Umedecimento do substrato e temperatura na germinação e vigor de sementes de melão

The study was conducted to evaluate the efficacy of herbicides in desiccation Raphanus raphanistrum (wild radish) in different application times and their effects on weed seed germination. The experimental had a randomized block design with three replications. The herbicides used were: glyphosate (360; 720; and 1080 g ha(-1)), 2,4-D (335; 670; and 1005 g ha(-1)), glyphosate + 2,4-D (360 + 335; 720 + 670; and 1080 + 1005 g ha(-1)). Spraying was conducted at three different times: 1st season (full bloom) - at 62 days after emergence (DAE), 2nd season (beginning of pod formation) - at 92 DAE and 3rd season (end of pod formation) - at 108 DAE. At 14, 21, 28, 35, and 42 days after application (DAA), the desiccation was evaluated visually, and 42 DAA dry mass of shoots and seeds of the 2nd and 3rd times were collected for the test of germination. All chemical treatments tested were effective in controlling the plants of wild radish in the 1st and 2nd times, but in the 3rd time doses of 2,4-D applied singly were not effective and only the highest dose of glyphosate applied singly or in mixture provided a total plant control. In terms of percentage, the reduction in dry matter of plants was higher with the application of larger doses of chemical treatments. The herbicides affected the germination of seeds of wild radish, and the herbicide 2,4-D provided greater reduction in germination in the 2nd and 3rd seasons.

O clima urbano de Assis/SP: estudo comparativo da temperatura e umidade relativa entre a cidade e o campo

It is known that the urban environment modifies the energy balance between the surface and the atmosphere, causing changes in temperature, relative humidity, among other things, opening the way for studies aimed at urban climatology. Based on the theme of urban climate, this research focuses on the city of Assis, located west of São Paulo. The generation of urban climate is a result of various factors, among which stand out: the use and different land use, the thermodynamic properties of buildings, number of buildings in the urban, socioeconomic activities, etc.. In general, this increases the temperature and reducing relative humidity, providing thermal discomfort. The rural environment is used for comparison studies to this theme by presenting different characteristics in relation to the structure, morphology and urban functionality. The main objective of this study is to determine the characteristics of temperature and humidity environments with the habits and occupations of the different soils in winter, at night, one inserted into the urban fabric of Assis and the other in the rural environment, to verify for evidence of changes in climatic elements because of urbanization. To collect the data will be used mini automatic weather stations that record data on temperature and humidity. For analysis of the results will be made between the data obtained in the city and the countryside, developing graphics application using Excel to tabulate the data. It was found that there were differences in the thermo-hygrometric data collection points, showing a specific urban climate in the city of Assis

Avaliação do comportamento da temperatura na massa deresíduos com diferentes tempos de disposição no aterro sanitário de Rio Claro - SP

The present work investigates solid waste temperature behavior in different depths in two cells in the Rio Claro-SP city’s sanitary landfill. One of the cells is in operation with waste disposal beginning about one year ago. The other one is located in an closed area and contain waste disposed from five to seven years before. Measures were also made in an area that have no disposed waste in order to collect reference values. The data were obtained every fifteen days. The temperature results shows higher values in the operating cell, with maximum 38,1 °C in a depth of 4,0 m. In the closed cell the highest values were 36,3 °C in a depth of 8,5 m. The highest temperature values were obtained in the operating cell due to wider substract availability that indicates a more intense biological degradation activity. With three meters depth, the temperature results were 36,6 °C in the operating cell, 33,8 °C in the closed cell and 24,5 °C in the reference area. Therefore the temperature can be used as a biological activity indicator in sanitary landfills, supporting biogas studies

Calor e temperatura: uma revisão dos conceitos nas diferentes abordagens físicas

This work research and analyses the formulations and concepts of heat and temperature presented in Physics textbooks. These issues are deemed important because students often have difficulties differentiating and understanding such concepts, which compromises their education. The goal is to show that well-established relationships between Physical quantities such as energy, pressure, heat and temperature, even in different theories of Classical and Quantum Physics are not enough to define either temperature or heat. It also presents simple experiments that complement the teaching and learning of these concepts

Estudo de temperatura de plasma de álcool através de espectroscopia de emissão natural radical C2*

