Remoção de cromo de resíduos de curtumes por argilitos da formação Corumbataí - SP

The tanning wastes are characterized to be significant sources of pollution in the hydrosphere when non adjusted or disposed adequated form. That happens because this industry type uses the chromium to tan hides, and this element is present in discharges concentrations in final wastes, characterizing this waste type as dangerous, according to the Associação Brasileira de Normas Técnicas, através da Norma Brasileira 10.004 de 2004. Due to this, the research proposes a form to reduction chromium of the tanning wastes through the process of adsorption. For that were used mining-wastes of Corumbataí Formation clays, material commonly used in the production of ceramic products in Rio Claro (SP). They were accomplished laboratory essays that involved the preparation of different clays pulps and subsequent mixture of these with the tanning wastes, maintaining them under different mixing times and adsorption contacts. After the separation of the mixtures, the leached were chemically analyzed and it was seen the efficiency of chromium reduction and your relationship with the variation of different times of contact clays/wastes and different grain sizes used in the pulps preparation.

Diagnóstico da gestão e do gerenciamento dos resíduos eletroeletrônicos gerados no campus da Faculdade de Engenharia de Guaratinguetá/Unesp

Currently, in Brazil, the quantity and quality of new types of wastes, discarded without criteria in urban areas, has been responsible for considerable impacts on public health and the environment. According to a report prepared by the Institute of Applied Economic Research (IPEA), the country loses about U.S. $ 8 billion annually, due lack of waste recycling, which go directly into landfills or dumps. Among these solid wastes are waste electrical and electronic equipment (WEEE), whose characteristics are complex, by having in its composition substances of high value-added and other health hazards which require different treatment of household waste. Aiming to fill the gap in Brazilian environmental legislation, on 02/08/2010, was sanctioned the National Policy Solid Waste (Law No. 12,305), already regulated on 23/12/2010 (Decree No 7404), whose based on the following principles:reduction of waste generation and toxicity of shared responsibility, proper planning management, social inclusion of waste pickers and sustainable production and consumption. Given the above, this work presented here, aims generally present a diagnosis of the current situation of electronic waste generated in the Faculty of Engineering, Campus Guaratinguetá, FEG / UNESP, to provide data for management and management of these waste, based on sustainability, the economic losses and minimizing environmental impacts and public health related to the flow and the improper disposal of these wastes

Subsídios para o gerenciamento de resíduos de serviços de saúde em municípios de médio porte: estudo de caso de Araraquara - SP

The Health Care Wastes (HCW) present serious risks to health and to the environment, if incorrectly managed, because in addition to the presence of pathogenic agents, the may pollute the soil and the water. Thus, a study was performed aiming at diagnosing the HCW management in Araraquara (SP), identifying the difficulties of the agents (municipal gestors and managers of institutions which generate this wastes) in implanting the HCW management Plan (HCWMP) proposed by ANVISA, in order to subside the HCWMP implantation. The methodology was based on question applications in health centers selected to be the samples, and on quantitative data related to the phases of Treatment and Final Disposal, provided by DAAE. As a result, it was observed that a great part of the interviewed centers managed these wastes according to norm RDC no 306/ 2004 of ANVISA. However, only 24% of the interviewed centers knew about this norm, and only 22% of them had the HCWMP. The difficulties in managing the HCW concentrated in the correct segregation of theses wastes in the generation source. The large number of people involved in this phase suggests the causes of the difficulties.

Avaliação da toxicidade da vinhaça utilizando Oreochromis niloticus (Perciformes: Cichlidae) como organismo teste

