à dessecação e o potencial fisiológico de sementes de híbridos de milho e seus recíprocos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Temperatura, luz e tolerância à dessecção na germinação de sementes de açaí-do-Amazonas

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Umidade na folha de amoreira (Morus sp.) em ambientes de armazenamento

Mulberry leaves (IZ 56/4 cultivar) in the pos-harvest, had been taken to the laboratory and submitted to six storage environments (8 hours in open ambient-O, 8 hours in cover ambientC, 1hO/7hC, 2hO/6hC, 3hO/5hC and 4hO/4hC), aiming to evaluate moisture exchange capacity . It was utilized the experimental design split plot with five replications (blocks), six principal treatments (parcels) and nine secondary treatments (sub parcels, weighing of hour in hour, of 08h00min. until 16h00min.). In the period of eight hours of experimentation mulberry leaves moisturedevreased in all the ambients evaluated. However, for cover leaves with wet cloth, for all periods, the water purport (74,63%) was maintained close to the original value (08h00min.- 76,07%), demonstrating the efficiency technique in the conservation of the humidity of leaves for feeding silkworm.

Influência dos espaçamentos de plantio da cultura de cana-de-açúcar (Saccharum spp) nos atributos físico-hídricos do solo

The evolution of sugar cane mechanized harvesting made the sector to question the current row spacing used due to its influence on soil compaction. The aim of this study was to evaluate the soil hydro-physical attributes in two row spacings after the farm machinery traffic. The treatments were conducted in a randomized block design with twelve repetitions, being subjected to the variance analyze in double factorial arrangement. The bulk density, the gravimetric water content, and the soil cone index along the position of crop lines (LC) and 0,1m from the row (LP) at the range of depth of 0 to 0.2m and 0.2 to 0.4m were assessed in both row spacings after the fourth harvest season. The results showed that the row spacings of 1.4 and 1.5m did not affect the values of bulk density and gravimetric water content of the soil in all ranges of depth and sample positions studied. However, in the depth range of 0.2 to 0.4 m, the values of soil cone index (IC) in the row spacing of 1.5 m were higher than the values in row spacing of 1.4 m, at both sampling positions. Regardless of row spacing and sample position, the values of soil cone index in the depth range of 0.2 to 0.4m were higher than the depth range of 0 to 0.2m.

Qualidade do óleo bruto de grãos de crambe (Crambe abyssinica Hochst) sob diferentes métodos de secagem

The Culture of crambe became promising since its grains presents high oil content. The methods of drying may influence the quality of crude oil extracted from the beans, depending on the way it is managed. This study goal was to evaluate the influence of different drying methods on the quality of the crude oil extracted from crambe grain. The experimental design was completely randomized with five treatments (drying with heated air, natural air, yard, shade, and at the field), and with four tests for each. In order to check the quality of the grains, we performed an analysis of fat acidity, and to evaluate the crude oil quality, we conducted analysis of iodine value, acid value, water content, density at 20ºC, and a kinematic viscosity at 40°. After obtaining the data, the results were submitted to analysis of variance. When significant means were detected, they were compared by t-test (p ≤ 0.05). The method of drying with heated air provided a lower rate of fatty acid in grains. The drying methods evaluated did not compromise the quality of the oil extracted from the crambe grain.

Efeito imediato do método de secagem na qualidade de sementes de crambe

Crambe (Crambe abyssinica Hochst) seeds have high oil contents and its growth in Brazil aims to produce bio diesel. The crambe seeds production and commercialization began a few years ago. Research in technology production is essential and it is also important to use high quality seeds regardless of the technological level employed in the crop production. One of the factors that affect seed quality there is the drying process. Seed drying performed properly can reduce seed moisture content for storage without decrease in its qualitative characteristics. The aim of this study was to evaluate the immediate effect of natural and artificial drying methods (using heated and unheated air) on crambe seeds quality. The seeds were produced at Fazenda Lageado, Faculdade de Ciências Agronômicas, UNESP, Botucatu/SP, on April 2009. Seeds were submitted to the following drying methods: a) seed drying in the shade with natural ventilation; b) artificial drying method using heated air; c) artificial drying method using unheated air; d) drying on ceramic patio; e) drying on the mother plant. The seeds were evaluated immediately after drying. The following tests were performed: seed moisture content; standard germination; first count of germination; seedling emergence; emergence speed index and electrical conductivity. The experimental design was randomized blocks and the data obtained was subjected to analysis of variance, worth means being compared by Tukey test at 5% probability. There was no significant difference among drying treatments in relation to: germination rate, first count of germination, electrical conductivity, seedling emergence and emergence speed index. The highest percentage of abnormal seedlings was obtained on treatment with heated air drying. The drying on the mother plant method showed the lower percentage of dead seeds. The drying methods studied did not cause an immediate effect on crambe seeds quality, which showed high percentage of dormant seeds post-harvest.

