Morphological study of nitrides of NbTi (50:50, by weight) alloy

Plates of NbTi (50:50, by weight) were nitrided in a nitrogen atmosphere in the temperature range 800-1000 °C for 15, 30, 60, 120 and 180 min. X-Ray diffraction and optical and electronic microscopy were used to characterize the samples. Two nitride layers were identified on the substrate: an external and continuous phase of TiN, named δ, and a deeper and discontinuous phase of Ti 2N, named ε{lunate}. The electron micrographs reveal the presence of paths rich in Nb which may be responsible for the diffusion of nitrogen into the matrix. © 1993.

Efeito da suplementação com boro no metabolismo ósseo de camundongos diabéticos não obesos

Pós-graduação em Alimentos e Nutrição - FCFAR

Atributos químicos no solo e produção de Cynodon dactylon cv. Tierra Verde sob doses de biofertilizante orgânico

The concentration of nutrients in plant is related to the soil, fertilization, climate, season, cultivar and cultural practices. Aiming to evaluate the soil chemical properties, the dry matter production of shoots and roots, nutrient content in the plant and the chemical composition of the grass Tierra Verde subjected to levels of organic biofertilizer as nitrogen source, an experiment was conducted in a greenhouse at the Faculty of Veterinary Medicine , UNESP, Araçatuba-SP, January-September 2010. Treatments were arranged in a completely randomized design with six fertilized biofertilizer doses (0, 33, 66, 132, 264, 528 m3 ha-1) and five repetitions for three cuts. We used the model split plot, with doses of biofertilizer considered as main treatments and cuts as sub-plots. We obtained a linear response in the production of dry mass of shoots and roots to the dose of 528 m3 ha-1 of organic biofertilizer. Nitrogen fertilization influenced the soil chemical properties and levels of organic matter, sulfur, boron and manganese, and in foliar levels of phosphorus, potassium and copper. The chemical composition was not altered by the influence of organic biofertilizer doses applied to the soil.

Desenvolvimento de detector eletroquímico para cromatografia líquida de alta eficiência baseado em um eletrodo modificado com nanopartículas metálicas para determinação de ácidos carboxílicos em vinhaça de cana-de-açúcar

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Boro em cana-de-açúcar cultivada em solução nutritiva

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Solution heat treatment of plasma nitrided 15-5PH stainless steel - Part I: Improvement of the corrosion resistance

The results of the investigation on Solution Heat Treatment of Plasma Nitrided (SHTPN) precipitation-hardened steel 15-5PH are presented. The layers have been obtained by the plasma nitriding process followed by solution heat treatment at different temperatures. The influence of the solution heat treatment after nitriding on the dissolution process of the nitrided layer has been considered. The nitrided layers were studied by scanning electron microscopy, X-ray microanalysis (EDX), and X-Ray diffraction. Micro-hardness tests of the nitrided layers and solubilized nitrided layers have been carried out and interpreted by considering the processing conditions. It was found that high nitrogen austenitic cases could be obtained after SHTPN of martensitic precipitation-hardened steel (15-5PH). When Solution Heat Treatment (SHT) was performed at 1100 °C, some precipitates were observed. The amount of precipitates significantly reduced when the temperature increased. The EDX microanalysis indicated that the precipitate may be chromium niobium nitride. When the precipitation on the austenite phase occurred in small amount, the corrosion resistance increased in SHTPN specimens and the pit nucleation potential also increased. The best corrosion result occurred for SHT at 1200 °C.

Avaliação do estado nutricional de mudas de Gonçalo Alves (Astronium Fraxinifolium)

The planting of seedlings, the establishment and maintenance of the natural regeneration process, or the combination thereof, are methods used in the recovery of degraded or disturbed environments, however, often require the addition of soil conditioners. This study aimed to evaluate the influence of conditioners, introduced in degraded soil on growth and nutritional status of Astronium fraxinifolium seedlings. To conduct the experimentation were used as degraded soil conditioner, ash from sugarcane bagasse (CZ) and macrophytes (MC), at the doses of 0, 15, 30 and 45 t ha-1 and 0, 16 and 32 t ha-1 respectively, which combined produced 12 treatments, with three replications, and for field installation, was used the experimental randomized block design. Astronium fraxinifolium (Gonçalo Alves) seedlings, native tree species in cerrado, were introduced in the experimental area and, after 12 months, were evaluated for leaf concentration of nitrogen, phosphorus, potassium, calcium, magnesium, sulfur, boron, copper, iron, manganese and zinc (N, P, K, Ca, Mg, S, B, Cu, Fe, Mn and Zn, respectively). Seedlings and adult plants of A. fraxinifolium were collected in preserved cerrado reserve were also analyzed for nutrients foliar concentration to perform a comparative analysis. The leaves collection in the preserved cerrado and experimental area, was accompanied by soil sampling (0.0 - 0,20 m deep), which was analyzed for phosphorus, OM (organic matter), pH, K, Ca, Mg, Al+H (potential acidity), Al (aluminum), Cu, Fe, Mn and Zn. The results show that the applied residues contributed to raise the foliar concentration of Cu and Fe. The foliar concentration of nutrients was higher in A. fraxinifolium seedlings from preserved cerrado, except for B, which was similar between areas, besides Cu and Fe with higher levels in the seedlings from experimental area. The combined addition of residues (MC and CZ), led to increase the plants height and diameter. This...

