Características morfológicas dos músculos e qualitativas da carne de cordeiros suplementados e terminados em diferentes índices de área foliar residual

Pós-graduação em Zootecnia - FCAV

Nutrição mineral e escleromorfismo foliar de grupos funcionais e comunidades vegetais savânicas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of working pressure at different spray nozzles on drift quantification in wind tunnel

Each year, there is an increase in pesticide consumption and in its importance of use in the large-scale agricultural production, being fundamental the knowledge of application technology to the activity success. The objective of the present study was to evaluate the influence of working pressure on the drift generated by different spray nozzles, assessed in wind tunnel. The treatments were composed of two spray nozzles AXI 110015 and AXI 11002 with pressure levels of 276 and 414 kPa. The spray solution was composed by water and NaCl at 10%. The applications were conducted at wind speed of 2.0 m s-1, being the drift collected at 5.0; 10.0 and 15.0 m away from the spray boom and at heights of 0.2; 0.4; 0.6; 0.8 e 1.0 m from the tunnel floor. To both spray nozzles, the greatest drift was collected at the smallest distance to the spray-boom and at the lowest height. The AXI 11002 nozzle gave a smaller drift relative to the AXI 110015 nozzle for the two tested pressures and for all the collection points. Regardless of the nozzle, a rise in the working pressure increases the spray drift percentage at all distances in the wind tunnel.

Influence of spray mixture volume and flight height on herbicide deposition in aerial applications on pastures

The objective of the present study was to analyze the influence of spray mixture volume and flight height on herbicide deposition in aerial applications on pastures. The experimental plots were arranged in a pasture area in the district of Porto Esperidião (Mato Grosso, Brazil). In all of the treatments, the applications contained the herbicides aminopyralid and fluroxypyr (Dominum) at the dose of 2.5 L c.p. ha-1, including the adjuvant mineral oil (Joint Oil) at the dose of 1.0 L and a tracer to determine the deposition by high-performance liquid chromatography (HPLC) (rhodamine at a concentration of 0.6%). The experiment consisted of nine treatments that comprised the combinations of three spray volumes (20, 30 and 50 L ha-1) and three flight heights (10, 30 and 40 m). The results showed that, on average, there was a tendency for larger deposits for the smallest flight heights, with a significant difference between the heights of 10 and 40 m. There was no significant difference among the deposits obtained with the different spray mixture volumes.

Estimativa da área foliar de Euphorbia heterophylla

Leaf area estimate may contribute to understand the relationships of interference among weeds and crops. The objective of this research was to obtain a mathematical equation to estimate the leaf area of Euphorbia heterophylla based on linear measures of the leaf blade. Correlation studies were carried out using the real leaf area and leaf length (C) and the maximum leaf width (L) of 200 leaf blades which were collected from several agroecosystems at Universidade Estadual Paulista in Jaboticabal, SP, Brazil. The evaluated statistic models were: linear Y = a + bx; simple linear Y = bx; geometric Y = ax b; and exponential Y = ab x. All of the evaluated models can be used for E. heterophylla leaf area estimation. The simple linear regression model is suggested using C*L and taking the linear coefficient equal to zero. Thus, an estimate of the leaf area of E. heterophylla can be obtained using the equation Af' = 0.6816*(C*L).

Effect of adjuvants on the amount of air included in droplets generated by spray nozzles

The air included in droplets generated by spray nozzles directly int0erferes in transport, deposition and retention of the droplets after its impact on the target. The objective of this study was to analyze the interference of adjuvants in the amount of air included in droplets generated by spray nozzles. The treatments were composed by four spray solutions containing mineral oil, vegetable oil, surfactant and water, and three spray nozzles, two air induction type and one pre-orifice. The air included was calculated by the difference between the volume of spray mix (air plus liquid) and only the liquid, which was made by means of sprayed samples captured in a funnel and collected in a graduated cylinder. The surface tension was estimated by the gravimetric method using a precision scale and a graduated pipette. The surfactant provided the largest percentage of air included in the spray. For the surface tension, the mineral oil and the surfactant had the lowest values. It was concluded that the use of adjuvants had a direct influence on the percentage of air included. In addition, products with greater ability to reduce surface tension and to form homogeneous solutions provided the increase in the percentage of air included in the droplet.

Estimativa da área foliar de Panicum maximum usando dimensões lineares do limbo foliar

The objective of this study was to obtain a mathematical equation to estimate the leaf area of Panicum maximum using linear measures of leaf blade. Correlation studies were conducted involving the real leaf area (Sf), the main vein leaf length (C), and the maximum leaf width (L). The linear and geometric equations related to C provided good leaf area estimates. For practical reasons, the use of an equation involving only the C*L product is suggested. Thus, an estimate of P. maximum leaf area can be obtained by the equation Sf = 0.6058 (C*L), with the coefficient of determination R = 0.8586.

Secagem de celulases de origem fúngica por spray-drying

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Micropartículas lipídicas sólidas obtidas por spray drying para liberação intraocular de ibuprofeno

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aplicação foliar de indutor de resistência em feijoeiro comum: efeito sobre desempenho da cultura, qualidade fisiológica e sanitária das sementes

Pós-graduação em Agronomia - FEIS

Anatomia foliar e análise de EDX de Costus spiralis (Jacq.) Roscoe de ambiente impactado e não impactado do litoral de São Paulo.

Several plants show morphological changes when exposed to environmental stress. We aimed to analyze comparative anatomy and EDX (energy dispersive x-ray detector) of Costus spiralis (Jacq.) Roscoe leaves from Jureia-Itatins Ecological Station (Peruibe, Sao Paulo), a preserved area, and Mogi River Valley (Cubatao, Sao Paulo) an affected area by pollution from the industrial complex of Cubatao. There were some significant differences in the leaves from the affected area, where they had a smaller abaxial hypoderm, larger size of adaxial hypoderm and larger central vascular core. There were damages in epicuticular wax deposition. The EDX analyses presented only differences in calcium and potassium concentration and presence of manganese in Cubatdo samples. Those leaves presented crystal deposition in the vascular core, probably because of the phosphogypsum residues from fertilizer industries.

Phytase production by Rhizopus microsporus var. microsporus biofilm: characterization of enzymatic activity after spray drying in presence of carbohydrates and nonconventional adjuvants

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structural and thermal properties of spray-dried methotrexate-loaded biodegradable microparticles

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

On the distinct molecular architectures of dipping- and spray-LbL films containing lipid vesicles

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modelagem da área foliar de duas cultivares de amendoim em função das dimensões lineares dos folíolos

The purpose of this study was to determine a shape factor to estimate area of leaflets of two peanut cultivars (IAC TATU ST, IAC RUNNER 886). Correlation studies were conducted involving real leaf area (Sf) and leaf length (C), maximum leaf width (L) and the product between C and L. For each cultivar was determined a form factor (f) by means of regression analysis between the product of the length by the width and the actual area of leaves and the correlation between leaf area estimated by the correction factor and direct measurement. All evaluated models (linear, exponential or geometric) provided good estimates of leaf area (above 87%). Linear models had the best fit, passing or not through the origin. From a practical viewpoint, it is suggested to use the linear model involving the C and L product, using a linear coefficient equal to zero, with values of factor f equal to 0.7111 and 0.7266 for IAC RUNNER 886 and IAC TATU ST, respectively. The method of dimensions is feasible for the estimation of leaf area for both peanut cultivars, for showing good r(2) values (0.97), with errors below 3%, even when used with independent data.