Contamination of rivers and lakes, waste disposed by infiltration into the soil as fertilizer, for example, has been highlighted around the world, since such compounds can contain toxic elements, causing changes in aquatic and/or terrestrial ecosystem. Due to the possible presence of these elements in these wastes, it is possible assess damage to organisms exposed through breaks in genetic material and mutations. In this sense, this work aimed at exploring the cytotoxic, mutagenic and genotoxic vinasse pontential, residue used as fertilizer, from the processing of sugar cane into alcohol, using fish (Oreochromis niloticus - Cichlidae) as a test organism. The individuals were exposed to different dilutions of vinasse in the water and later carried out analysis of their erythrocytes using the micronucleus test and nuclear abnormalities associated and the comet assay. In the first bioassay, tilapia exhibited 5% and 10% vinasse concentrations died after 48h. The number of micronucleated erythrocytes was statistically significant for the 1% vinasse concentration and also for nuclear abnormalities such as broken-egg and nuclear bud, when compared with negative and positive controls; were also significant lobed type erythrocytes, when compared to the negative control. The test results of the comet assay were not significant for 1% vinasse when compared to the negative control, due to the high rate of comets with damage control, which is unusual. The same was observed for changes as notched and blebbed type. In the second chemical analyzes conducted, the detection of heavy metals in the vinasse sample, charged only the presence of copper and chromium, the latter with a concentration 89 times higher than in the first test. Differentially the first bioassay, fish exposed to dilution of 5% did not die... (Complete abstract click electronic access below)

Avaliação da erosão hídrica, transporte de sedimentos e qualidade da água na bacia do córrego Monjolo Grande

Understanding the linkages between the natural elements is essential for being promoted the land use, occupation and sustainable management of environmental systems. Universal Soil Loss Equation (USLE), as a predictive model of erosion, is important to allowing the prevention of possible environmental impacts which may drastically interfere in natural or anthropic environments, as well as prevent potential financial wastes and even contribute to greater efficiency of agricultural production. This research will be working some USLE parameters, emphasizing topographic factor from Ribeirão Monjolo Grande watershed. Among the factors considered by the USLE, the Topographic Factor interferes directly in the erosive dynamic of a watershed because it involves variables related to hydrological processes that occur on it. In this research, were discussed different methods for obtaining the Topographic Factor (BERTONI e LOMBARDI NETO, 1985; MOORE e BURCH, 1986; DESMET E GOVERS, 1996) in GIS environment. After comparison between the methods, was indicated that best represents the conditions of geometry strand of the study area. Finally, other factors (R, K, C, P) considered by the USLE were obtained. The attainment of these parameters were guided by the use of geotechnologies, especially in Geographic Information Systems (GIS), with the assistance of secondary data and periodic field visits. The results obtained contributed to the understanding of hydrosedimentological dynamic in this area and serve as a viable strategy for studies of soil loss, aiming at developing consistent material for future researches about environmental planning and land management

Cooperviva: análise das possibilidades e limites do trabalho dos catadores de resíduos recicláveis de Rio Claro (SP)

The issue of waste, historically, has been getting worse as a result of the world´s population increase and in order to meet their needs the consumption of natural resources and the generation has been constantly increasing, especially in large urban centers. The people involved in the collection of recyclable solid waste, called from now on as collectors, are responsible for about 90% of the waste sent to recycling industry in Brazil. Apart from having a role in the economy, the collectors have specific knowledge and skills necessary to identify, collect, sort and sell these wastes. This study aims to examine the possibilities and limits of COOPERVIVA – Cooperativa de Trabalho dos Catadores de Material Reaproveitável de Rio Claro - as an instrument of the municipal solid waste management system, and its experience as a recyclable waste collectors cooperative. The methodological procedures of this study rely on the literature research on the experiences of cooperative and the management of municipal solid waste. In addition to this review of the literature, fortnightly visits to the cooperative were held in order to experience their daily activities, and testimonies of the cooperative members were collected as well as documents and reports produced by COOPERVIVA. The results of this analysis are considerations of the limitations of the cooperative and recommendations aimed at maximizing their potential as a tool of the domestic solid waste management system of and as a recyclable waste collectors cooperative. Among other things it can be concluded that the urban selective collection of waste challenges the community to the reinvention of life and the relationships each individual with the planet.

