Recobrimento de múltiplas recessões com enxerto subepitelial: tratamento de descontaminação da superfície radicular com laser de Erbium YAG

Multiple gingival recessions may cause mainly dentinary sensibility and aesthetic alterations. The subepithelial graft is a mucogingival technique which can be used to treat multiple gingival recessions. In this case report the Erbium YAG laser was applied to promote radicular surface decontamination, an important step to reach reinsertion of the gingival tissues on exposed radicular surface.

Molhabilidade de material reembasador: efeito dos agentes químicos de limpeza

Risk of mechanical injuries contraindicate brushing and elect chemical agents as appropriate for daily cleaning of dentures relined with resilient materials. It was evaluated the effect of denture cleansers on the wettability of denture relining material (Dentusoft, Dental Medrano). We used 20 discs of acrylic resin thermoactivated VipiCril ® with 30mm diameter and 4mm thick, covered by 2mm Dentusoft ®. Divided into 4grupos were stored in artificial saliva at 37 +1 º C for 30 days, immersed daily for 15minutes in distilled water (GI), Corega ® Tabs (GII), a solution of sodium bicarbonate (GIII) or solution of sodium hypochlorite (GIV) after which, on the soft liner were poured 2 ml of type IV gypsum (Durone IV, Dentsply). Reached the final setting of the gypsum specimens were sectioned vertically and medially, settled water with sandpaper No. 400 and mounted on suitable device for reading (in the right and left) of the contact angle Carl Zeiss microscope (precision, 001). The results were submitted to analysis, showed non-normal distribution, opting for non-parametric test. Kruskal Wallis test performed at 5% significance, there was statistical difference between the groups with lower average contact angle for GII. It was concluded that the chemical cleaning Corega Tabs ® allowed a better adaptation of relining the gypsum studied.

Tratamento de superfície de implantes dentários: SBF

Various surface treatments of dental implants have been developed in order to ensure anchorage to bone tissue, optimization of the determinants of electronic structure, crystallinity, composition and properties. Coating techniques have been proposed in order tocreate unionbiochemicalable to accelerate the early stages ofbone tissue, combining the positive properties of titanium and its alloys bioactivity of ceramic materials. This paper discusses protocol for handling the SBF coating of titanium alloys. The apatite phase nucleation occurs by immersing the substrate in synthetic solution simulating blood plasma (Simulated Body Fluid). The protocol allows manipulation of the SBF solution to establish guidelines regarding the usestreamlinedand organized to make practical application.

Avaliação dos preparos da superfície cerâmica para a colagem de acessórios ortodônticos

The purpose of this study was to evaluate the effects of two conditioning methods used to enhance the shear strength of orthodontic brackets bonded to porcelain surfaces. A total of 18 feldspathic specimens were used. The specimens were divided randomly into two groups (n = 9): group free silane, the porcelain specimens were etched with hidrofuoric acid 10% (Acid Gel-Maquira) for 4 minutes followed by adhesive-primer (Transbond XT) and the metallic brackets (Morelli Roth Light .022" x .030") were bonded with a light-cured microfilled resin (Transbond XT Light Cure Orthodontic Adhesive); group silane, the porcelain specimens were etched with hidrofuoric acid 10% (Acid Gel-Maquira) for 4 minutes followed by silane (Silano Ângelus) for 1 minute, adhesive-primer (Transbond XT) and the metallic brackets (Morelli Roth Light .022" x .030") were bonded with a light-cured microfilled resin (Transbond XT Light Cure Orthodontic Adhesive). All specimens were stored in solution of artificial saliva at ambient temperature for 24 hours. The debonding was done with shear strength through a universal testing machine (DL 500-Emic) calibrated with a fixed speed of 1mm/minute. Statical analysis was performed using the Student t test. The results indicated that in the free silane group the mean bond strength was 9,97 MPA, significantly lower than the silane group, that was 12,38 MPa (p < 0,05). The both groups were effective for bonding, although the silane group had the highest bond strength values.

Formulação de extrato aquoso de tremoço branco (Lupinus albus L.) adicionado de suco de pitanga utilizando metodologia de superfície de resposta

The aim of the present study was to verify, through the response surface methodology, the optimum conditions for the combined use of aqueous extract of white lupine (Lupinus albus L.) and tropical pitanga juice (Eugenia unifl ora L.) in the development of a drink. Therefore, the independent variables were represented by the volume of aqueous extract of lupine (mL) and by the volume of pitanga juice (mL). The dependent variables (responses) were obtained through sensory test of acceptance (“appearance”, “aroma”, “taste” and “overall acceptability”). The combined optimization of the variables pointed the second formulation (50mL of aqueous extract of lupine and 30mL of pitanga juice) of the experimental project as the most adequate. In conclusion it was possible to get a drink with attractive sensory characteristics using aqueous extract of white lupine and tropical pitanga juice. The usage of response surface methodology made possible the determination of regions of maximum acceptance for each attribute evaluated in the formulation of a drink with aqueous extract of white lupine and pitanga juice, with a minimum of tests.

