Sensores de amônia à base de polianilina preparados com impressora jato de tinta

Neste trabalho, apresenta-se o desenvolvimento de um sensor de gás amônia sobre substrato de papel, impresso por jato de tinta térmico. Para a realização do trabalho formulou-se uma “tinta”4 de polianilina (PANI), adequada para uso na impressora térmica. Neste tipo de impressão, é necessário que a tinta de PANI seja preparada de forma que a maior parte do seu volume seja de água. A PANI, em seu estado desdopado, foi dissolvida em n-metil-2-pirrrilidona (NMP), e com a adição de água em determinadas condições de preparo e proporção, foi possível formar uma tinta de PANI/NMP/H2O estável e adequada para o uso na impressora térmica, podendo-se assim depositar filmes de PANI sobre substratos flexíveis, como por exemplo, diversos tipos de papéis. Neste trabalho, tintas de PANI foram depositadas sobre papel comum (sulfite) e papel fotográfico (glossy). A caracterização morfológica, por microscopia ótica, indicou que a qualidade dos filmes foi satisfatória em termos de uniformidade e homogeneidade. A resistividade de superfície dos filmes de PANI, sobre substratos de papel sulfite e fotográfico, é da ordem de 1x109 / , quando desdopado, e 1x104 / , quando dopado com vapor de ácido clorídrico (HCl). As caracterizações elétricas AC sugerem que os filmes de PANI desdopados, sobre ambos os substratos, se comportam similarmente a um circuito equivalente RC, formado por um resistor e um capacitor em paralelo. Entretanto, após a dopagem tal representação deixa de ser válida. Medidas elétricas...(Resumo completo, clicar acesso eletrônico abaixo)

Incorporação de um sistema nobreak com ultracapacitor em um microcomputador

The objective of this work is to analyze the viability of incorporation in a microcomputer box of a nobreak with an ultracapacitor as energy storage device, substituting the conventional chemical battery. An advantage of this inclusion is cost reduction because a specific metallic or plastic frame won’t be necessary to protect the components of the nobreak; the microcomputer metallic frame offers the necessary protection for both equipments. Moreover, a large quantity of internal space of microcomputers box isn’t used, and is possible to use it to wrap up the nobreak. This work uses data about average power consumption of microcomputers; operation of switching mode power supplies for microcomputers; electrical and mechanical characteristics of ultracapacitors and operation of power circuits of nobreaks, with the purpose of present a study of energy storage capacity that an ultracapacitor should have to allow a safe switching off of a microcomputer in case of electrical network fail. It was noticed that the use of ultracapacitors is feasible to feed an 180 W load for 75 s, using a capacitive bank with sixteen ultracapacitors, with a total capacitance of 350 F and voltage of 10,8 V. The use of the proposed nobreak increases the reliability of the microcomputer by reducing the probability of user data losses in case of an electrical network fail, offering a high cost/benefit product. The substitution of the battery by an ultracapacitor allows a quick nobreak recharge, with low maintenance costs, since ultracapacitors have a lifetime bigger than batteries; beyond reducing the environmental impact, because they don’t use potentially toxic chemical compounds

Viabilidade de turbinas eólicas de pequeno porte no Brasil

Facing a global scenario where oil is scarce and the emission of CO2 in the atmosphere is a world concern, the search for new methods of energy production becomes the focus of all countries. Based on these assumptions, the wind power gains highlight and happen to be the most exploited around the world, since this does not produce toxic waste, since it uses the wind, no raw material shortage and its cost and efficiency are increasingly attractive. Taking advantage of the geographical features of Brazil, coastal and territorial extension, this study aims to analyze the feasibility of using wind turbines widely used in Germany, one of the countries with the highest production of energy through wind, in Brazil. In order to increase the energy production without causing more environmental impacts, geographical analyses will be made, and to determine the features and costs of production of this type of energy generation, and at the end of this dissertation, will finish for one of the turbines, Montana, is it feasible to install, however due to the Government's little incentive return is not very expressive. With respect to the turbine Passaat, this is infeasible to install under current conditions

Avaliação da viabilidade econômica do uso de um aquecedor solar de água de garrafas pet para aquecer o ar de uma cabine de pintura e uma estufa de secagem

Nowadays, the biggest part of the world's energy supply comes from fossil fuels and nuclear. However, the current need of the society for the preservation of the environment and wise use of natural resources, has favored the search for alternative energy sources and improvement of energy efficiency. In this new scenario, companies are beginning to mobilize in order to adapt its facilities to renewable energy. Solar, with its immense potential, not really exploited yet, can be very useful for companies that want to beat their sustainability goals. Given these facts, the aim is to evaluate the economic viability of introducing a solar water heater which uses a colorless PET bottle as one of its components in a plant. The hot water generated will heat the air of a paint booth and a warm house, reducing energy consumption, since they are heated by electric heaters

Análise comparativa entre sistemas de resfriamento de injeção de plástico

This study aims to prove the economic feasibility of the installation of mechanical compression chillers on plastic injection molding machines in order to reduce the production cycle time of toothbrush cables in a specific case study. This evidence was confirmed by the comparative analysis of the system replaced and the new system installed. The old system had only one closed loop cooling tower which pumped chilled water to the injection molds, and the new system has the same tower sending cold water to the condensers of individual chillers installed on each injection machine. We conducted an analysis of energy efficiency in each system, showing that in terms of thermal efficiency virtually nothing has changed, but in terms of electricity demand the new system consumes 60.3 kW more. We conducted an analysis of machine productivity for both systems, showing a much higher productivity of the new system due to reduced cycle times caused by the presence of chillers and their greater cooling capacities. Equipped with data such as electricity rates, increases in operating costs and initial investments, the increase in consumption and demand of electricity plus the cycle time reduction were also calculated over so the simple payback 1 year and 2 months was reached

