Deterioração da madeira de Eucalyptus spp. por fungos xilófagos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aplicações sucessivas de lodo de esgoto no girassol e efeito residual no trigo e triticale

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Nitrogen fertilization (15NH4NO3) of palisadegrass and residual effect on subsequent no-tillage corn

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Produção de nanocompósito utilizando diferentes fontes de celulose como reforço

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Produção e imobilização de celulases em matriz de agarose com diferentes ativações químicas

Pós-graduação em Biotecnologia - IQ

Consumo alimentar residual e produção de metano entérico de bovinos em confinamento e pastagem

Pós-graduação em Zootecnia - FCAV

Caracterização química, física e anatômica do bambu Guadua tagoara para polpação Kraft

Pós-graduação em Engenharia Mecânica - FEG

Determination of tetramethylthiuram disulfide (thiram) for residual analysis in food using spectrophotometry coupled with a solid-phase reactor (SPR) in a flow system

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

TANZANIA GRASS STRUCTURE GRAZED BY GOATS MANAGED WITH DIFFERENT RESIDUAL LEAF AREA INDEX UNDER INTERMITTENT STOCKING

The objective of this study was to evaluate the structure of Tanzania grassland grazed by goats managed with different residue leaf area index (RLAI) under intermittent stocking. The experiment was carried out from February to August, 2008. The treatments consisted of three different targets RLAI (0.8, 1.6 and 2.4) and 95% light interception (LI) criterion determined the rest period. Forage samples were collected at average height sampling points and weighed. Subsequently, a smaller sample was removed to separate the morphological components (leaf, stem and dead material) and to determine the structural and productive features. The canopy architecture was evaluated by the method of inclined point quadrat. The pre-grazing height in the paddocks were significantly different among treatments. RLAI influenced dry matter contents of green forage, leaf, stem and total, with the exception of dry matter of dead material, where the lowest values were observed for 0.8 RLAI. Thus, RLAI modifies canopy structure and is sensitive to canopy height changes throughout the year. Pasture regrowth is not compromised by residual leaf area indexes between 0.8 and 2.4, when climatic factors are not limiting.

Levantamento para a implantação de um sistema de gestão da qualidade segundo a norma NBR ISO/IEC 17025:2005 no Laboratório de celulose e papel da UNESP-Itapeva

The aim of this study is to perform a situational analysis of the Laboratory of pulp and paper-UNESP ITAPEVA for conducting proposal the accreditation according to ISO / IEC 17025:2005. The ISO / IEC 17025 establishes the criteria for those laboratories wishing to demonstrate their technical competence, which have an effective quality system and are able to generate technically valid results, establishing a single international standard for certifying the competence of laboratories to carry tests and / or calibrations, including sampling. The case study was conducted on laboratory Pulp and Paper Universidade Estadual Paulista (UNESP), campus Itapeva, where we compared the views of the technician responsible for the laboratory and a regular user. The generated conclusion is that the laboratory is unable to initiate an accreditation process, because it fails the requirements such as quality manual, register of subcontractors, research of customer satisfaction, schedule of internal audits, schedule for completion of critical analysis, profile of the functions required, functions current description, documentation of technical requirements for accommodation and environmental conditions, calibration programs, equipment calibration program, programs calibration standards and reports and / or certificate of test and / or calibration, that are in accordance with ISO / IEC 17025:2005, beyond that there is not the possibility to develop and implement a quality system without the commitment of everyone involved, regardless of the functional hierarchy

Produção de enzimas ligninolíticas, glioxal oxidase e proteases por fungos marinhos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação da citotoxicidade, genotoxicidade e mutagenicidade de lentes de contato à base de celulose bacteriana com adição de complexos fármacos-ciclodextrinas