Non-intrusive methods of diagnosis, such as spectral analysis of the radiation emitted by the system, have been used as a viable alternative for determining the temperature of combustion systems. Among them, the determination of temperature by natural emission spectroscopy has the advantage of requiring relatively simple experimental devices. Once Chemiluminescent species are formed directly in the excited state, the collection and recording of radiation emission spectrum is enough to determine the temperature (CARINHANA, 2008). In this study we used the process of making direct comparisons between the experimental spectra obtained in the laboratory from the plasma of alcohol, and the theoretical spectra plotted from a computer program developed at the IEAv. The objective was to establish a fast and reliable method to measure the rotational temperature of the radical C2*. The results showed that the temperature of the plasma, which in turn can be taken as the rotational temperature of the system, is proportional to the pressure. The temperature values ranged from ca. 2300 ~ 2500 K at a pressure of 19 mmHg to 3100 ~ 3500 K for the pressure of 46 mmHg. The temperature values are somewhat smaller when we consider the theoretical spectrum as a Lorentzian curve. The overlap of the spectra was better when using the profile curve, but still were not exactly superimposed. The solution to improve the overlap of the theoretical with the experimental spectra is the use of a curve that has the convolution of two profiles analyzed: Lorentzian and Gaussian. This curve is called the Voigt profile, which will also be implemented by programmers and studied in a next work

Determinação de temperatura de chamas por espectroscopia de espécies quimioluminescentes

In a combustion process involving fossil fuels, there is the formation of species Chemiluminescent, especially CH*, C2* and OH*, whose spontaneous emission can be used as a diagnostic tool. In the present work, mapping and determination of the rotational temperature of the species CH* produced in flames on a burner fueled by Liquefied Petroleum Gas (LPG) was carried out. This study is part of a project involving the characterization of supersonic combustion in scramjets engines, whose study has been conducted in the hypersonic shock tunnel IEAv laboratories. The technique used was the natural emission spectroscopy, which has as main advantage of being non-intrusive. The rotational temperature determination was made using the Boltzmann method, whose principle is to relate the emission intensity of the species to the temperature by means of spectroscopic constants established.The temperature values were determined from the analysis of electronic bands AX and BX of the radical CH*. In order to confirm the results of flame temperatures obtained by the natural emission technique, was also used the technique of line reversal sodium. The results of both techniques showed that the temperature of the flames investigated is about 2500K a 2700K

Avaliação de juntas soldadas em tubos de aço carbono submetidos a altas temperatura e pressões

The welding process in industrial piping is still the most effective way to ensure the durability and quality of the wide range of industrial process, although because of the high demand for energy and quality of the produced products, the piping has been constantly tested for high pressure applications and still high temperature. The welding method analyzed is the TIG (Tungsten Inert Gas) welding or GTAW (Gas-Shielded Tungsten Arc Welding), which ones have as principal feature the utilization of a not consumable tungsten electrode in the torch extremity , in this process is necessary a protective atmosphere of inert gas. The welding TIG advantage is the obtaining of a welded seam clean and with quality for not has slag after the welding. This work has as objective show the variability in the carbon steel piping welding parameters and by the tests in four proof bodies will be shown the influence of the variation of the welding methods in a welded seam. The tests will vary since the piece to be welded preparation, till penetrating liquid tests, welding macrography, welding x-ray and traction tests. Even been a clean and with quality welding is necessary a final inspection in the seam welded looking for defects almost inevitable resulted of the welded process, the obtained results have the objective of indicate and minimize the defects to ensure quality and durability of the welded seam

Obtenção e caracterização de compósitos via RTM com alta fração de fibras de carbono processados à temperatura ambiente

After confirming the high specific mechanical properties of composite materials by scientific studies conducted over the last decades, one of the challenges of this new class of materials is the ability to achieve mass production at a more affordable cost, which has become indispensable. The Resin Transfer Molding (RTM) is an excellent method for manufacturing composite materials. Despite being a process widely used by international companies in the production of high performance structural composites, only a short time the national aviation industry has shown interest in implementing this type of processing to more complex structures and greater structural responsibility. In aeronautical projects, the reproducibility and the relative low cost of this process, several studies have been performed in Brazil for learning and perfecting this technique. This process is suitable for producing polymer components both simple as complex geometry, and allows to achieve consistent thickness, with high quality finish and without limiting range. Polymeric composite components for the high mechanical stress applications such as aircraft structures, satellites, etc., require a strict control of volume fractions of the composite constituents, beyond the knowledge of their mechanical and thermal properties. Therefore, in this experimental work degree study on the mechanical, thermal and of porosity composites processed by RTM processed characterization was performed. This characterization was performed targeting a possible aerospace application of this composite material. For the production of composites, process equipment (RTM RTM injector Radius 2100cc) was used. The processed carbono/epoxy composites were characterized via flexure tests mechanically and thermally analysis via DMA, DSC and TGA. To determine the volume fraction of fibers, the composite samples were analyzed via matrix digestion (ASTM D3171) ... (Complete abstract click electronic access below)

Avaliação do efeito da temperatura na deslignificação com o oxigênio nas propriedades do papel

