Caracterização geofísica no Gabro Santa Catarina, São Sepé (RS)

Geophysical methods are widely used in mineral exploration for several types of mineral deposits. When combined with direct studies as geochemistry, a substantial increase in the probability of ore discovery is possible in mineral exploration activities. Electrical geophysical methods are particularly promising in studies related to the search of sulphides due to the contrast of physical properties electric resistivity and chargeability. This paper presents the results obtained from the application of Resistivity (DC) and Induced Polarization methods, through the electrical profiling technique, aiming at evaluating the potential mineral of a gabbro intruded in a metasedimentary sequence, in an area where several occurrences of gold and copper were described. This gabbro is ranked on the Basic-Ultrabasic stratiform bodies, which gather peridotites, gabbros, and layered anortosites. Three radial lines of electrical profiling were performed, spaced of 60° and crossing at the area center, with readings of electric resistivity and chargeability in Wenner-Schlumberger array. The association of low resistivity and high chargeability areas has allowed defining potentially mineralized zones related to structures that condition the drainage net in the gabbro domain. Grains of gold detected through geochemical prospection of alluvial sediments dowstream from the gabbro may have originated from leaching of ores deposited in fractures through the action of river waters within the gabbro domain, possibly consisting of sulphides and gold.

Arranjo de semeadura da soja sobre o rendimento da cultura e da tecnologia de aplicação de produtos fitossanitários

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aquisição e interpretação de dados geofísicos e geológicos em mina de manganês supergênicos na região de Itapira (SP)

The mineral sector is of utmost importance for Brazilian economic growth, an area which depends on basic geological research to enlarge known deposits and in process of mining, besides discovering new occurrences and mineral deposits. This set of activities is named mineral research, which planning involves economy concepts, market demands and use of methods and techniques for geological evaluation, direct and indirect. This paper aim at performing geophysical detailing on occurrences of supergenic manganese located in the northwest portion of the State of São Paulo, Itapira, for spatial dimensioning of mineral targets, besides the attempt to correlate among the content on physical parameter measured by geophysics. The lack of scientific publications by Brazilian researchers in this theme, availability of previous studies for the selected targets, commercial importance of the mineral goods for the Brazilian Trade Balance, justify the performance of the present research project

Avaliação do enriquecimento aluminoso em perfil laterítico desferruginizado na Chapada Sedimentar do Triângulo Mineiro e potencial econômico

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sucessão estratigráfica e tratos de sistemas do Membro Romualdo, porção leste da Bacia do Araripe, nordeste do Brasil

Located in northeastern Brazil, the evolution of Araripe Basin has been associated with the fragmentation of Gondwana and opening of the South Atlantic. The Santana Formation belongs to the post-rift sequence of the basin and is characterized by the presence of laminated limestones in the lower portion (Mb. Crato), evaporite (Ipubi) and siliciclastics (Mb. Romualdo). For better understanding of the Romualdo's stratigraphy, depositional environments and tract of systems, a stratigraphic analysis was made with representative columnar sections of the unit. Sedimentary facies have been described in detail, as well as paleocurrents measured at different stratigraphic levels. It was found that the contact of Mb. Romualdo with the carbonate-evaporite section (Mbs. Crato and Ipubi) is a unconformity, evidenced by residual lags and thin layers of conglomerates above the contact. Above the conglomeratic levels predominate fine sandstones / medium interlayered with calciferous green shales. The percentage of shales increases towards the top, featuring retrogradational stacking culminating in layers of coquinas, excellent stratigraphic mark in the basin. Thin layers of coquins of gastropods comprising equinoids, located on the shale section, present in three sections marine deposits are associated with surfaces ravine. The upper section is characterized by recurrent facies of green shales, sandstones intercalated with sandstones progressively become more frequent towards the top of the unit, featuring the regressive part of the cycle. The sandstones present cross-stratification, often with mud clasts and clay layers in the foresets, and beddings of flaser type and wavy in heterolitic facies, suggesting the action of tidal currents. Paleocurrents measured in the sandstones show gaps with opposite flow directions outlining bipolar standards, which reinforce the interpretation of shallow marine environment influenced by tides during the sedimentation...

Caracterização geofísica e geológica das formações ferríferas do Grupo Macaúbas - MG

Pós-graduação em Geologia Regional - IGCE

Construção e validação de um túnel de vento para ensaios de estimativa da deriva em pulverizações agrícolas