Nos últimos anos, a biotecnologia tem proporcionado avanços no desenvolvimento de biomateriais a serem utilizados como dispositivos médicos. Dentre esses dispositivos, podemos destacar aqueles que promovem a reparação tecidual e, também, a liberação controlada de fármacos. Partindo deste propósito, lentes de contato à base de celulose bacteriana (CB) foram desenvolvidas, visando o efeito curativo e reparativo para doenças da superfície ocular. A adição de ciclodextrinas (CDs) e fármacos, como o ciprofloxacino (CP) e o diclofenaco de sódio (DS) á essas lentes proporcionando propriedades terapêuticas e de liberação controlada dos fármacos. No entanto, para certificar-se do uso seguro desses compósitos pela indústria de dispositivos médicos, é necessário verificar se não possuem atividade citotóxica, genotóxica e/ou mutagênica. Sendo assim, a proposta do presente trabalho foi o desenvolvimento de uma adição eficaz de fármacos às lentes de contato de CB, para que sejam liberados de maneira controlada e, também, a verificação de sua biossegurança. Para essa verificação foram realizados ensaios in vitro de citotoxicidade (ensaio com o kit XTT e Sobrevivência Clonogênica), genotoxicidade (ensaio Cometa) e mutagenicidade (teste do Micronúcleo) com os respectivos. Após a análise estatística dos resultados foi possível verificar que o material CB-CP apresentou efeito citotóxico e os materiais CB-DS e CB-CD-DS apresentaram efeito citotóxico, genotóxico e mutagênico. Essa informação é fundamental para uma futura utilização segura desse biomaterial pela indústria de dispositivos médicos ...

Densidade técnica e especialização regional produtiva: as dinâmicas de produção de celulose no Vale do Paraíba Paulista

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Otimização da extração alcalina com peróxido de hidrogênio em seqüência de branqueamento com aplicação de baixo fator kappa

The new market, focused on sustainability and other environmental concerns, refers to innovations that seek alternative forms of production. In pulp and paper bleaching alternative reagents are studied, for example, hydrogen peroxide, in partial substitution of chlorine dioxide in order to reduce the formation of organochlorines. In this context, this study examined the burden of hydrogen peroxide (H2O2) on alkaline extraction stage (stage Ep) required for the bleaching of pulp with eucalyptus kraft pulp, pre-oxygen delignified to obtain equivalent brightness at 90 ± 0.5% ISO, as well as its effect on quality of pulp produced. The pulp was bleached by the sequence D(Ep)DP, with the application of factor kappa of 0.14 and varying the concentration of hydrogen peroxide in Ep stage three, five, seven and nine kilograms of reagent per ton of pulp absolutely drought. The final P stage was optimized with the use of six, nine and twelve pounds of hydrogen peroxide per ton of absolutely dry pulp to achieve the required brightness. The quality of the pulp produced was analyzed based on the kappa number, the brightness and the viscosity. The methods were performed according to standards set by the standard TAPPI (Technical Association of the Pulp and Paper Industry). The best result was obtained using the following D0Ep(7)D1P(6), which showed a viscosity of 19.9 cP, 89.6% ISO brightness, consumption of 94.9 kg / t of reagents and reagent costs of US$ 28.15, because it showed better pulp quality for a lower cost compared to the others. It was found that the greater the amount of hydrogen peroxide in alkaline extraction, the lower the kappa number and increased the amount of residual hydrogen peroxide. The higher the charge of hydrogen peroxide in Ep stage, the lower the need for hydrogen peroxide in the final P stage, reducing the cost of bleaching

Fibras naturais: características químicas e potenciais aplicações

This study has as objective determining the chemical properties that serve as the basis for potential scientific and technological applications of seven species of fibrous plants cultivated in Brazil, which are: Banana” (Musa spp.), “Coco” (Cocos nucifera), Curauá (Ananas erectifolius), Fique (Furcraea andina), Piteira” (Furcraea gigantea), Sisal(Agave sisalana) and “Taboa” (Typha domingensis). The tests for determining the percent dry completely, extractives soluble in cold water, in hot water, in sodium hydroxide 1% and in ethanol-toluene, and the percentages of ash, hydrophobicity, lignin, holocellulose and cellulose were performed at the Department of Environmental Sciences, Agronomy College (FCA) of UNESP – Botucatu, São Paulo State. It also presents a literature review about these fibers and their potential applications. Differences between the results obtained and those found by other authors are possibly explained by variations on the origin of plant material, the harvest season, the climate and soil where they were grown. However, the results and the methodology used, serve as a basis for further studies with natural fibers