Estudo sobre eficiência energética em uma unidade industrial

This work contemplates an opportunities study of the rational use of energy in an industrial unity from the demand analysis and electrical energy consumption. Through a guide of energy analysis it was described how to find the main problems that create energy wastes in an industry, showing the ways so the production processes avoid such wastes and start to use energy in a more sensible e efficient way. It was also studied, the technical e economical viability of possible interventions to be implemented in terms of energy conservation and of possible demand supply alternatives

Análise ambiental em um canteiro de obras

The building sector can cause the environmental degradation, by the natural resources consumption, machinery use and natural landscape modifying. The environmental management system (EMS) improves the environmental quality and makes the companies more competitive. So, this work developed an environmental management system in a building site focused on the solid waste and in the development of mitigation proposals for the most significant environmental impacts. To develop this work it was necessary to follow the building site activities; evaluate the solid waste management; identify the law requirements; identify the environmental aspects and impacts; evaluate the environmental impacts; and propose alternatives for mitigating the adverse environmental critical impacts. The main proposals are the reduction of the waste generation in the place that it’s generated; the reuse and correct final disposal of that wastes; the treatment and reuse of the effluent; and the supervising in the trucks and machineries avoiding the oil spilling and the air pollution

Avaliação estratégica de um plano de gestão de resíduos sólidos com foco nos resíduos orgânicos

One of the greatest problems nowadays is the correct management of solid waste produce in every human activity. On 2010, the “Política Nacional de Resíduos Sólidos” was approved, this law brings directives and instruments to deal with the solid waste issue. The objective of this work is to make a Strategic Assessment on a Solid Waste Management Plan applied to a medium size city. Based on general data about the situation of the solid wastes in Brazil, a first scenario was described. After that, likely scenarios were proposed, taking segregation, treatment and final disposal on account. Finally, those scenarios were compared, mainly in the final volume disposed and costs involved

Diagnóstico dos resíduos de construção e demolição: uma contribuição à elaboração e implantação da gestão integrada dos RCD no município de Guaratinguetá – SP

The problem of solid waste has caused discussions about the huge amount that is generated in Brazilian cities, in particular the waste from construction and demolition (CDW), called spoil. In many cases these wastes are disposed of improperly and even criminally in urban areas, causing serious economic, social and environmental problems. Due to the lack of public policies and appropriate management of such waste came up with the CONAMA, in its resolution nº 307 of 2002, the obligation of municipalities in deploy the integrated management of construction and demolition wastes for the resolution of problems caused by inadequate management and disposal of such waste. By following a methodology suggested by Pinto & González (2005), with adaptations of other authors, it is proposed in this work the lifting of a diagnosis of the CDW in the municipality of Guaratinguetá-SP, through theoretical analysis and field research, with purpose to guide the public servants in the elaboration and implementation of integrated management. The results must contain information necessary for that end, such as the knowledge of generators, agents, collectors and transporters, disposition areas and the disposal of waste

Tratamento orgânico de resíduos de rúmen bovino

The organic wastes need to be adequately managed, in order to avoid the environmental pollution and damage to the public health. So, this work aimed to study the composting process using two methods: manual and mechanized, for the treatment of bovine ruminal waste. This residue is generated in large proportions during the bovine slaughter process, and it can lead environmental degradation and contamination, or even damage to the public health, when not treated. For the initial adjustment of the composting parameters, it was incorporated the residue of coffee husks. The manual composting system was done by the manually aerated piles, while the mechanized composting system was done in a reactor coupled to a compressor that enabled the aeration of the system. The proportions used in both systems were: 90% bovine rumen (R) and 10% coffe husks (CC); 85% bovine rumen and 15% coffe husks; 80% bovine rumen and 20% coffe husks. The parameters determined during the monitoring of the composting process were: temperature, pH, moisture, organic matter, ash, organic carbon, Kjeldahl nitrogen and C/N ratio. The results obtained during the monitoring of the piles and reactors presented similar behavior, except for the parameters Kjeldahl nitrogen and C/N ratio. When compared to the “Instrução Normativa no 25 de 23/07/2009 do Ministério da Agricultura, Pecuária e Abastecimento”, the organic produced composts with the best results were: pile 2 (85% R; 15% CC) and reactors 1 (90% R; 10% CC) e 2 (85% R; 15% CC)

Identificação de boas práticas e dificuldades do SMED aplicado em uma indústria do ramo de cosméticos

