Revolucionarios y bandidos: La trayectoria villista en la Revolución Mexicana

In the last decades of the 19 th century the Mexican society went through a period of political and economical stability, and relative social tranquility. On contrast, during the revolutionary context various armed movements promoted the disruption of this status quo. In this article, by the analysis of several testimonies, I intend to show some aspects regarding criminality and violence phenomena, during the 1910 and 1920 years on the Northern Mexico.

Path analysis and expected response in indirect selection for grain yield in soybean

This study aimed to determine the best auxiliary trait for indirect selection of soybean grain yield, through path analysis and in avoidance of the adverse effects of multicollinearity and expected response. Seventy-nine F5 soybean genotypes from the cross FT-Cometa x Bossier were used. The populations were distributed on the field was the families inserted with replicated controls. Primary and secondary traits of grain yield were evaluated in four phenotypically superior plants per family. The traits number of pods, height and number of nodes were considered as the most important, showing the best combination of direct effect and genotypic correlation. The number of pods achieved the highest expected gain through the estimation method based on the selection differential. On the other hand, plant height, by the method based on selection intensity, was not a good indicator of the most productive plants.

Does troncular vagotomy modify the proliferative gastric lesions induced in rats by duodenogastric reflux?

Purpose: to investigate if combining VT to DGR through the pylorus can modulate the biological behavior of PL induced by DGR and to verify if TV alone can induce morphologic lesions in the gastric mucosa. Methods: 62 male Wistar rats were assigned to four groups: 1 - Control (CT) gastrotomy; 2 - Troncular Vagotomy (TV) plus gastrotomy; 3 - Duodenogastric reflux through the pylorus (R) and 4 - Troncular vagotomy plus DGR (RTV). The animals were killed at the 54 week of the experiment. DGR was obtained by anastomosing a proximal jejunal loop to the anterior gastric wall. TV was performed through isolation and division of the vagal trunks. Gastrotomy consisted of 1 cm incision at the anterior gastric wall. PL were analyzed gross and histologically in the antral mucosa, at the gastrojejunal stoma and at the squamous portion of the gastric mucosa. Results: Groups R and RTV developed exophytic lesions in the antral mucosa (R=90.9%; RTV=100%) and at the gastrojejunal stoma (R=54.54%; RTV=63.63%). Histologically they consisted of proliferative benign lesions, without cellular atypias, diagnosed as adenomatous hyperplasia. Both groups exposed to DGR presented squamous hyperplasia at the squamous portion of the gastric mucosa (R= 54.5%; RTV= 45.4%). TV, alone, did not induce gross or histological alterations in the gastric mucosa. TV did note change the morphologic pattern of the proliferative lesions induced by DGR. Conclusions: DGR induces the development of PL in the pyloric mucosa and at the gastrojejunal stoma. TV does not change the morphologic pattern of the proliferative lesions induced by DGR. TV alone is not able to induce morphologic lesions in the gastric mucosa.

Development of SCAR marker linked to stem canker resistance gene in soybean

Stem canker caused by the fungus Diaporthe phaseolorum f. sp. meridionalis is a disease that limits soybean cultivation. Phenotypic evaluations aiming at disease resistance require labor-intensive processes, as for instance handling and transport of phytopathogens. The use of DNA markers in the selective procedures eases certain phases, besides being practical, safe and reliable. A RAPD fragment of 588pb was identified among bulks of resistant and susceptible plants in the cross BR92-15454 (R) x IAC-11 (S). Through co-segregation, the distance between the resistance locus and the fragment was estimated at 7.4 ± 2.1 cM, with a Lodmax. of 23.072 (first year) and at 6.0 ± 3.4 cM with a Lodmax. of 7.806 (second year). The fragment was converted into a SCAR marker and digested with enzyme Hinc II, which made the classification in homozygous resistant, heterozygous resistant and susceptible plants possible. This SCAR marker is suitable for use in the improvement program conducted in Jaboticabal.