The deslignification with oxygen, also denominated pre-O2, consists in a whitening stage, which consists of accomplishing an oxidation of the lignin, and remove it with the alkali, providing a larger earnings in the bleaching of the pulp. The pre-O2 is a process already very established, where a significant part of the cellulose of whitened short fiber produced nowadays suffers deslignification for this method. The conditions of work of this stage contemplate directly in the results of the deslignification level, in the physical, optical and mechanics properties of the pulp, and consequently of the paper, because this is important to know their effects fully. The main variables related to the control of this process are respectively: pressure and oxygen load, alkaline load, consistence, time and temperature, being this last variable was the study focus in this work. The objective of the work was to analyze the effect of the variation of the temperature in the oxygen whitening along every bleaching process of the pulp, refine and in the optical, physics and mechanics properties of the paper. The development of the work was based in four temperature levels (90, 95, 100 and 105°C) combined to two whitening sequences (OD0(E+P)D1P and OAHTD0(E+P)D1P). The results obtained in the oxygen deslignification stage indicated that the elevation of the temperature contemplated in increases of the whiteness, deslignification efficiency and in the viscosity loss allied to the reduction of the selectivity of the process. In the remaining of the whitening, the sequence that included the acid hydrolysis presented values slightly inferior of whiteness, kappa number, viscosity and yield in relation to the other sequence when compared with the samples of same temperatures. Already the physical tests showed that the sequence with acid stage amplifies the values of capillary... (Complete abstract click electronic access below)

Análise do desempenho físico-mecânico de painéis compensados de Pinus sp. produzidos com adesivos aquosos a base de poliacetato de vinila e de homopolímero vinílico

This study aimed to evaluate the physico-mechanical performance of three PVA adhesive formulations according to the Brazilian standards for plywood testing and to evaluate the results with those presented in the technical literature and specified in normative documents. The study presents the production process of the panels, the obtaining of samples and, finally, the implementation of physico-mechanical characterization tests based on plywood Brazilian standards. For the panels production it was used a gramature of 120 g / m² and applied a pressure of 15 bars and two temperature combinations and pressing time for each adhesive. The commercial adhesives used were PVA 1810, PVA 1060 and Vinyltec 239. The physical tests conducted were thickness swelling, density, moisture content and water absorption. The mechanical tests were static flexion, for the determination of elasticity modulus (MOE) and rupture modulus (MOR), and shear in the glue line. Among the three formulations studied none showed good performance in the presence of water. However, other trials in the adhesive showed better results and closer to the commercially equivalent used, in the case the urea-formaldehyde, was the PVA 1810, that can be applied in non-structural uses and in environments without the presence of moisture

O local de nidificação do sabiá-barranco (Turdus Leucomelas) (Aves, Turdidae) afeta a temperatura interna do ninho durante a incubação e cuidado à prole?

Individuals of the species Turdus leucomelas are adapted to live in environments already modified by humans, thus obtaining reproductive success in their nesting in vegetation, as well as built their nests in human buildings. Nests found in buildings are often less camouflaged, making them more exposed to predators compared to nests built in vegetation; however the nests built buildings are common, indicating a possible advantage associated with these nests. By means of this idea if was assumed that a possible advantage to this construction in buildings is linked to a change in variation in the internal temperature of the nest during incubation and development of pups until they leave their nests. Accordingly, with the aid of iButtons and TidBits (temperature data loggers), the present study aimed to analyze the influence of the nesting site on how the temperature is kept, and how it changes in the microenvironment in which the nest is inserted, indicating potential benefits associated with that choice. In the samples found with the vegetation, temperature data showed a pattern of temperature of the microenvironment of the nests is not very stable, varying with ambient temperature, whereas in the samples found with the human constructions, the temperature data showed a pattern of temperature microenvironment nests more stable for a long time. When comparing the two environments which they settled nests, as well as the different times of day (daytime and nighttime), how the temperature was kept and pattern of change within the nest was significantly different (F=43.85, p<0.001), with higher and more constant internal temperatures in nests installed in construction, compared to vegetation. When observing periods of the day, it was found that in both environments the temperature inside the nest reached higher values and higher than the environment at night, coinciding with the rest of the female at night. Data may suggest changes in the...

