Avaliação do desempenho das máquinas agrícolas na implantação da cultura do girassol

The sunflower oleaginous is the fourth of recognized importance in the oil production and few studies related to agricultural operations adopted for this crop. The objective of the present work was to study the performance of agricultural machines in the conventional tillage and reduced in the plantation of the sunflower crop. The experiment was installed at the Experimental Farm of Lageado, belonging to the Faculty of Agricultural Sciences of UNESP, located in Botucatu-SP. It consisted of two types of tillage (conventional tillage-CC and reduced tillage-CR), with experimental design in randomized blocks and four replications. The treatment CC promoted less coverage of the soil surface protected with waste when compared to CR treatment. The chisel plow was the tillage of equipment that required the tractor higher average traction force, average power traction and slippage, consequently, promoted lower average speed of work. The theoretical field capacity and area of land involved in the treatment CR were superior when compared to treatment CC, thereby lower consumption of fuel per hour worked was lower in CR treatment.

Demanda energética de máquinas agrícolas na implantação da cultura do sorgo forrageiro

Forage sorghum can be grown in areas and environmental conditions dry and warm, where the productivity of other forage plants can often be uneconomical. The soil disturbance can be made only on the lines of planting (direct seeding) or entirely from the area for seeding (conventional tillage), as plowing, harrowing, subsoiling and chiseling (minimum tillage). The displacement speed ideal for planting is one in which the groove is opened and closed without removing the over-ground, allowing the distribution of seed spacing and depth constant. The experiment was conducted in a soil classified as Typic Oxisol at Lageado Experimental Farm, Faculty of Agronomic Sciences, UNESP, Botucatu campus. This study aimed to evaluate the response of sorghum in four forward speeds (3, 5, 6 and 9 km h-1) and four systems of soil management: SD (direct seeding), GP (harrow + sowing), LPG (disc harrow and two light disking + sowing) and CR (scarification and seeding). Data was subjected to analysis of variance in a factorial 4 x 4 and a randomized block design with split plots. The following parameters were determined: average speed, average strength of the drawbar, the average power drawbar, theoretical field capacity of the tractor-equipment, fuel consumption per hour. For the conditions under which the experiment was conducted, it was concluded that the hourly fuel consumption was not influenced by tillage systems and was inversely proportional to the increase of speed work, and that the change of speed in the sowing operation did not provide additional the values of average traction force on the bar of the tractor-planter.

Determinação do rendimento na barra de tração de tratores agrícolas com tração dianteira auxiliar (4X2 TDA)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Construção e validação de um túnel de vento para ensaios de estimativa da deriva em pulverizações agrícolas

The aim of this study was to build and validate a low cost reduced-scale wind tunnel for drift evaluation on pesticide application technology. The work was carried out at the NEMPA - Núcleo de Ensaio de Máquinas e Pneus Agroflorestais (NEMPA), FCA/UNESP, Departamento de Engenharia Rural, Botucatu/SP, Brazil. The wind tunnel main characteristics were an open circuit and a closed working section with a fan blowing air into the tunnel. Screens were fitted downstream after the fan in order to stabilize the air flow on the working section. The tunnel was built with 3.0 mm eucalyptus hardboard, with a total length of 4.8 m and a squared section of 0.56 m. The air flow was provided by a 180 W axial fan. The system was adjusted and calibrated to provide a laminar and stable flow at 2.0 m s-1. Validation studies were carried out by using a Teejet XR 8003 flat fan nozzle at 200 kPa (medium droplets) to apply a spray solutions containing water plus a food dye (Blue FDC) at 0,6% m v-1 mixed with two adjuvants: a polymer based anti drift formulation at 0,06% m v-1 and a sodium lauryl ether sulfate based surfactant at 0,2% v v-1. After a 10-second application the drift was collected on nylon strips transversally fixed along the tunnel at different distances from the nozzle and different high from the bottom part of the tunnel. Drift deposits were evaluated by spectrophotometry. The wind tunnel had low levels of turbulence and high repeatability of the data, which means that the flow was uniform and able to be used for carrying out measures to estimate drift. The validation results showed that the tunnel was effective to enable comparative drift measurements on the spray solution used in this work making possible the evaluation of drift risk potential under those spray technologies. The use of an adjuvant based on a polymer reduced the amount of drift from the nozzle compared to the surfactant.

Caracterização física e química e potencial de deriva de caldas contendo surfatantes em pulverizações agrícolas

The aim of this work was to evaluate the effect of the addition of different surfactants in physical and chemical properties of spray solutions, droplets spectra and drift potential on agricultural spraying. The surfactants and concentrations (v v-1) were: Haiten (0.1%), Antideriva and Intec (0.05% and 0.1%). The following characteristics were analyzed: surface tension, viscosity, density and electric conductivity. The droplet size spectrum was determined by a laser particle analyzer (Mastersizer S®, version 2.15) including measurements of volume medium diameter (VMD), the percent of droplets below 50 and 100 μm (V50 e V100) and index span. In order to estimate the drift potential, a series of wind tunnel tests were performed with a Teejet XR 8003 flat fan nozzle at 200 kPa (medium droplets) used to apply the spray solutions containing water, the adjuvants and a food color dye (Brilliant blue FD & C no 1) at 0,6% m v-1. The drift was collected on nylon strips transversally fixed along the tunnel at different distances from the nozzle and different high from the bottom part of the tunnel. Drift deposits were evaluated by spectrophotometry. The results showed that the addition of adjuvants changed physical and chemical properties of spray solutions in different magnitudes according to the surfactant. Surfactants changed the droplet spectrum and drift potential, indicating that higher VMD and smaller V100 induced higher percentage of drift.