The influence of residual salivary fluoride from dentifrice on enamel erosion: An in situ study

The objective of this study was to assess the salivary residual effect of fluoride dentifrice on human enamel subjected to an erosive challenge. This crossover in situ study was performed in two phases (A and B), involving ten volunteers. In each phase, they wore acrylic palatal appliances, each containing 3 human enamel blocks, during 7 days. The blocks were subjected to erosion by immersion of the appliances in a cola drink for 5 minutes, 4 times a day. Dentifrice was used to brush the volunteers' teeth, 4 times a day, during 1 minute, before the appliance was replaced into the mouth. In phases A and B the dentifrices used had the same formulation, except for the absence (PD) or presence (FD) of fluoride, respectively. Enamel alterations were determined using profilometry, microhardness (%SMHC), acid- and alkali-soluble F analysis. The data were tested using ANOVA (p < 0.05). The concentrations (mean ± SD) of alkali- and acid-soluble F (μgF/cm 2) were, respectively, PD: 1.27 a ± 0.70/2.24∧ A ± 0.36 and FD: 1.49 a ± 0.44/2.24∧ ± 0.67 (p > 0.05). The mean wear values (± SD, μm) were PD: 3.63 a ± 1.54 and FD: 3.54 a ± 0.90 (p > 0.05). The mean %SMHC values (± SD) were PD: 89.63 a ± 4.73 and FD: 87.28 a ± 4.01 (p > 0.05). Thus, we concluded that the residual fluoride from the fluoride-containing dentifrice did not protect enamel against erosion.

Scanning electron microscopic study of the in situ effect of salivary stimulation on erosion and abrasion in human and bovine enamel

This in situ study investigated, using scanning electron microscopy, the effect of stimulated saliva on the enamel surface of bovine and human substrates submitted to erosion followed by brushing abrasion immediately or after one hour. During 2 experimental 7-day crossover phases, 9 previously selected volunteers wore intraoral palatal devices, with 12 enamel specimens (6 human and 6 bovine). In the first phase, the volunteers immersed the device for 5 minutes in 150 ml of a cola drink, 4 times a day (8h00, 12h00, 16h00 and 20h00). Immediately after the immersions, no treatment was performed in 4 specimens (ERO), 4 other specimens were immediately brushed (0 min) using a fluoride dentifrice and the device was replaced into the mouth. After 60 min, the other 4 specimens were brushed. In the second phase, the procedures were repeated but, after the immersions, the volunteers stimulated the salivary flow rate by chewing a sugar-free gum for 30 min. Enamel superficial alterations of all specimens were then evaluated using a scanning electron microscope. Enamel prism core dissolution was seen on the surfaces submitted to erosion, while on those submitted to erosion and to abrasion (both at 0 and 60 min) a more homogeneous enamel surface was observed, probably due to the removal of the altered superficial prism layer. For all the other variables - enamel substrate and salivary stimulation the microscopic pattern of the enamel specimens was similar.

Effect of ultrasonic instrumentation on the bond strength of crowns cemented with zinc phosphate cement to natural teeth. An in vitro study

Several studies have reported the benefits of sonic and/or ultrasonic instrumentation for root debridement, with most of them focusing on changes in periodontal clinical parameters. The present study investigated possible alterations in the tensile bond strength of crowns cemented with zinc phosphate cement to natural teeth after ultrasonic instrumentation. Forty recently extracted intact human third molars were selected, cleaned and stored in physiologic serum at 4°C. They received standard preparations, at a 16° convergence angle, and AgPd alloy crowns. The crowns were cemented with zinc phosphate cement and then divided into four groups of 10 teeth each. Each group was then subdivided into two subgroups, with one of the subgroups being submitted to 5,000 thermal cycles ranging from 55 ± 2 to 5 ± 2°C, while the other was not. Each group was submitted to ultrasonic instrumentation for different periods of time: group 1 - 0 min (control), group 2 - 5 min, group 3 - 10 min, and group 4 - 15 min. Tensile bond strength tests were performed with an Instron testing machine (model 4310). Statistical analysis was performed using ANOVA and Tukey's test at the 5% level of significance. A significant reduction in the tensile bond strength of crowns cemented with zinc phosphate and submitted to thermal cycles was observed at 15 min (196.75 N versus 0 min = 452.01 N, 5 min = 444.23 N and 10 min = 470.85 N). Thermal cycling and ultrasonic instrumentation for 15 min caused a significant reduction in tensile bond strength (p < .05).

