Obtenção e caracterização de compósitos via RTM com alta fração de fibras de carbono processados à temperatura ambiente

After confirming the high specific mechanical properties of composite materials by scientific studies conducted over the last decades, one of the challenges of this new class of materials is the ability to achieve mass production at a more affordable cost, which has become indispensable. The Resin Transfer Molding (RTM) is an excellent method for manufacturing composite materials. Despite being a process widely used by international companies in the production of high performance structural composites, only a short time the national aviation industry has shown interest in implementing this type of processing to more complex structures and greater structural responsibility. In aeronautical projects, the reproducibility and the relative low cost of this process, several studies have been performed in Brazil for learning and perfecting this technique. This process is suitable for producing polymer components both simple as complex geometry, and allows to achieve consistent thickness, with high quality finish and without limiting range. Polymeric composite components for the high mechanical stress applications such as aircraft structures, satellites, etc., require a strict control of volume fractions of the composite constituents, beyond the knowledge of their mechanical and thermal properties. Therefore, in this experimental work degree study on the mechanical, thermal and of porosity composites processed by RTM processed characterization was performed. This characterization was performed targeting a possible aerospace application of this composite material. For the production of composites, process equipment (RTM RTM injector Radius 2100cc) was used. The processed carbono/epoxy composites were characterized via flexure tests mechanically and thermally analysis via DMA, DSC and TGA. To determine the volume fraction of fibers, the composite samples were analyzed via matrix digestion (ASTM D3171) ... (Complete abstract click electronic access below)

Avaliação do efeito da temperatura na deslignificação com o oxigênio nas propriedades do papel

The deslignification with oxygen, also denominated pre-O2, consists in a whitening stage, which consists of accomplishing an oxidation of the lignin, and remove it with the alkali, providing a larger earnings in the bleaching of the pulp. The pre-O2 is a process already very established, where a significant part of the cellulose of whitened short fiber produced nowadays suffers deslignification for this method. The conditions of work of this stage contemplate directly in the results of the deslignification level, in the physical, optical and mechanics properties of the pulp, and consequently of the paper, because this is important to know their effects fully. The main variables related to the control of this process are respectively: pressure and oxygen load, alkaline load, consistence, time and temperature, being this last variable was the study focus in this work. The objective of the work was to analyze the effect of the variation of the temperature in the oxygen whitening along every bleaching process of the pulp, refine and in the optical, physics and mechanics properties of the paper. The development of the work was based in four temperature levels (90, 95, 100 and 105°C) combined to two whitening sequences (OD0(E+P)D1P and OAHTD0(E+P)D1P). The results obtained in the oxygen deslignification stage indicated that the elevation of the temperature contemplated in increases of the whiteness, deslignification efficiency and in the viscosity loss allied to the reduction of the selectivity of the process. In the remaining of the whitening, the sequence that included the acid hydrolysis presented values slightly inferior of whiteness, kappa number, viscosity and yield in relation to the other sequence when compared with the samples of same temperatures. Already the physical tests showed that the sequence with acid stage amplifies the values of capillary... (Complete abstract click electronic access below)

Avaliação da usinagem do INCONEL 718

The nickel superalloys are known as being a material with poor machinability, they have some properties like high hardness, good resistance at high temperature, tendency to weld with the tool material at high temperature, etc. In the aerospace, biomedical and petrochemical industry, are increasing the need to use materials that resist to aggressive process and environment. In these uses, it has increased the use of nickel-based superalloys like Inconel 718 and consequently the need to research new techniques and tools to improve the machinability of this material. For the superalloys and resistant alloys at high temperatures is considered that the difficulty in the machining regards to the combination of the relatively high cutting forces and high temperatures that grow during the machine process, causing deformation or breakage of the cutting tool. This work purpose is to develop the study of the machining of external cylindrical turning of the nickel based alloy Inconel 718, using ceramic tools, seeking the optimization of machining this alloy, looking to provide real productive increases without the need of investments in new production means. The machining test were accomplished using commercials hard metal tools and the results were compared each other to find the best tool and the best parameter. The conclusion is that the tool TNMG160408-23 -class 1005- was the better one, when used with the parameter 60_15_08

Melhoria da qualidade de um processo de usinagem utilizando as técnicas de avaliação de Taguchi

