Correlação entre produção de feijão e atributos físicos de um Latossolo em Mato Grosso do Sul

In Brazil, common bean is in one of the most representative economic crops, not only because of its growing area but also because of the economic value of its production. In the crop year 2006/07, in Selvíria (MS), we analyzed the common bean yield as a function of some physical attributes of a Typic Acrustox in minimum tillage and center pivot irrigation system. The aim of this work was to evaluate among the soil physical attributes, under minimum tillage, those that better explain the variability of bean yield using the Pearson and spatial correlations,. A geostatistical grid was installed to collect data from soil and plants, with 117 sampling points in an area of 2025 m² and homogeneous slope of 0.055 m m-1. The results showed a low yield of bean, which occurred probably due to a lower density of plants that the system provided. Thus, for the minimum tillage system, the bean yield could be explained as a function of total porosity and bulk density.

Physical quality of an Oxisol under an integrated crop-livestock-forest system in the Brazilian Cerrado

Soil physical quality is an important factor for the sustainability of agricultural systems. Thus, the aim of this study was to evaluate soil physical properties and soil organic carbon in a Typic Acrudox under an integrated crop-livestock-forest system. The experiment was carried out in Mato Grosso do Sul, Brazil. Treatments consisted of seven systems: integrated crop-livestock-forest, with 357 trees ha-1 and pasture height of 30 cm (CLF357-30); integrated crop-livestock-forest with 357 trees ha-1 and pasture height of 45 cm (CLF357-45); integrated crop-livestock-forest with 227 trees ha-1 and pasture height of 30 cm (CLF227-30); integrated crop-livestock-forest with 227 trees ha-1 and pasture height of 45 cm (CLF227-45); integrated crop-livestock with pasture height of 30 cm (CL30); integrated crop-livestock with pasture height of 45 cm (CL45) and native vegetation (NV). Soil properties were evaluated for the depths of 0-10 and 10-20 cm. All grazing treatments increased bulk density (r b) and penetration resistance (PR), and decreased total porosity (¦t) and macroporosity (¦ma), compared to NV. The values of r b (1.18-1.47 Mg m-3), ¦ma (0.14-0.17 m³ m-3) and PR (0.62-0.81 MPa) at the 0-10 cm depth were not restrictive to plant growth. The change in land use from NV to CL or CLF decreased soil organic carbon (SOC) and the soil organic carbon pool (SOCpool). All grazing treatments had a similar SOCpool at the 0-10 cm depth and were lower than that for NV (17.58 Mg ha-1).

Geoestatística na avaliação dos atributos físicos em latossolo sob floresta nativa e pastagem na Região de Manicoré, Amazonas

The use of geostatistical techniques allows detection of the existence of dependence and the spatial distribution of soil properties, thus constituting an important tool in the analysis and detailed description of the behavior of soil physical properties. The aim of the present study was to use geostatistics in assessment of physical properties in a Latossolo (Oxisol) dystrophic under native forest and pasture in the Amazon region of Manicore. Grids with of 70 x 70 m were established in native forest and pasture, and points were marked in these grids spaced at every 10 m, for a total of 64 points. These points were then georeferenced and in each one, soil samples (128) were collected at the depths of 0.00-0.20 and 0.40-0.60 m for a survey of their physical properties. These grids are parallel at a distance of 100 m from one another. The following determinations were made: texture, bulk density and particle density, macroporosity, microporosity, total porosity and aggregate stability in water. After tabulating the data, descriptive statistical analysis and geostatistical analysis were performed. The pasture had a slight variation in its physical properties in relation to native forest, with a high coefficient of variation and weak spatial dependence. The scaled semivariograms were able to satisfactorily reproduce the spatial behavior of the properties in the same pattern as the individual semivariograms, and the use of the parameter range of the semivariogram was efficient for determining the optimal sampling density for the environments under study. The geostatistical results indicate that the removal of native forest for establishing pasture altered the natural variability of the physical properties.