The aim of this study was to build and validate a low cost reduced-scale wind tunnel for drift evaluation on pesticide application technology. The work was carried out at the NEMPA - Núcleo de Ensaio de Máquinas e Pneus Agroflorestais (NEMPA), FCA/UNESP, Departamento de Engenharia Rural, Botucatu/SP, Brazil. The wind tunnel main characteristics were an open circuit and a closed working section with a fan blowing air into the tunnel. Screens were fitted downstream after the fan in order to stabilize the air flow on the working section. The tunnel was built with 3.0 mm eucalyptus hardboard, with a total length of 4.8 m and a squared section of 0.56 m. The air flow was provided by a 180 W axial fan. The system was adjusted and calibrated to provide a laminar and stable flow at 2.0 m s-1. Validation studies were carried out by using a Teejet XR 8003 flat fan nozzle at 200 kPa (medium droplets) to apply a spray solutions containing water plus a food dye (Blue FDC) at 0,6% m v-1 mixed with two adjuvants: a polymer based anti drift formulation at 0,06% m v-1 and a sodium lauryl ether sulfate based surfactant at 0,2% v v-1. After a 10-second application the drift was collected on nylon strips transversally fixed along the tunnel at different distances from the nozzle and different high from the bottom part of the tunnel. Drift deposits were evaluated by spectrophotometry. The wind tunnel had low levels of turbulence and high repeatability of the data, which means that the flow was uniform and able to be used for carrying out measures to estimate drift. The validation results showed that the tunnel was effective to enable comparative drift measurements on the spray solution used in this work making possible the evaluation of drift risk potential under those spray technologies. The use of an adjuvant based on a polymer reduced the amount of drift from the nozzle compared to the surfactant.

Caracterização física e química e potencial de deriva de caldas contendo surfatantes em pulverizações agrícolas

The aim of this work was to evaluate the effect of the addition of different surfactants in physical and chemical properties of spray solutions, droplets spectra and drift potential on agricultural spraying. The surfactants and concentrations (v v-1) were: Haiten (0.1%), Antideriva and Intec (0.05% and 0.1%). The following characteristics were analyzed: surface tension, viscosity, density and electric conductivity. The droplet size spectrum was determined by a laser particle analyzer (Mastersizer S®, version 2.15) including measurements of volume medium diameter (VMD), the percent of droplets below 50 and 100 μm (V50 e V100) and index span. In order to estimate the drift potential, a series of wind tunnel tests were performed with a Teejet XR 8003 flat fan nozzle at 200 kPa (medium droplets) used to apply the spray solutions containing water, the adjuvants and a food color dye (Brilliant blue FD & C no 1) at 0,6% m v-1. The drift was collected on nylon strips transversally fixed along the tunnel at different distances from the nozzle and different high from the bottom part of the tunnel. Drift deposits were evaluated by spectrophotometry. The results showed that the addition of adjuvants changed physical and chemical properties of spray solutions in different magnitudes according to the surfactant. Surfactants changed the droplet spectrum and drift potential, indicating that higher VMD and smaller V100 induced higher percentage of drift.

Avaliação de pontas e taxas de aplicação na deposição de calda no milho e em plantas daninhas

O objetivo deste trabalho foi avaliar diferentes pontas e taxas de pulverização na deposição de calda na cultura do milho e nas plantas daninhas Euphorbia heterophylla e Brachiaria plantaginea, localizadas nas linhas e nas entrelinhas da cultura. O experimento foi conduzido em delineamento de blocos ao acaso, em esquema fatorial 2 x 2 (2 pontas de pulverização DG 11002 VS (jato plano e gotas médias) e TXVK08 (jato cônico e gotas muito finas) x 2 taxas de aplicação, 100 e 200 L ha-1) com quatro repetições. As aplicações ocorreram aos 13 dias após a germinação do milho (3 a 5 folhas expandidas), as plantas de E. heterophylla apresentavam de 2 a 4 folhas e as plantas de B. plantaginea de 2 a 3 folhas. Utilizou-se como marcador o corante Azul Brilhante (FD&C-1) na concentração de 3000 ppm. Conclui-se que os maiores depósitos médios nas plantas de milho foram proporcionados pela ponta TXVK08, independente da taxa utilizada e que os depósitos mais uniformes ocorreram quando utilizou-se a taxa de 200 L ha-1. Para as plantas daninhas localizadas na linha da cultura, as pontas de pulverização promoveram depósitos de calda mais uniformes na B. plantaginea do que na E. heterophylla, em ambas as taxas de aplicação. Para a B. plantaginea localizadas na entrelinha da cultura a ponta DG 11002VS foi a que proporcionou depósitos de gotas mais uniformes, sendo que para E. heterophylla a ponta mais eficiente em depositar gotas foi a TXVK08.

Integração de dados geofísicos e geológicos na caracterização morfológica de ocorrência de cobre na borda norte da Bacia do Camaquã (RS)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Geomorfologia e quaternário do rio Vaza-Barris, Nordeste, Brasil

Pós-graduação em Geociências e Meio Ambiente - IGCE

Dissolução redutiva de minério de ferro por Acidithiobacillus ferrooxidans para a recuperação de metais de interesse econômico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Laminitos microbiais no membro Crato (Neoaptiano), bacia do Araripe, nordeste do Brasil

Pós-graduação em Geociências e Meio Ambiente - IGCE

Da fonte à bacia: interação continente-oceano no sistema sedimentar Rio São Francisco, Brasil

Pós-graduação em Geociências e Meio Ambiente - IGCE

Estratigrafia do Andar Alagoas na sub-bacia do Tucano Norte, Bahia

Pós-graduação em Geociências e Meio Ambiente - IGCE