Alterações na composição química e sensorial de café (Coffea arabica L.) nos processos pós-colheita

An interdisciplinary study was conducted to evaluate the effects of drying and storage time on changes in the quality of natural and fully washed coffees beans dried out in the yard and mechanically dried at a temperature of 60/40°C in air dryer machine. The coffee beans (Coffea arabica L.) harvested in cherries were processed by dry and wet methods, being subjected to pre-drying yard, followed by drying yard in the sun with air heated of 60/40°C until it reached the water content of 11% (wb). After reached the thermal equilibrium with the environment, the beans were packed in jute bag with a capacity of five kilograms and stored in uncontrolled environment during the period of one year, and removing material from each treatment every three months. To characterize the effect of drying and storage time on the coffee quality different methodologies was evaluated. It was observed less drying time for the fully washed coffee 60/40°C, and thus less energy consumed in the drying process until the point of storage, for the natural coffee there was significant effect of time on the chemical quality, biochemical and sensory; fully washed coffee proved to be more tolerant to drying than natural coffee, regardless of drying method, showing a better drink quality and less variation in chemical composition and biochemistry.

Capacidade de suporte de carga e densidade do solo em áreas de plantio direto com e sem escarificação

No-till has been used in many different regions of Brazil. However, depending on the location and intensity of machinery traffic, this has caused the problem of soil compaction and many producers are scarification the land as a solution to break through the layer that is restricting plant growth. The objective of this study was to evaluate the influence of scarification (0.30 m) in the physical properties of a dystrophic Alfisol comparing the results with a non-scarified contiguous area; both were previously conducted using no-till. The density and pressure of pre-consolidation were sampled in two areas of non-tillage, one with chiseling (PDCE) and one without (PDSE) by using the UMAS -Mobile Soil Sampling Unit built by NEMPA – Agroforestry Machinery and Tire Testing Center/FCA / UNESP, Botucatu ,SP. The UMAS is equipped with GPS which allows the samples to be georeferenced. The samples were evaluated in the laboratory through the collection of standardized rings. Sampling was performed at a dimension of 15 x 50 m, with 160 rings being collected. The samples containing rings which were used in determining the density and also for testing the consolidometer, were collected from the layers of 0 to 0.10 m, 0.10 to 0.20 m, 0.20 to 0.30 0.30 to I 0.40 m. For the odometer test the undisturbed sample rings were used in obtaining the load bearing capacity of the soil. The soil management adopted provided a decrease in soil density using no-tillage with scarification depths from 0.0 to 0.10 0.10 to 0.20 m while the other depths did not show any decrease. The pre-consolidation pressure in combination with soil aggregate resistance identified that the management process PDCE within all layers was subjected to water content reliability regarding a greater load bearing capacity of the soil. For the PDSE that only was possible in the 0 to 0.10 m, showing greater consolidation of this layer.

Caracterização biométrica e superação de dormência em sementes de Chloroleucon foliolosum (Benth.) G. P. Lewis

The objectives of this work were performing the biometric characterization of seed Chloroleucon foliosolum (Benth) G. P. (Lewis) from the municipality Ituaçu - BA, and analyze methods of scarification and temperature on germination. The seeds were characterized according to measurements of length, width and thickness, weight of thousand seeds, and water content. Were employed methods of scarification with sandpaper and sulfuric acid for 15 and 30 minutes, and not scarified seeds, combined with germination temperatures of 20, 25, 30 and 35 °C. Percentage and germination speed index, and percentage of primary root protrusion, abnormal seedlings, hard seeds and dead seeds were evaluated. The means of length, width and thickness was 6.03, 4.30 and 3.47 mm, respectively. The weight of a thousand seeds was 67.3 g with water content of 6.1%. Whereas the percentage germination with normal seedling, the method of scarification with sulfuric acid for 15 or 30 minutes combined to germination temperatures of 25 or 30 °C were effective in overcoming dormancy of Chloroleucon foliolosum.