Propriedades físicas de um Nitossolo Vermelho em função dos sistemas de uso e manejo

O solo, um dos principais suportes da produção agrícola tem seu comportamento regido por um complexo conjunto de fatores físicos, químicos e biológicos, razão pela qual o presente trabalho teve como objetivo avaliar as modificações dos atributos físicos de um Nitossolo Vermelho distroférrico com diferentes manejos, na Faculdade de Ciências Agronômicas - UNESP, Campus de Botucatu, São Paulo, Brasil. O delineamento estatístico foi inteiramente casualizado, com seis repetições em três diferentes áreas, sendo uma área de mata nativa, uma área com sistema de preparo convencional do solo e uma área com plantio direto. Foram determinados: matéria orgânica, argila natural, porosidade total, macroporosidade, densidade do solo, resistência à penetração e diâmetro médio ponderado dos agregados. O sistema de preparo convencional apresentou os menores teores de matéria orgânica na camada até 0,20 m. Na resistência à penetração não houve diferença entre os tratamentos. Para as cinco profundidades do sistema de preparo convencional observaram-se maior densidade e teor de argila natural em comparação aos outros sistemas. O sistema de preparo convencional diferiu dos demais tratamentos quanto ao diâmetro médio ponderado, porosidade total e macroporosidade apresentando os menores valores desses atributos.

Effects of traffic control on the soil physical quality and the cultivation of sugarcane

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Usos do solo na reforma do canavial: atributos físicos de latossolos, produtividade e qualidade da cana-de-açúcar no 3° corte

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Caracterização do sistema petrolífero das águas rasas na Bacia do Espírito Santos com a aplicação de técnicas geofísicas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Determinação de Cd, Pb e Cu em particulados atmosféricos da região de Presidente Prudente por análise voltamétrica utilizando eletrodo de mercúrio

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Propriedades físicas e mecânicas de um cimento de ionômero de vidro após a incorporação de nanopartículas de dióxido de titânio

Pós-graduação em Ciências Odontológicas - FOAR

Processamento, caracterização microestrutural e propriedades elásticas de metais celulares do sistema Ti-6Al-4V para fins de regeneração óssea

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Obtenção e caracterização de filmes finos de Bi3NbO7 pelo método dos precursores poliméricos

Pós-graduação em Engenharia Mecânica - FEG

Atributos da solução e do solo de cerrado após aplicação de resíduo da extração de celulose

Pós-graduação em Agronomia - FEIS

Comportamento da cana-de-açúcar em duas safras e atributos físicos do solo, sob diferentes tipos de preparo

The tillage comprises on average 25% of the cost of deploying a reed, so this cost reduction measures are desirable since they do not compromise the quality of the operation and longevity of sugarcane. The objective was to evaluate the effect of different tillage systems in Acrustox, correlating soil physical properties and characteristics of sugarcane agroindustrial plant cane and ratoon cane. We used five types of soil tillage, over experimental design in blocks with five replications. The particle size was measured every 0.1 m to 0.4 m depth, through deformed soil samples collected at the end of the first growth cycle of the culture. For other soil physical properties: bulk density, total porosity and water content, assessments were performed at the end of each cycle, collecting soil samples in layers of 0-0.20 to 0.21-0.40 m, in addition to performing the penetration resistance, using a penetrometer impact. The response of sugarcane depending on the types of tillage was determined from the evaluation of productivity per hectare of stem (TCH), sugar (TPH), the values of pol % cane (AP), sugar total recoverable (ATR) and fiber samples collected at harvest stalk of sugarcane plant and ratoon cane. In the tillage studied, there was a change of the physical attributes of the soil, causing reduced productivity in 2009/2010 crop, compared with the 2008/2009 season. In tillage system of furrowing direct lowest result was observed for TCH, especially in 2009/2010 crop, when the difference with conventional tillage was 20.53 Mg ha(-1).

Avaliação dos ciclos de polimerização da resina acrílica para base de prótese total

In the present work it was studied the behavior of four water bath curing cycles of heat activated acrylic resin considered as long duration (I – 65ºC for 30 min;50ºC for 23h and 30min; and 100º C for 1h; II- 50ºC for 24h and the rapid cycle), compared to the known long time curing cycle (9 hours for 72ºC) and short curing cycle (1 h for 65ºC; 30 min to elevate at 100º C and 1:00 to 100º C). Analysis consisted of observations and verification of the residual monomer, weight alterations, dimensional, dimensional lineal, porosity and hardness to determine material performance. The results pointed out that residual monomer presented statistical significant differences in the factor storage and interaction among the factors cycle X storage for weight alteration; statistical significant differences for the factor storage for lineal dimensional alterations, without significant differences for hardness. Porosity was verified in minimum degree in the cycle III and in appreciable amount in the cycle IV

Zonas homogêneas de atributos do solo para o manejo de irrigação em pomar de videira

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)