Influência de calços na orientação postural de indivíduos com escoliose idiopática

INTRODUCTION: The relationship between the orientation of the segments and the adjustments that can be triggered by shoe lift and insoles in scoliotic patients during maintenance of standing position is unclear. OBJECTIVE: To verify static changes and those associated with unilateral manipulations of shoe lift in the postural orientation in people with idiopathic scoliosis. MATERIALS AND METHODS: Experimental group composed of ten patients with idiopathic scoliosis with double curve (less 10°) and control group with ten participants without scoliosis (aging from 13 to 24 years). Participants were videotaped in upright stance, standing with no, low (1 cm), and high (3 cm) shoe lift, which were placed under right and left shoe. In each condition, the participant maintain upright stance for 15 seconds and reflective markers were affixed on specific anatomical places. Postural angles were obtained: high thoracic; medium thoracic; thoracolumbar; and lumbar, as well segmental angles: shoulder; scapula; pelvis; and knee. RESULTS: In the no shoe lift condition, differences were observed between groups for high and medium thoracic angles and for shoulder. With low and high shoe lift under the right foot, difference was observed between shoe lift heights for high thoracic, for pelvis and knee angles. With low and high shoe lift under the left foot, differences between groups were observed for thoracolumbar angle and between shoe lift heights for pelvis and knee angles. CONCLUSIONS: The shoe lift promotes reorientation in the lower regions of the spine and segments of pelvis and knee. It might be suggested that in the scoliosis with double curves, manipulation in the basis of support changes the alignment of the trunk that might promote structural reorganization and the search of new adjustments among segments in individuals with idiopathic scoliosis.

30° inclination in handles of plastic boxes can reduce postural and muscular workload during handling

CONTEXTUALIZAÇÃO:O manuseio de materiais está ainda presente nos setores industriais e é associado a lesões na coluna lombar e membros superiores. A inserção de alças em caixas industriais é uma forma de reduzir os riscos relacionados à tarefa, porém a posição e a angulação das alças, que são fatores importantes para o conforto e segurança durante o manuseio, são ainda pouco investigadas objetivamente.OBJETIVOS:Comparar o manuseio de uma caixa comercial e de protótipos com alças e avaliar seus efeitos na postura de membros superiores, atividade elétrica muscular e percepção de agradabilidade em diferentes empunhaduras durante manuseio entre diferentes alturas.MÉTODO:Trinta e sete voluntários saudáveis avaliaram as alças dos protótipos que possibilitavam mudança nas posições (superior e inferior) e angulações (0°, 15° e 30º). Os movimentos dos punhos, cotovelos e ombros foram avaliados por meio da eletrogoniometria e inclinometria. A atividade elétrica muscular dos extensores do punho, bíceps braquial e porção superior do trapézio foi avaliada por um eletromiógrafo portátil. Os registros de movimento e atividade elétrica muscular foram sincronizados. Aspectos subjetivos de agradabilidade foram avaliados por meio de uma escala visual analógica.RESULTADOS E CONCLUSÕES:Os protótipos com alças inclinadas em 30° apresentaram as melhores avaliações de agradabilidade, posturas mais neutras de punho, menores níveis de atividade eletromiográfica do trapézio superior e menores ângulos de elevação dos braços. Os diferentes métodos de medida se mostraram complementares para a avaliação dos membros superiores durante as tarefas de manuseio.

Análise cinemática das articulações dos membros torácicos e pélvicos de ovinos hígidos

Pós-graduação em Medicina Veterinária - FMVZ

Relaxamento de tensão em molas T de Beta-Titânio: avaliação e uma possivel solução

Pós-graduação em Ciências Odontológicas - FOAR

Structural and optical properties of brominated plasma polymers

Novel brominated amorphous hydrogenated carbon (a-C:H:Br) films were produced by the plasma polymerization of acetylene-bromoform mixtures. The main parameter of interest was the degree of bromination, which depends on the partial pressure of bromoform in the plasma feed, expressed as a percentage of the total pressure, R-B. When bromoform is present in the feed, deposition rates of up to about 110 nm min(-1) may be obtained. The structure and composition of the films were characterized by Transmission Infrared Reflection Absorption Spectroscopy (IRRAS) and X-ray Photo-electron Spectroscopy (XPS). The latter revealed that films with atomic ratios Br:C of up to 0.58 may be produced. Surface contact angles, measured using goniometry, could be increased from similar to 63 degrees (for an unbrominated film) to similar to 90 degrees for R-B of 60 to 80%. Film surface roughness, measured using a profilometer, does not depend strongly on R-B. Optical properties the refractive index, n, absorption coefficient, alpha(E), where E is the photon energy, and the optical gap, E-g, were determined from film thicknesses and data obtained by Transmission Ultraviolet-Visible Near Infrared Spectroscopy (UVS). Control of n was possible via selection of R-B. The measured optical gap increases with increasing F-BC, the atomic ratio of Br to C in the film, and semi-empirical modeling accounts for this tendency. A typical hardness of the brominated films, determined via nano-indentation, was similar to 0.5 GPa. (C), 2013 Elsevier B.V. All rights reserved.