Characterization of Zn0. 95Mn0.05O synthesized by polymeric precursors

This paper discusses the preparation and characterization of Zn 0.95Mn0.05O phase obtained by the polymeric precursor method for DMS applications. The as-obtained powders were calcined between 500 to 800°C and characterized by XRD, SEM and BET. The XRD analysis of the powder showed a crystalline material containing second phase. The crystallite sizes ranged from 20 to 51 nm. The micrographs showed that the powders consisted of soft and homogeneous agglomerations. The nitrogen adsorption/desorption curves of the Zn0.95Mn0.05O phases were type II curves, which is characteristic of mesoporous materials.

Tipificação das famílias de oito assentamentos rurais da região de Andradina (SP), com base em diferentes estratégias de produção e comercialização

This article intends to provide a typology of the families that are settled in the region of Andradina (Sao Paulo state), according to the main production and commercialization systems and to the presence (or not) of agricultural income diversification. The empiric data used to form the groups originate from socioeconomic questionnaires that had been applied to 169 families of eight rural settlements and also from 80 interviews. The groups were compared with each other, starting from the family's profile; patrimony; credit and technical support; self-consumption production; and the lot's external income. The strategy to increase the production and the productivity (dairy cattle) is limited to less than a quarter of the producers, however different strategies had been used by families, such as the diversification of the agricultural income and the direct sale to the consumer or to the retail trade. The association of the production diversification with the use, in a regular way, of differentiated channels of commercialization demonstrated a strategy capable to approximate the indicators of this type of producer comparing with those that focused on increasing the production and the productivity. This verification is important because, even though there is no necessary contradiction among both strategies, a part of the families does not have resources, infrastructure and/or technical qualification to follow the way of the productive intensification and others do not have this project as a priority.

DMFT index assessment and microbiological analysis of Streptococcus mutans in institutionalized patients with special needs

Aim: To assess the DMFT (D = decayed; M = missing; F = filled) index of institutionalized patients with mild and moderate physical and mental disabilities and to correlate it with the Streptococcus mutans (S. mutans) counts in the supragingival bacterial biofilm. Methods: Dental examination of 28 patients aged 15 to 25 years was conducted to determine the DMFT index (number of decayed, missing and filled teeth). Supragingival plaque samples were collected from the buccal surfaces of all teeth. The samples were inoculated in SB20 medium and incubated at 37 °C for 48 hours. Spearman's correlation test was applied (p = 0.05) to evaluate the correlation between the DMFT index and the amount of S. mutans. Results: The mean DMFT recorded was 7.68 and a large mean number of S. mutans colony-forming units (cfu > 10 6) was found. No statistically significant correlation was found between the DMFT index and the number of S. mutans. Conclusions: Under the conditions of this study, no correlation was found between the DMFT index and the number of S. mutans cfu in institutionalized patients with mental retardation and physical disabilities.