Determinação da temperatura para inativação da urease em amostras de casca e farelo de soja

s not degraded in the rumen but destroy ureasis. Soybean meal is one of the protein ingredients commonly used in formulations of animal feeds. In the diets of monogastric bran has high protein content provided by a greater separation of soybean hulls. For the ruminant protein value of the meal is lower with the inclusion of soybean hulls to reduce the level of protein. With the increased consumption of meal high protein, due to increases in production of pigs and poultry in recent years, increasing the availability of soybean hulls on the market, this is because soybean hulls is little understood in the feeding of monogastric . In this context, the main objective of this study was to determine the times and temperatures needed to ensure the effective inactivation of ureasis present in the bran and soybean hulls. According to the assessments, to make the determination of temperatures and times required for the inactivation of ureasis present in the bran and soybean hulls are 170 º C and 25 minutes for soybean meal and 140 ° C 10 minutes for soybean hulls, respectively

Análise da supressão do fenótipo de sensibilidade a temperatura do mutante tif51A Q22H/L93F em Saccharomyces cerevisiae

O fator de início da tradução de eucariotos eIF5A é uma proteína essencial para a viabilidade celular, altamente conservada em arqueas e em eucariotos e apresenta uma modificação pós-traducional única em que um resíduo específico de lisina é modificado para o aminoácido hipusina. O processo de hipusinação é essencial para a função de eIF5A e consequentemente para a viabilidade celular. eIF5A foi descrita inicialmente como um fator de início da tradução, pois estimula a síntese de metionil-puromicina in vitro, porém, dados recentes de nosso e de outros grupos mostraram um papel para eIF5A na etapa de elongação da tradução. eIF5A é um homólogo estrutural do fator de elongação da tradução P (EF-P) de bactérias. EF-P também estimula a síntese de metionil-puromicina, sendo essencial para viabilidade celular em bactérias, além disso EF-P também apresenta uma modificação pós-traducional semelhante à hipusinação. Recentemente, em nosso laboratório, foi isolado o RNA transportador de alanina (tRNAAla) como supressor do fenótipo de sensibilidade a temperatura do mutante tif51AQ22H/L93F de eIF5A, sugerindo uma possível correlação funcional entre estes fatores. Tendo em vista a homologia estrutural entre eIF5A e EF-P e a possível homologia funcional entre estes fatores, pretende-se entender a relação de eIF5A com o tRNA de alanina e com isso contribuir para a caracterização do papel específico desta proteína na elongação da tradução. Portanto, foram clonados diferentes genes que codificam para diversos tRNA´s (glicina, leucina, prolina, metionina e fenilalanina) para averiguar se a supressão observada para o tRNA de alanina também pode ser vista com estes outros tRNA’s ou se é específica. Considerando-se que eIF5A foi descrita a mais de trinta anos sem que sua função específica fosse caracterizada, este estudo pode contribuir... (Resumo completo, clicar acesso eletrônico abaixo)

Análise da supressão do fenótipo de sensibilidade à temperatura do mutante tif51AK56A em Saccharomyces cerevisiae

O fator de início da tradução de eucariotos 5A (eIF5A) é uma proteína essencial para a viabilidade celular, altamente conservada em arqueas e eucariotos e apresenta uma modificação pós-traducional única em que um resíduo específico de lisina é modificado para o aminoácido hipusina. O processo de hipusinação é essencial para a função de eIF5A e consequentemente para viabilidade celular. eIF5A foi descrita inicialmente como um fator de início da tradução pois estimula a síntese de metionil-puromicina in vitro, porém, dados de nosso e de outro laboratório mostraram um papel para eIF5A na etapa de elongação da tradução. eIF5A é um homólogo estrutural do fator de elongação da tradução P (EF-P) de bactérias. EF-P também estimula a síntese de metionil-puromicina, sendo essencial para viabilidade celular em algumas espécies de bactérias. Dados recentes mostram que EF-P, bem como eIF5A participam na etapa de elongação da tradução facilitando a tradução de sequências de parada, “stalling motifs”. Foi isolado, em nosso laboratório, o gene que codifica para o tRNA de alanina como supressor do fenótipo de sensibilidade a temperatura do mutante tif51AK56A, sugerindo uma possível correlação funcional entre estes genes. Para compreender o mecanismo de supressão e estudar a relação com outros tRNAs este estudo foi proposto e realizado.

Comportamento da temperatura da massa de resíduos aterrados em um aterro sanitário

In this paper we investigate the temperature variation of the mass of waste along the depth in a household waste landfill of Rio Claro - SP, São Paulo, having a climate characterized as Tropical Altitude. In this research, there were two holes in two distinct points of the landfill, with different depths and characteristics in order to fix several thermal sensors - RTDs - to record the temperature at predetermined depths. Overall, the results show the influence of temperature at depths of up to 3.0 meters (from the surface) and that it varies in a manner to stabilize at depths above 5.0 meters. The highest temperature obtained was approximately 37.5 ° C for a time of waste disposal of 7 to 10 years. The results showed the presence of organic matter (substrate) which resulted in elevated temperature resulting from biological activity