Delivering to the customers a product or service with the expected quality associated to the huge competitiveness that exists in the market nowadays, has been making organizations increasingly focus on quality planning using techniques which are directed towards the continuous improvement process and production optimization. Thus, this paper aims to improve a machining process using the techniques of experimental design to the optimization and this also includes the analysis of the measurement system. For this purpose, the alloy Nimonic 80A, a nickel base superalloy, was used in the process due to its widespread use for high temperatures, applying this study the robust method proposed by Genichi Taguchi, determining the influence of the factors considered input variables, cutting speed, feed rate, depth of cut, type of tool, lubrication, and material hardness, in the output or response variable, surface roughness, concluding with the use of Taguchi orthogonal array L16 and by analysis of ANOVA that the factor feed rate is significant and offers greater effect on the response variable studied, should be set to 0,12mm/rev. Moreover, the factor type of tool has more influence on the process when compared to other factors, being CP250 the one more suitable to the process. Lastly, the interaction feed rate x cutting speed provides greater significance in the process regarding to surface roughness variable, being the best match between them 0,12mm/rev to the feed rate and 90m/min to the cutting speed. In order to evaluate the measurement system, it was applied the repeatability and reproducibility method (R&R), through which we saw that the system needs improvement (R & R = 88.04% >>> 30%) as the value found in the study was well above compared to the one that classifies the system as inappropriate

O local de nidificação do sabiá-barranco (Turdus Leucomelas) (Aves, Turdidae) afeta a temperatura interna do ninho durante a incubação e cuidado à prole?

Individuals of the species Turdus leucomelas are adapted to live in environments already modified by humans, thus obtaining reproductive success in their nesting in vegetation, as well as built their nests in human buildings. Nests found in buildings are often less camouflaged, making them more exposed to predators compared to nests built in vegetation; however the nests built buildings are common, indicating a possible advantage associated with these nests. By means of this idea if was assumed that a possible advantage to this construction in buildings is linked to a change in variation in the internal temperature of the nest during incubation and development of pups until they leave their nests. Accordingly, with the aid of iButtons and TidBits (temperature data loggers), the present study aimed to analyze the influence of the nesting site on how the temperature is kept, and how it changes in the microenvironment in which the nest is inserted, indicating potential benefits associated with that choice. In the samples found with the vegetation, temperature data showed a pattern of temperature of the microenvironment of the nests is not very stable, varying with ambient temperature, whereas in the samples found with the human constructions, the temperature data showed a pattern of temperature microenvironment nests more stable for a long time. When comparing the two environments which they settled nests, as well as the different times of day (daytime and nighttime), how the temperature was kept and pattern of change within the nest was significantly different (F=43.85, p<0.001), with higher and more constant internal temperatures in nests installed in construction, compared to vegetation. When observing periods of the day, it was found that in both environments the temperature inside the nest reached higher values and higher than the environment at night, coinciding with the rest of the female at night. Data may suggest changes in the...

Usinagem da liga de níquel inconel 718 com pastilhas de cerâmica

The machining of super alloys resistant to high temperatures such as nickel alloys, inconel 718 specifically, is a very difficult job to obtain improvements in the process, due to the difficulty of machining at high cutting speeds, the use of these alloys in industries showed great developments in recent years, its application in aeronautical industry spread being used in vane turbo, compressor parts, props and set elements. The automotive, chemical, medical and others also took advantage of the great features of inconel 718 and has used the material. The high temperature resistant alloys have high machining difficulty, a fact that is associated with high cutting forces generated during machining which result in high temperatures. High levels of temperatures can cause deterioration of the cutting edge, with subsequent deformation or breakage, wear most common obtained in machining such materials are flank wear the formation of built-up edge for cutting and notch wear. The experimental part of the work consists in machining of nickel-based alloy Inconel 718 heat treated for hardness, using a tool based ceramic silicon nitride Sandvik (Si3N4) in order to compare the best results obtained in the master's thesis of SANTOS (2010) who used a tool ceramics also the basis of silicon nitride which was developed in the doctoral thesis of SOUZA (2005). Assays were performed on a CNC lathe and was noted for each cutting edge results obtained. Tests were made starting from an initial condition of the tool with cutting speed of 200 m/min, feed 0.5 mm and 0.5 mm depth of cut was reduced cutting speed for the subsequent tests with the same conditions of feed and depth of cut. The tool presented wear instant under two 200 m/min and 100 m/min, premature rupture of 50 m/min and finally cut provided with difficulty... (Complete abstract click electronic access below)

Auxílio na tomada de decisão na compra de uma máquina de usinagem a laser

Decision making is one of the most important factors for growth and future, both from a business, as in people's life and attitudes in the simplest of everyday day. This work aims to assist decision making in buying a laser cut machine, a manufacturer of auto parts and wheels, and later this technique can be considered to acquisition of other equipment. In this case was used the AHP to aid the decision by multiple criteria. First we analyzed the most important criteria of the current machine for the application of the method and were later made the application and sensitivity analysis