Resposta olfativa de fêmeas de Chrysomya Megacephala (F.) (Diptera: Calliphoridae) frente a posturas prévias e caracterização química dos compostos apolares da superfície de seus ovos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Método de modificação da superfície de ligas de titânio e produto obtido

É descrita a invenção de um método de modificação da superfície 5 de ligas de titânio empregando a oxidação anódica em ligas de Ti- 30Ta e Ti-7,5Mo para a obtenção de nanotubos perpendiculares ao substrato com diâmetro de 80-120 nm e comprimento de 100 nm-500 nm.

Contribuições do design gráfico para o design de superfície

Graphic Design is a profession established with advent artistic vanguards of the twentieth century. As professional activity, it works with planning and projects which involve the visual solution of communication and information problems. Then, The Surface Design is the professional practice pledged with the elaboration of projects for coatings and application in products, giving attention to the production and materials in the processes. The relation between both Design areas is connected, at first, by the two-dimensional characteristic. In Brazil, academic study about Surface Design is in evolution and some universities works with this subject. Analyzing the concepts and characteristics concerning methodologies that comprehend both Graphic Design and Surface Design becomes a current and including subject. Therefore, it is necessary the conceptual unfolding and methodological in order to establish relations and contributions involved in the field of Graphic Design and apply them in Surface Design. Thus, the present study aimed to check concepts and particular functions of Graphic Design and to establish its relations and contributions for Surface Design. The results of this study can be used as teaching support and professional practice.

Sensibilização da audição e educação sonora nos exercícios de limpeza de ouvidos: uma incursão na Educação Matemática

The teaching of acoustics has been characterized by a banking model that little contributes to the ideal training of citizens capable of understanding and acting to improve their environment soundscapes. Equally distant from the world of sound and musical culture, audio technology and acoustic environment, it is disconnected from the ever-increasing effort to raise awareness on hearing and sound education, as defended by the Canadian educator Prof. Raymond Murray Schafer. In order to provide elements for reflection on how Mathematics can be itself a language to compete in a sound education, we developed, in a dialogical and problematizing method applied to the technological and cultural world, one further research and teaching with Math students of UNEMAT in Barra do Bugres. This study pointed to the feasibility of educating consciences capable of of improving their acoustic environment, modifying the landscapes where we live, under our responsibility.

Design de superfície - abordagem qualitativa para fachadas corporativas

This paper reports the stage of a research on the corporate identity in commercial buildings. The objective of the research is to develop a system that aims to help the designer to enhance the transmission of the brand identity on the construction. At this step, we looked for the ascertainment of the variables that contribute to it in buildings considered as icons of brand identification in the building. And this paper also presents an analysis of a flagship located in Tokyo, from the Dior brand, which we used Surface Design techniques, combining cultural studies to geometric modeling, to Gestalt and Semiotics.

A percepção visual visando a continuação gráfica na repetição modular do design de superfície

This article narrates from experiences in the classroom, the use of visual perception in the search for the solution of a basic problem of modular repetition, embodied by the lack of continuity in the elements that shape the design surface. Although Wong (1998) approach emphasizes the intuitive and intellectual approach as different parameters for building visual compositions, we list both as participants in the same focus, where the solution starts from the sensory stimulation.

Influência de tratamentos a plasma na resistência à corrosão e na propriedade de adesão de uma camada protetiva sobre a superfície de ligas de alumínio

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito na osseointegração de um novo método de nanotexturização de superfície de implantes através de anodização

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da ativação da superfície de alumínio por íons de mercúrio e formação do amálgama Hg-Al: identificação do produto e cinética de reação

The activation of aluminum surface has the most various purposes as for example the search for the surface activation mechanism and the corrosion products by mercury ions. The objective of this work is to study the reactivity of the surface of aluminum metal when activated by mercury ions (Hg2+), with the consequent formation of an Al-Hg amalgam. Results demonstrate that the kinetics of the reaction, by measuring the mass change with time of the corrosion product formed between Al and Hg, and analysis by infrared spectroscopy (IR) that the product of the reaction between the amalgam, located on the surface, and the atmospheric oxygen is Al2O3 (aluminum hydroxide). The results also indicate that the kinetics of the reaction between the amalgam (Hg-Al) and atmospheric oxygen is of first order and reach a region where there is no more formation of product

Estudo das aplicações das variedades de um quartzo-sienito com hiperstênio, como rochas ornamentais, com auxílio da caracterização tecnológica e das análises de cor e imagem

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)