Geotecnologia aplicada no estudo e planejamento de ocupação e uso do solo em uma bacia hidrográfica para fins agrícolas e conservacionistas

The study aimed to obtain the land use of the watershed Ribeirão Santo Antonio - São Manuel (SP), through the thematic map of the satellite image. The cartographic databases were planialtimetric letter in digital format used in georeferencing and the satellite image. Geographic Information Systems (GIS) -IDRISI Andes 15.0 was use to perform the image georeferencing and to do the thematic map obtained from the visual interpretation the satellite image. The map of land use showed that the culture of sugar cane occupies most of the area (81.00%), when analyzing the satellite image. This result show us the predominance of agricultural occupation in the region. The thematic map obtained by the classification screen, using GIS, allowed the mapping of land use, generating data that will assist in future planning area recovery. The results of the study showed the efficiency, speed and reliability of the tools used, these being very useful for future projects.

Polinização controlada em eucaliptos nas empresas florestais brasileiras

Controlled pollination is an important tool in a forest genetic improvement program, which permits to choose parents and make specific crosses maximizing gains and providing superior genotypes in less time than conventional pollination. To verify the needs of the forest companies regarding the conduction of controlled pollination orchards in the breeding program, a specific questionnaire was sent in September 2011 to companies associated to IPEF. The objective of the questionnaire was to collect basic information about the current situation of controlled pollination orchards and check the main difficulties and demands related. It was found that use of the controlled pollination orchard has begun to be used by companies in the Brazilian forest sector just a few years ago and is considered to be very important in breeding programs in order to shorten the time to obtain new genotypes; but there is still need of crucial information regarding the management of these orchards. The main demands are: Basic concepts of flowering induction; homogeneity of flowering; hormonal induction and alternative techniques for flowering; relationship between management and genotypes used; variations in the flowering of different genotypes; management of the orchard in the different phenological phases; process of grafting typesand interaction between graft and rootstock, irrigation systems; species identification and flowering map.

Relação entre risco de erosão e distância de camalhões em estradas florestais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Cartas de controle para gerenciamento de operações agrícolas mecanizadas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Um predador generalista na fronteira entre ecossistemas: interações tróficas e os processos ecossitêmicos bromelícolas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Multifuncionalidade da paisagem em assentamentos rurais nos entornos de usina canavieira e do Parque Estadual Morro do Diabo (SP)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Regeneração natural sob talhões puros de espécies nativas com diferentes atributos funcionais

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avifauna em matas ciliares: caracterização visando ações de emergência, mitigação e compensação em caso de derramamento de combustíveis em vias hidroviárias

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Diversidade de abelhas nativas em gradientes de cobertura e heterogeneidade da paisagem

Cerca de 90% das plantas com flores e 35% das culturas agrícolas são dependentes de animais para polinização, e as abelhas são os principais agentes polinizadores de uma ampla variedade de espécies de plantas de ambientes naturais e agrícolas. Assim, as abelhas não só são imprescindíveis para a manutenção e conservação de comunidades de plantas em sistemas naturais, como também na atuação direta e significativa na produtividade agrícola. Atualmente, as populações de abelhas estão em declínio no mundo todo, em decorrência, principalmente, do crescente desmatamento e consequente perda de habitas adequados, além de outras ações antrópicas que modificam os seus nichos. Tendo em vista que muitos estudos, realizados principalmente em regiões temperadas, têm demonstrado que a paisagem do entorno dos cultivos agrícolas influencia a diversidade e abundância de polinizadores, avaliações sobre o efeito do contexto da paisagem na fauna de abelhas se tornam fundamentais. Este estudo teve como objetivo geral identificar os fatores que influenciam a riqueza e a abundância/diversidade de abelhas nativas em áreas agrícolas inseridas em um gradiente de quantidade de habitat e níveis de heterogeneidade da paisagem. O estudo foi conduzido no município de Guapiara, SP, região predominantemente agrícola, com fragmentos florestais de Mata Atlântica no entorno das propriedades rurais. Para amostrar a distribuição e a diversidade das abelhas foram usadas armadilhas do tipo pan trap (nas cores amarelo, azul e branco). Em cada ponto amostral foram instaladas cinco estações (cada estação composta por um pan traps de cada cor) de 1,5m de altura, cuja distribuição espacial dentro das propriedades de estudo tem formato de X e distantes uma das outras 5m. As amostragens foram de 30h/coleta em cada ponto amostral (n=17, cada um com raio de 1000m), realizadas em uma única época do ano (primavera/verão, quente e chuvoso)...