The cosmetic industry has presenting growth in Brazil and one way to support this demand is improving production and reducing waste. Wastes can be related to setup time, which is spent to support demand of product´s mix and volume. One of the methodologies used to reduce setup time is SMED (Single Minute Exchange of Die). This paper aims to describe and analyze the setup process in a production line in a cosmetic industrial branch, before and after the application of SMED methodology, highlighting good practices and difficulties in order to help other companies develop fast setup. The research method used was the case study. From the analysis of the implementation of the methodology on the company which is object from the case study was possible to summarize good practices, such as: the use of pillar E&T to store information about the training on the SMED methodology; creation of a multifunctional teamwork and involving different areas; creation of a “From-To” matrix. Difficulties were identified, such as: high and constant turnover of people who work on the shop floor; lack of discipline in filling the forms and by doing the setup activities that were standardized; lack of financial resources; lack of people´s availability in orer to conduct necessary meetings and trainings. Recommendations for other companies have also been proposed, such as: training of the team involved, before starting the project and a refresher training; standardization of training, forms and documentation of all steps of the project; create a multifunctional team; training after an employee, who is responsible for the setup, leaves the company

Considerações gerais sobre os resíduos eletrônicos

As new technologies improve, people’s lives gain in comfort and accessibility. However, along with these technologies comes a growth in “soon to fall into disuse” product consume, either because they have reached the end of their life cycle, or because they were substituted by newer and more advanced models. These electronic wastes are still with no certain destination, and could be donated to welfare companies, but the majority is thrown in wide open dumping grounds or landfills, where they can contaminate water and soil with their toxic components. This work seeks to evaluate the e-waste concept, their impacts in the environment and human life, as well as the current national and international e-waste management and destination, finally reflecting on international decisions that would be appropriate for the Brazilian system.

Implementação da metodologia TPM em uma indústria do setor de higiene pessoal, saúde e beleza

This work presents a project of Action Search in a consumption industry of the sector of personal care, health and beauty. Following the implementation steps of Autonomous Maintenance Pillar of TPM methodology, stands for Total Productive Maintenance, this work aims to ensure the advancement of some machines in a production line of the company to the next steps of the methodology implementation, demonstrating the results achieved by the TPM. In the company in question, the TPM has been implemented in the past but lost strength over the years and some of its concepts were abandoned, producing then a drop in the equipments efficiency, increased wastes and breaks in the processes, as well as loss in product quality. Then, the need arose to restart the implementation process from the beginning, to strictly follow all the steps of the methodology, ensuring increased efficiency of equipment and processes. Through training and a changing in the company culture, it was possible a joint effort between Operation and Maintenance in order to enhance the knowledge of the operators on their machines. Initially, it was developed a general cleanliness program of equipments so that it could be possible to find the anomalies in the process. Subsequently, operators and maintainers were trained to detect anomalies, enabling equipments to work under their basic conditions of operation and subsequently building provisional standards of equipment cleaning, lubrication and inspection. Through the improvement presented by some indicators such as OEE, wastes, bankruptcies and unavailability, it was proved the importance and the positive effects of TPM implementation in manufacturing

Produção e aplicação de adubo orgânico, proveniente da compostagem de resíduos da FCT/UNESP

This work presents the objective of producing organic fertilizer from the waste generated at FCT/UNESP and its use in the growing sunflower. For this, there were collected wastes of pruning/weeding and organic waste from the canteen. It were made two types of treatments, one conventional and the other mechanized, using three mass ratios: ratio 1 (30% wastes of pruning/weeding (RP) + 70% organic waste (RC)), ratio 2 (50% RP + 50% RC) and ratio 3 (70% RP + 30% RC). The conventional system was done windrow with turning manual and the mechanized system was developed in reactors by injecting compressed air. The compounds produced were analyzed in terms of pH, organic matter, organic carbon, mineral residue, nitrogen, phosphorus and potassium, which could be compared to the values stipulated by the Instrução Normativa n° 25 de 23/07/2009 do Ministério da Agricultura, Pecuária e Abastecimento. The compounds produced were used on growing sunflowers in 14 different conditions for the systems manual and mechanized, totaling 26 treatments with the following proportions... (Complete abstract click electronic access below)