Otimização do processo de usinagem da superliga nimonic 80A utilizando o Método de Taguchi

Atualmente, atender as necessidades dos consumidores é uma das metas mais importantes, os consumidores estão em busca de produtos com qualidade e preços mais acessíveis, para isso, é indispensável que as empresas se atualizem para melhorar seus produtos e serviços. Com este cenário, as superligas estão cada vez mais ganhando mercado, pois possuem ótimas propriedades, principalmente em relação a operar em temperaturas elevadas, podendo proporcionar maior eficiência para motores que necessitam trabalhar em altas temperaturas. Em contra partida a essa vantagem, as superligas possuem uma baixa usinabilidade, sendo importante a análise do processo de usinagem para se tornarem mais aplicáveis. Este trabalho visa à otimização do processo de torneamento cilíndrico da superliga Nimonic 80A, com o intuito de melhorar a qualidade do produto, utilizando o Método de Taguchi, com o arranjo ortogonal L16, sendo o comprimento de corte definido como variável resposta e analisados seis fatores que poderiam influenciar na sua variação, tais fatores são: velocidade de corte, avanço, profundidade de corte, tipo de pastilha, lubrificação e dureza do material. Os resultados obtidos demonstraram que os fatores avanço, tipo de pastilha e lubrificação são significativos e exercem influencia no processo, sendo que o avanço deve ser ajustado no nível de 0,12 mm/rev, a pastilha a ser utilizada deve ser CP250 e a lubrificação deve ser feita de maneira abundante, para a otimização do processo. Com a análise dos resultados, também podemos observar a eficiência e confiabilidade do método utilizado, mostrando resultados coerentes

Determinação da temperatura para inativação da urease em amostras de casca e farelo de soja

s not degraded in the rumen but destroy ureasis. Soybean meal is one of the protein ingredients commonly used in formulations of animal feeds. In the diets of monogastric bran has high protein content provided by a greater separation of soybean hulls. For the ruminant protein value of the meal is lower with the inclusion of soybean hulls to reduce the level of protein. With the increased consumption of meal high protein, due to increases in production of pigs and poultry in recent years, increasing the availability of soybean hulls on the market, this is because soybean hulls is little understood in the feeding of monogastric . In this context, the main objective of this study was to determine the times and temperatures needed to ensure the effective inactivation of ureasis present in the bran and soybean hulls. According to the assessments, to make the determination of temperatures and times required for the inactivation of ureasis present in the bran and soybean hulls are 170 º C and 25 minutes for soybean meal and 140 ° C 10 minutes for soybean hulls, respectively

Redução do tempo de setup de máquinas de usinagem em uma industria automobilística

Continuous improvement of industrial processes is one way to become companies more competitive in the market. For this, a fairly widespread use is the methodology of lean production systems, by eliminating waste. One of the tools of these systems is the method of rapid exchange of die or also called SMED, which will be applied in this study. The study aims to develop proposals for reducing the time of set up of two machines in two machining lines, watching also the ergonomics and safety conditions in this operations. The set up time reduction is justified among others, due to increase the machine productivity. In applying the connecting rod machining line, there were two types of exchange. Reductions in time to set up proposals reached values of 47% to one of them, and 55% to the other. It is important to underline that to reach this result, there was no need for large investments. In the application in block machining line, was developed an improvement in the ergonomic area. It was placed a pulley block that came to increase the time of tool change. Aiming to improve the security of the exchange, without productivity loss, the method was applied to reduce this time. It was developed two proposals.: the first would reduce that time by 19%, and does not require many resources of the company. The second involves the parallelization of the exchange, so that the reduction is 48%. However, this proposal requires one more manpower at the time of exchange and it is not always possible

Análise da supressão do fenótipo de sensibilidade a temperatura do mutante tif51A Q22H/L93F em Saccharomyces cerevisiae