Wettability of chlorhexidine treated non-carious and caries-affected dentine

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Impact of Quantity of Resin, C-factor, and Geometry on Resin Composite Polymerization Shrinkage Stress in Class V Restorations

Objective: This study evaluated the effect of quantity of resin composite, C-factor, and geometry in Class V restorations on shrinkage stress after bulk fill insertion of resin using two-dimensional finite element analysis.Methods: An image of a buccolingual longitudinal plane in the middle of an upper first premolar and supporting tissues was used for modeling 10 groups: cylindrical cavity, erosion, and abfraction lesions with the same C-factor (1.57), a second cylindrical cavity and abfraction lesion with the same quantity of resin (QR) as the erosion lesion, and then all repeated with a bevel on the occlusal cavosurface angle. The 10 groups were imported into Ansys 13.0 for two-dimensional finite element analysis. The mesh was built with 30,000 triangle and square elements of 0.1 mm in length for all the models. All materials were considered isotropic, homogeneous, elastic, and linear, and the resin composite shrinkage was simulated by thermal analogy. The maximum principal (MPS) and von Mises stresses (VMS) were analyzed for comparing the behavior of the groups.Results: Different values of angles for the cavosurface margin in enamel and dentin were obtained for all groups and the higher the angle, the lower the stress concentration. When the groups with the same C-factor and QR were compared, the erosion shape cavity showed the highest MPS and VMS values, and abfraction shape, the lowest. A cavosurface bevel decreased the stress values on the occlusal margin. The geometry factor overcame the effects of C-factor and QR in some situations.Conclusion: Within the limitations of the current methodology, it is possible to conclude that the combination of all variables studied influences the stress, but the geometry is the most important factor to be considered by the operator.

Measuring the Spin of Black Holes in Binary Systems Using Gravitational Waves

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mechanical and chemical analyses across dental porcelain fused to CP titanium or Ti6Al4V

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relação entre postura, queixa dolorosa e lesão em bailarinas clássicas

Introduction: Due to the high recurrence of pain complaints and the increasing incidence of musculoskeletal injuries and postural changes in dance practice, researches related to this issue gained greater importance in scientific community. Objective: This study aimed to evaluate complaints and pain threshold, postural misalignments and the incidence of injuries in dancers noting if there is a relationship between these variables. Method: Participants were 15 ballet dancers in Marília - SP. We used photogrammetry for postural analysis, the McGill Pain Questionnaire for pain location of the volunteer, algometry pressure for measuring the threshold of pain perception and Referred Morbidity to verify and characterize the incidence of injuries this population. In the data analysis we use to percentage to quantify the data from questionnaires and Pearson correlation test angles of photogrammetry correlating with the values of the threshold of pain perception. Results: 73.33% of dancers reported to have suffered some kind of injury in the last year. The area of greatest pain complaint checked at McGill, was the region of the foot (73.30%). Conclusion: There was an agreement between regions of injury and pain, however, there wasn’t a correlation between the threshold of pain tolerance and postural angles.

Avaliação Postural em Sujeitos com Disfunção Temporomandibular Submetidos a Tratamento de Terapia Manual

Individuals with temporomandibular disorders (TMD) often have signs and symptoms such as intra-articular pain, muscle spasm, neck pain radiating from others who interfere with this balance. Over time can lead to postural changes and correction of the cervical spine, anterior head and shoulder asymmetry. The aim was to verify the effects of manual therapy on posture in subjects with TMD. Materials and methods: 30 volunteers (mean: 21.43± SD:1.43) of both sexes who had TMD classified according to axis I of the Research Diagnostic Criteria participated in this study. These were photographed in the anterior frontal and sagittal planes for analysis of the following angles (acromion clavicular joint, sternoclavicular joint, orbicular external, corners of the mouthand and protruding head). After, the volunteers were divided into groups ATM (manual therapy in the treatment of temporomandibular joint), Cervical (manual therapy in the treatment of cervical joint) and Control. The Kolmogokov-Smirnov test, followed by ANOVA, considering a significance level of 5% was used. Results: Groups ATM, Cervical and Control were considered homogeneous with respect to the values of the angles measured. These also showed no significant difference between the 1st, 5th and 10th sessions, so the manual therapy techniques applied to the TMJ and Cervical groups were not sufficient to change postural alignment. Conclusion: The postural alignment, the TMD patients evaluated in this study did not change after attending the sessions proposals with manual therapy techniques in the cervical and TMJ.