Índice de infestação e fatores de mortalidade do bicudo-do-algodoeiro (Coleoptera: Curculionidae) no semi-árido do sudoeste da Bahia, Brasil

The boll weevil (Anthonomus grandis Boheman, 1843) (Coleoptera: Curculionidae) is a pest that limits the production of cotton, especially in the North East of Brazil. The present study aimed to estimate the infestation index and natural mortality of boll weevil at Caraibas County, located in the semi-arid of the Southwest ofBahia. The experiment was performed using the cultivar BSR Aroeira, at Fazenda Lagoa Seca, in 2006. Weekly evaluations were performed, in five sampling areas 25m2, collecting blossoms fallen on the ground. The infestation was estimated by counting the oviposition punctures and /or the feeding on blossoms, and also by the presence of one of the phases of the boll weevil in the inside. Mortality factors were studied through the dissection of blossoms, estimating predation, parasitism, dissection and disease. The results obtained allowed to conclude that the boll weevil determines high infestation levels in the region. Parasitism, dissection and predation, following this order, determine high rates of real mortality of the pest. Catolaccus grandis Burks, 1954 (Hymenoptera: Pteromalidae) and Bracon sp.(Hymenoptera: Braconidae) are parasitoids of boll weevil reported in sothwestern Bahia, being the first one the predominant species. © 2009, Sociedad Venezolana de Entomología.

Diffuse Effect of the Tungsten Doped Ba(Zr0.10Ti0.90)O3 Ferroelectric Ceramics

Barium zirconate titanate Ba(Ti0.90Zr0.10)O3 ceramics doped with WO3 (BZT:2W) have been prepared by a traditional solid phase reaction. The effect of temperature on the structural and electrical properties was investigated. X ray diffraction data evidenced formation of secondary phases for the samples sintered at 1300oC end 1350oC while the pure phase was attained at 1200oC. A modified Curie-Weiss law was used to describe the diffuseness of a phase transition. As temperature increases, the maximum dielectric permittivity decreased. The fine-grained sample showed a 'diffuse-like' ferroelectric behavior. The dielectric permittivity reaches a maximum value (εm ~6420 at 10 kHz) for the ceramics sintered at 1200oC for 4 hours.

Custos e rentabilidade do milho em função do manejo do solo e da adubação nitrogenada

Agronomic practices that help farmers to raise yield and reduce costs must be studied to ensure agricultural sustainability. Thus, the objective of this study was to analyze economically the effect of soil management and nitrogen fertilization in maize crops. Treatments consisted of a combination of 3 soil management techniques (plow harrows + floating harrows, chisel + floating harrows, and no-tillage), 5 periods of nitrogen fertilization (control - 0 kg ha -1 N; 120 kg ha -1 after sowing (S); 120 kg ha -1 in the V 6 stage; 30 kg ha -1 (S) + 90 kg ha -1 in V 6; 30 kg ha -1 (S) + 45 kg ha -1 in V 4 + 45 kg ha -1 in V 8 The total operating cost (TOC), gross revenue (GR), operating profit (OP), profitability index (PI), break-even yield, and break-even price were estimated. It was concluded that the no-tillage system, after 11 years of management, associated with nitrogen fertilization promotes positive PI and OP, being useful to farmers.

Observation of piezoelectric response on tungsten doped barium zirconium titanate ceramics

This study describes observation of piezoelectric response of Ba(Zr 0.10Ti 0.90.O3 ceramics modified with tungsten (BZT:2W) by the mixed oxide method. According to X ray diffraction analysis, the ceramics are free of secondary phases. Transmission electron microscopy (TEM) analyses reveals the absence of segregates in the grain boundaries indicates the high solubility of WO3 in the BZT matrix. The dielectric permittivity measured at a frequency of 10 KHz was equal to 6500 with dieletric loss of 0.15. A typical hysteresis loop was observed at room temperature. Electron Paramagnetic Resonance (EPR) analyses reveals that substitution of W6+ by Ti4+ causes distortion in the crystal structure changing lattice parameter. Polarization reversal was investigated by applying dc voltage through a conductive tip during the area scanning. Piezoelectric force microscopy images reveals that in-plane response may not change its sign upon polarization switching, while the out-of-plane response does. Copyright © 2010 American Scientific Publishers.