O fator de início da tradução de eucariotos eIF5A é uma proteína essencial para a viabilidade celular, altamente conservada em arqueas e em eucariotos e apresenta uma modificação pós-traducional única em que um resíduo específico de lisina é modificado para o aminoácido hipusina. O processo de hipusinação é essencial para a função de eIF5A e consequentemente para a viabilidade celular. eIF5A foi descrita inicialmente como um fator de início da tradução, pois estimula a síntese de metionil-puromicina in vitro, porém, dados recentes de nosso e de outros grupos mostraram um papel para eIF5A na etapa de elongação da tradução. eIF5A é um homólogo estrutural do fator de elongação da tradução P (EF-P) de bactérias. EF-P também estimula a síntese de metionil-puromicina, sendo essencial para viabilidade celular em bactérias, além disso EF-P também apresenta uma modificação pós-traducional semelhante à hipusinação. Recentemente, em nosso laboratório, foi isolado o RNA transportador de alanina (tRNAAla) como supressor do fenótipo de sensibilidade a temperatura do mutante tif51AQ22H/L93F de eIF5A, sugerindo uma possível correlação funcional entre estes fatores. Tendo em vista a homologia estrutural entre eIF5A e EF-P e a possível homologia funcional entre estes fatores, pretende-se entender a relação de eIF5A com o tRNA de alanina e com isso contribuir para a caracterização do papel específico desta proteína na elongação da tradução. Portanto, foram clonados diferentes genes que codificam para diversos tRNA´s (glicina, leucina, prolina, metionina e fenilalanina) para averiguar se a supressão observada para o tRNA de alanina também pode ser vista com estes outros tRNA’s ou se é específica. Considerando-se que eIF5A foi descrita a mais de trinta anos sem que sua função específica fosse caracterizada, este estudo pode contribuir... (Resumo completo, clicar acesso eletrônico abaixo)

Análise da supressão do fenótipo de sensibilidade à temperatura do mutante tif51AK56A em Saccharomyces cerevisiae

O fator de início da tradução de eucariotos 5A (eIF5A) é uma proteína essencial para a viabilidade celular, altamente conservada em arqueas e eucariotos e apresenta uma modificação pós-traducional única em que um resíduo específico de lisina é modificado para o aminoácido hipusina. O processo de hipusinação é essencial para a função de eIF5A e consequentemente para viabilidade celular. eIF5A foi descrita inicialmente como um fator de início da tradução pois estimula a síntese de metionil-puromicina in vitro, porém, dados de nosso e de outro laboratório mostraram um papel para eIF5A na etapa de elongação da tradução. eIF5A é um homólogo estrutural do fator de elongação da tradução P (EF-P) de bactérias. EF-P também estimula a síntese de metionil-puromicina, sendo essencial para viabilidade celular em algumas espécies de bactérias. Dados recentes mostram que EF-P, bem como eIF5A participam na etapa de elongação da tradução facilitando a tradução de sequências de parada, “stalling motifs”. Foi isolado, em nosso laboratório, o gene que codifica para o tRNA de alanina como supressor do fenótipo de sensibilidade a temperatura do mutante tif51AK56A, sugerindo uma possível correlação funcional entre estes genes. Para compreender o mecanismo de supressão e estudar a relação com outros tRNAs este estudo foi proposto e realizado.

Comportamento da temperatura da massa de resíduos aterrados em um aterro sanitário

In this paper we investigate the temperature variation of the mass of waste along the depth in a household waste landfill of Rio Claro - SP, São Paulo, having a climate characterized as Tropical Altitude. In this research, there were two holes in two distinct points of the landfill, with different depths and characteristics in order to fix several thermal sensors - RTDs - to record the temperature at predetermined depths. Overall, the results show the influence of temperature at depths of up to 3.0 meters (from the surface) and that it varies in a manner to stabilize at depths above 5.0 meters. The highest temperature obtained was approximately 37.5 ° C for a time of waste disposal of 7 to 10 years. The results showed the presence of organic matter (substrate) which resulted in elevated temperature resulting from biological activity

Avaliação reológica do óleo de abacate (Persea americana mill) e estudo da estabilidade sob condições de aquecimento e armazenamento à temperatura ambiente

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A influência da temperatura nas impedâncias de sequência de condutores utilizados na rede primária de distribuição

Distribution networks are formed by long lines that carry electricity substations to homes and industries. These lines have associated impedance and depending on operating conditions of the network these impedances may vary. This paper provides a detailed analysis of the effects observed in studies of voltage drop, short circuit and electrical losses, when considered the drivers sequence impedances used in primary distribution network at different temperatures. Therefore, it is initially presented a calculation methodology and details the factors that influence the final values. The methodology presented tackles in a practical way the main factors that directly or indirectly influence the values of the impedances as an emblematic example and will be properly dealt with throughout the paper is the effect of temperature on the values of the sequence impedances. More specifically is dealt with the case of XLPE cables protected, by having a higher maximum operating temperature than the operating temperature of the network. The effects observed in the power flow generated when considering the impedance values at both temperatures were analyzed. The impedance drivers tend to increase with increasing temperature. Thus the impedance of the conductor XLPE protected will tend to be greater for the maximum operating temperature for which the operating temperature of the network, resulting in greater voltage drop and higher electrical losses