Avaiação da Dor e da Postura em Pacientes com Lombalgia Submetidos a Dois Protocolos de Fortalecimento Abdominal

Introduction: the lumbar spine is the main part of the body responsible for the support of the loads, where approximately half of body weight is in stable balance. This support relates to the action of abdominal muscles, of great importance in the balance of that region. The existence of abdominal muscle weakness, such won’t perform its function, may induce pathological postural attitude, that predispose the pain. Objective: to compare the effects of two abdominal strengthening protocols on pain and postural alignment in individuals with low back pain. Method: participated of the study 21 individuals of both genders, with ages between 19 and 25 years old (average 21,8±1,5) and average Body Mass Index (BMI) 21,9 (±2,48), divided randomly in isometric abdominal stimulation group (n=8), abdominal strengthening group (n=7) and control group (n=6). They realized eight sessions of strengthening, when responded Visual Analogue Scale (VAS) before and after each intervention. The control group (n=6) had no intervention. The postural data had been analyzed by photogrammetry. Results: Pain and posture data were analyzed using paired t test, with signifi cance index of 5%. Postural angles had no signifi cant differences (p>0,05) from all angles analyzed after the intervention to none of the groups. For pain values, a signifi cant decrease (p<0,05) was observed since the fi fth session in patients who were treated by the abdominal exercises protocol, and the fi rst session in patients who were treated by the isometric abdominal stimulation protocol. However, this decrease in pain was immediate, not lasting along the treatment sessions, in both protocols. Conclusion: the proposed protocols did not interfere in postural alignment. They were effective to decrease pain in a same session, once the isometric was the most effective, but they weren’t effective in preserving the improves over time.

Estudo da associaçao entre o Padrão face longa, o hábito de respiração bucal e as características intrabucais

Aim: to evaluate the association of the long face pattern and the mouth breathing, correlating them with the intraoral characteristics. Methods: the sample was composed of 60 Caucasian Brazilian descendents patients, divided in two groups according to the subjective of their facial pattern. The patients were clinically evaluated to determine their respiratory pattern and the diagnosed of malocclusion. The lateral teleradiographies were drawn in standard to verification facial cephalometric pattern. Chi-Square analysis evaluated the association between subjective facial pattern and type of breathing; facial pattern subjective and cephalometric facial pattern. It was also the chi-square with yates correction to evaluate the associations between subjective facial pattern, type of breathing and posterior cross bite; facial subjective standard, type of breathing and anterior open bite; facial pattern between subjective, type breathing and type of Angle´s malocclusion. Results: it showed that long face pattern (group 1) was associated with mouth breathing habit and facial cephalometric standard. Moreover, the long-face pattern (group 1) presented that mouth breathing was associated with a posterior crossbite and Angle Class II malocclusion. Conclusion: the long face pattern - evaluated with subjective facial analyses - was associated with mouth breathing. The long face pattern and patients with mouth breathing was associated with a posterior crossbite and Class II Angle's malocclusion.

A influência da ginástica laboral na flexibilidade de seus praticantes

Nowadays is more than proven by several studies in the area that flexibility is one of the first physical abilities to be impaired with advancing age. Around 40 years old, there is an acceleration in the loss of flexibility that is heavily influenced by other factors as like standard level of physical activity and health, and this could eventually lead to a difficulty in performing activities of daily basis. Active Break was created with the intention to minimize the negative impacts from the sedentary life and health of workers and encourage healthier habits in employees through stretching exercises. A lot is said about the loss of flexibility with advancing age and various ways to minimize these losses. It is necessary for us as physical educators, using techniques learned through years of learning to prove the validity of a physical activity program in improving worker health. Therefore the aim of the study was to investigate the influence of the Active Break in different flexibility joints of the participants of physical activity program offered by the NAFES laboratory and compare whether there are differences in flexibility between workers who participate in classes with those who are not. The study included 15 workers of Institute of Geosciences and Exact Sciences (IGCE) UNESP - Rio Claro. Where were two weekly gymnastics sessions lasting 15 minutes each, Within this environment were divided two groups, one who carried out the activities and the other served as control group that participated only in the evaluations. Three assessments were conducted, one before the start of a study, another 2 months later and the last one at the end of the study. On these assessments were collected measures of the angles of joints using a Fleximeter and the greatest distance achieved by the sit and reach test. The results showed no significant difference...(Complete abstract click electronic access below)

Redução de empeno em barra trefiladas do aço SAE 9254

In this paper we study the process of manufacture of wire drawn steel bars 9254, from rolled wire rod. These bars are used in the automotive industry for the manufacture of coil springs, which make up the system damping of several vehicles. The wire drawing process consists of the steps of pre-straightening, shot peening, drawing, cutting and polishing. The study aims to search for the configuration of process variables, which present the best result with respect to bending. To this were maintained settings prestraightening and mechanical stripping and varied angles and stringer polish being studied to replace the spinneret with a working angle, for a string with two working angles. To assist in the analysis of the results was the tool used DOE Software Minitab, which assesses the variation in results according to each parameter and the interaction parameters. It was thus possible to determine the best condition for wire drawing