Reguladores vegetais e nutrientes minerais no metabolismo de plantas de tomateiro

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Doses e modos de aplicação de boro na produção de mudas de nespereira

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Sinais de vibração no monitoramento do processo de retificação plana de cerâmicas avançadas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Acúmulo de nutrientes e resposta da alface à adubação fosfatada

Nutrient absorption and response of lettuce to phosphorus fertilization. The objective of this study was to evaluate the response of lettuce (cultivar Verônica) to different levels of phosphorus fertilization. The experiment was conducted from 25/09/2003 (sowing) to 03/12/2003 (harvesting) at the Fazenda Experimental São Manuel, UNESP/FCA, Botucatu/SP, under protective structures. The experiment was conducted in a randomized block design, with five treatments (0, 200, 400, 600 and 800kg.ha-1 of P2 O5, in the form of triple superphosphate) and five replications. Plants were grown in 13L plastic pots containing Latossolo Vermelho Distrófico Típico. A quadratic response was observed for the fresh mass of the plant shoots and leaf area, with maximum equivalent levels of 733 and 756kg.ha-1 of P2 O5 , respectively, as well as for potassium, calcium, magnesium, sulfur, boron, copper, iron, manganese and zinc accumulation. Linear increases were observed with the treatments of P2 O5 for dry mass of the shoots, leaf number, plant height and nitrogen and phosphorus accumulation.

Soil fertility, nutrition and early growth of physic nut as affected by nitrogen fertilization

The initial growth and mineral nutrition of the physic nut (Jatropha curcas L.) as a function of nitrogen (N) fertilization was investigated. The transplanting of seedlings was carried out in plastic pots filled with 50 dm3 of a Rhodic Hapludox, under a plastic greenhouse. In addition to a control treatment, the dosages of 0, 40, 80, 120, and 160 mg dm−3 N were tested. The results demonstrated that N fertilization for the cultivation of physic nut could be added as top dressing from 60 days after planting with a dosage of 65 mg dm−3. A SPAD index of 46 can be used as a nutritional reference to its initial development. Furthermore, the results suggested that the order of nutrient accumulation by the physic nut plants is as follows: potassium (K) > N > magnesium (Mg) > calcium (Ca) > phosphorus (P) > sulfur (S) > iron (Fe) > manganese (Mn) > boron (B) > zinc (Zn) > copper (Cu).

Doses e modos de aplicação de Boro e adubação com Zinco na cultura do milho

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da utilização de ferramentas a base de nitreto de silício (Si3N4) e alumina (Al2O3) na usinagem do ferro fundido vermicular

Machining is one of the most commonly manufacturing processes used in the modern world, consuming millions of dollars annually. Because of this, it is crucial for the automotive industry to reduce costs on their heat-resistant alloy machining processes, such as compacted graphite iron (CGI), which has shown an increasing trend of its application in diesel engine blocks, brakes disks, among other applications, due to its superior mechanical properties to gray cast iron. Despite this advantage, its use is still limited due to its difficulty of machining, moreover, cutting tools are displayed as the main factor in increasing the machining cost. Seeking an alternative to a better machinability of CGI, this paper aims to study two types of ceramic tools developed in Brazil, and benchmark their performance by dry turning. For this, were used CGI class 450 and two tools: ceramic of silicon nitride (Si3N4) and alumina-based (Al2O3), with a cutting speed (Vc) of 300, 400 and 500 m / min; feed (f) of 0.2 mm / rev and depth of cut (ap) of 0.5 mm, using three replicates and starting with new cutting edges. The results showed that the Al2O3 tool had the best performance in Vc of 500 m / min, while the Si3N4 tool had the best results in Vc of 300 m / min. This can be explained by the tool of Si3N4 based include soft intergranular phase, called amorphous, while alumina has higher abrasion resistance due to its high refractoriness. The results make it clear that the tools have significant potential for machining of compacted graphite iron, being necessary a strict control of the cutting parameters used