Influência do material oclusal na distribuição de tensões em próteses implantossuportadas unitárias

Objective: the aim of this study was to evaluate the influence of occlusal veneering material in single fixed implant-supported crowns through the 3-D finite element method. Material and methods: Four models were fabricated using the Rhinoceros 4.0, SolidWorks, and InVesalius softwares. Each model represented a block of mandibular bone with an external hexagon implant of 5 mm x 10 mm and different veneering materials including NiCr (1), porcelain (2), composite resin (3), and acrylic resin (4). An axial load of 200 N and an oblique load of 100 N were applied. Results: model (2) with porcelain veneering presented a lower stress concentration for the NiCr framework, followed by the composite resin and acrylic resin. The stress distribution to the implant and bone tissue was similar for all models. Conclusions: there is no difference of stress distribution to the implant and supporting structures by varying the veneering material of a single implant-supported prosthesis.

Influência da angulação do implante e tipo de intermediário na distribuição das tensões

The aim of this study was to evaluate the influence of implant angulation and abutment type (UCLA and Estheticone) on stress distribution in screw-retained implant-supported prostheses through photoelasticity. Three models were fabricated with photoelastic resin PL-2 (Vishay, Micro-Measurements Group, Inc Raleigh, N.C., USA) containing one external hexagon implant with 3.75x10mm (Master screw, Conexão Sistemas de Prótese Ltda., Arujá, São Paulo) with 0°, 17° and 30° degrees and a screw-retained prostheses with UCLA and Estheticone abutments. The assembly was positioned in a circular polariscope; axial and oblique (45° degrees) loads of 100N were applied in fixed points on the occlusal crown surfaces by a universal testing machine. The stress generated was photographed and analyzed qualitatively with appropriate software (Adobe Photoshop®). The results demonstrated the same number of fringes for both abutment types for each angulation, with fringes increasing in the same way. A higher number of fringes were closer in the oblique loading mode. It was concluded that there was no significant difference in stress distribution in prostheses with UCLA and Estheticone abutments. Higher stress concentrations were observed with increased implant angulation. Stress concentration and intensity were higher in the oblique load than in axial load application.

Influência do material oclusal na distribuição de tensões em próteses implantossuportadas unitárias

Objective: the aim of this study was to evaluate the influence of occlusal veneering material in single fixed implant-supported crowns through the 3-D finite element method. Material and methods: Four models were fabricated using the Rhinoceros 4.0, SolidWorks, and InVesalius softwares. Each model represented a block of mandibular bone with an external hexagon implant of 5 mm x 10 mm and different veneering materials including NiCr (1), porcelain (2), composite resin (3), and acrylic resin (4). An axial load of 200 N and an oblique load of 100 N were applied. Results: model (2) with porcelain veneering presented a lower stress concentration for the NiCr framework, followed by the composite resin and acrylic resin. The stress distribution to the implant and bone tissue was similar for all models. Conclusions: there is no difference of stress distribution to the implant and supporting structures by varying the veneering material of a single implant-supported prosthesis.

Emprego de ma teriais rest auradores adesivos direto no ângulo incisal de incisivos centrais fra turados

A case report of a patient who presents as chief complaint presence of stained restorations in the anterior teeth. After analysis and discussion of the clinical therapeutic approaches to be adopted, it was observed the presence of type class IV restorations on teeth 11 and 21, due to an oblique coronal fracture in the past. But the patient was not satisfied with the aesthetic result, then where was planned the realization of the removal of the restorations, for subsequently be used direct restorative materials for the correction of form, function and esthetics. The final result showed that the restorations were able to return the form, function and aesthetic dental, thereby evidencing the proven development of restorative dentistry in the solution of aesthetic problems.

Mapeamento geológico-geotécnico pelo método de detalhamento progressivo: aplicação no planejamento e gestão de obras rodoviárias

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A articulação do quadril em uma perspectiva preditora da velocidade de marcha em idosas e como foco de intervenção de duas modalidades terapêuticas: Método Pilates e Haste Vibratória

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise de parâmetros neuromusculares e cinemáticos dos chutes Bandal Chagui e Dolhô Chagui do Taekwondo

Pós-graduação em Desenvolvimento Humano e Tecnologias - IBRC

Análise das tensões em próteses implantossuportadas esplintadas, variando o tipo de conexão protética e a inclinação do implante: estudo pelo método dos elementos finitos tridimensionais não linear

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise da distribuição de tensões em reabilitação com implantes cone morse em maxilar posterior: estudo pelo MEF 3D não linear

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Início de ativação muscular de estabilizadores primários e a capacidade física para avaliar estabilização lombo-pélvica

Introduction: Due to the high incidence of low back pain without apparent cause, different approaches to evaluate the lumbar instability has been proposed, such as surface electromyography to determine pre-activation and the ability of lumbar stabilization through functional physical assessment. In this context, the objective of this study was to evaluate the early activation of the primary stabilizing muscles in subjects without low back pain, with different physical abilities function (CFF). Method: Study participants were 20 subjects with 19.8 ± 1.4 years, 55.7 ± 8.8 kilos, 1.66 ± 0.08 m, of both sexes. The subjects underwent six Tests Physical Function (TFF) and the Test of Fast Moving Flexion Arm (TMRFB) to capture the electromyographic activity of the lumbar multifidus muscles (LM) and internal oblique - lower fibers (HI). Were assigned weights for each functional test and the result of the physical capacity of the final functional subject ranged from 0 to 100%. In the analysis of TMRB was considered the onset time of activation between the ML and HI. Results: Regarding TFF 2 (10%) subjects were considered to have normal physical capacity, 6 (30%) with good physical ability and 12 (60%) with regular physical capacity or poor. As for TMRFB average values of initiation of muscle activation in 75% of subjects were within the limits to characterize the condition of pre-muscle activation. Conclusion:The results obtained in the TFF were low compared with the CFF of asymptomatic subjects evaluated. This fact does not mean that the condition of stabilization of the subject is appropriate. However, the results obtained in the electromyographic examination to suggest that 25% of asymptomatic subjects tested did not have a proper condition of lumbar stabilization.

Onset of quadriceps and torque variation in individuals with patellofemoral pain during stair ascent

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Comparação do efeito do período de recuperação da fadiga muscular no andar entre adultos jovens e idosos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)