Condutividade elétrica de sementes de camomila em resposta ao tempo de embebição e tamanho da amostra

Electrical conductivity has been proposed as a rapid test to evaluate seed vigor; however, few researches have emphasized methodologies to its use in seeds of medicinal plants, such as chamomile. The objective of the research was to evaluate the electrical conductivity of chamomile seeds affected by different imbibition times and sample size. The evaluations consisted of moisture content, germination and vigor (first count of germination) to seed initial characterization. Then, it was evaluated the electrical conductivity, affected by imbibition time (6, 12, 24 e 48 hours) and seed amount per sample (25, 50, 75, 100). The completely randomized design was used with four replications, arranged as a 4 x 4 factorial. Means were compared by the Tukey test at 5% of probability. It was concluded that the electrical conductivity of chamomile seeds is affected by the number of seeds per sample and imbibition time isolately.

Avaliação de um sensor de resistencia eletrica e sua correlação com atributos do solo

The electrical measures of the soil have been used as variables that correlate with its characteristics. This study aimed at developing an electrical capacitance sensor of low cost, to evaluate its performance on the field and verify the correlation between the measurements of electrical capacitance with physical properties (sand, silt and clay) and chemical properties of soil (pH, MO, P resin, H + Al, K, Ca, Mg, SB, CTC and V%) and the moisture content. The data sampling was performed at the farm named "Capão da Onça" which belongs to the State University of Ponta Grossa. The samples collection was conducted in an area of approximately 13 hectares, totalizing 81 samples. In each sampling the electrical capacitance of the soil was measured. After the sensor withdrawal, soil samples were collected and sent to be analysed in the laboratory of the College of Agronomics Science of the Paulista State University. The measuring instrument used to collect data on electric capacitance of the soil a digital multimeter was used. The data were submitted to the analysis of correlation and regression. The developed system presented a low cost and it was capable to measuring variation of the electrical capacitance of the soil. The obtained measures satisfactorily correlated with the levels of clay and sand, and weakly with the moisture content. This had demonstrated the possibility to use a sensor to verify the soil texture in not homogeneous areas. The measures of the electrical capacitance of the soil obtained by the sensor had significantly correlated with the soil attributes: calcium, magnesium, pH, SB and CTC. These results had demonstrated the possibility to use a sensor for soil fertility control.

Emissão de gases do efeito estufa e estoque de carbono no sistema solo-planta em área com aplicação superficial de calcário e gesso em experimento de longa duração

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Rotação e técnicas de manejo de biomassa em sistema plantio direto no cultivo de soja e milho

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Teor de flúor na água de poços superficiais

Most of the water supplies in Brasil have a low Fluoride concentration, however there are some places where these concentrations are above the recommended as suitable for human consumption, causing chronicle intoxication, more specifically, dental Fluorosis. This study aimed to know the Fluoride content naturally present in water from 175 shallow wells located in the rural zone of Gabriel Monteiro city, in São Paulo state, in 2004, and to verify if these contents could prevent dental decay. Armed with a map of the city were located and visited all households in which a sample of water used was collected in a polyethylene bottle, then sent to NEPESCO (Collective Health Research Nucleus) laboratory of the Post-Graduation Program of Preventive and Social Dentistry of the Ara atuba Dental School-UNESP, The method used was the Fluoride ion-specific electrode (Orion 9609 BN), coupled to an ion-analyzer (Orion 710 A). The results showed that in 73.36% of the samples in the Fluoride concentrations was considered despicable (<0.10 ppm F). The Fluoride concentration in water sources do not exceed the values recommended by Brazilian legislation, however, considering the low concentrations of Fluoride found in the sources analyzed, it is important to recommend the use of Fluoride products, if used with proper care, aiming to promote oral health in this population.

Efeitos da irrigação na sobrevivência, transpiração e no teor relative de água na folha em mudas de Eucalyptus grandis em diferentes substratos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)