Desenvolvimento de um anteprojeto de um sistema de digitalização da proteção e controle aplicada a uma subestação elétrica industrial de alta tensão

The proposed of scanning of an electrical industrial substation HV is associated with a segment of the Electrotechnical area and aims the study and preliminary application of digital technologies in the protection, control, measurement and automation maneuvers aimed at a Industrial Electrical System typical High Voltage. Well intended to supervision, protection and control of major electrical and thermal quantities involved in a substation, such as voltage levels, current, temperature, power factor, loads of transformers and circuit feeders, status of interlocking devices, switching equipment maneuvers, etc

Modelagem e Simulação Computacional das propriedades estruturais, eletrônicas e constantes elásticas do ZnO

The electronic, structural properties and elastic constants of the wurtzite phase of zinc oxide, ZnO, was investigated using computer simulation at Density Functional Theory level, with B3LYP hybrid functional and Hartree-Fock methodology. The electronic properties as well the band energy was investigated through the analysis of the band structures and density of states (DOS), and the mechanical properties was studied through the calculus of the elastic constants C11, C33, C44, C12 e C13. The results are in good agreement with experimental data found in the literature and in accordance with results obtained by another theoretical methodology

Estudo da motilidade gástrica em ratas prenhes diabéticas e não diabéticas

Several hormonal and physiological changes that occur during pregnancy directly affect gastrointestinal motility (GI), however, very little is known about the relationship between the electrical and mechanical activities of the stomach and its implications. The aim of this study was to compare the female sex hormones, with profiles of gastrointestinal motility using AC biosusceptometry (BAC) in pregnant rats. Seven female Wistar rats (weighing 250-350 g) were used and all procedures were approved by the local Ethics Committee of animal. Laparotomy was performed on anesthetized rats and a magnetic marker (3.5 mm in diameter and 3.0 mm height) was implanted in the distal stomach. After 10 days of recuperation, the mice were put to mate until confirmation of pregnancy. Fed animals were anesthetized (mg pentobarbital 30 / kg) and kept supine for recording the signal with a sensor 30 min BAC placed on the abdominal surface on days 0, 7, 14 and 20 of gestation. Statistical analysis was performed by Student's t test statistical Newman-Keuls and a P value of .05 was considered statistically significant. The frequency of contraction of the stomach was 74 mHz ± 3, 67 ± 7 mHz, 59 mHz ± 6 (p <0.05 vs day -1) and 71 ± 5 mHz on days -0, -7, -14, and -20, respectively. The values of 44 ± 15 pg / mL and 31 ± 9 pg / ml 25 ± 6 pg / ml, 22 ± 9 pg / ml on days -0, -7, -14 and -20, respectively, obtained by 17ß- estradiol were not statistically significant. The values of progesterone were 13 ± 6 pg / ml at 54 ± 15 pg / ml, 127 ± 42 pg / ml (p <0.05 vs day-1), 22 ± 13 pg / mL on day -0, - 7, -14 and -20, respectively. A linear correlation (Pearson's test) between the lower frequency gastric and increased levels of progesterone was 80% (p <0.0000001). Until then, the relationship between changes in motility and hormone were not described in detail, but with the work that we were able to demonstrate the high correlation between progesterone concentration ...

Análise da evolução de pacientes com paralisia facial periférica submetidos a reabilitação

INTRODUÇÃO: A paralisia facial periférica (PFP) consiste no acometimento do sétimo nervo craniano, de forma aguda, podendo ser precedida por dor na região mastoidiana e resultando em paralisia completa ou parcial da mímica facial. É, na sua grande maioria, de causa idiopática ou apresenta diversas etiologias como diabetes mellitus, hipertensão arterial, herpes zoster, viroses, otites médias, infecções (lepra, sífilis, doença de Lyme), sarcoidose, traumatismo e tumores. Apesar da paralisia facial periférica ter sido descrita em 1821, por Sir Charles Bell, ainda hoje existe muita controvérsia a respeito da etiologia e tratamento. A incidência da PFP encontra-se entre 20 a 30 casos por 100 mil habitantes, com prevalência ligeiramente maior entre as mulheres. Baseado nessas premissas, este estudo teve por objetivo avaliar a evolução de pacientes com paralisia facial periférica submetidos a um protocolo de reabilitação. METODOLOGIA: No estudo foram incluídos 30 pacientes com diagnóstico de paralisia facial periférica idiopática, atendidos no Centro de Estudos e Reabilitação em Fisioterapia (CEAFIR), da FCT-UNESP, campus de Presidente Prudente. O presente estudo adotou como procedimento fisioterapêutico os protocolos I, II, III e IV. Antes de realizar qualquer técnica, abaixo mencionada, foi explicado ao paciente cada passo, para evitar surpreendê-lo. Conforme os pacientes apresentassem melhora e evoluções nas reavaliações elétricas, foram feitas recomendações de exercícios para mímica facial, em frente ao espelho. As repetições eram aumentadas gradativamente, posteriormente os mesmos exercícios, mas agora ativos resistidos. RESULTADOS: Os valores das variáveis reobase, cronaxia e acomodação, nos garantem que o protocolo usado permite avaliar a condução nervosa do facial, o grau de evolução da condução nervosa, bem como acompanhar... (Resumo completo, clicar acesso eletrônico abaixo)

Comparação de custo e viabilidade técnica de obras com parede de concreto em relação a obras de alvenaria estrutural

Are being released in the construction market in Brazil ventures called Super 6. These businesses sell the promise of delivery of the apartment in six months after the launch of the venture. To meet this deadline are being deployed the constructive method of concrete walls using aluminum shapes. This system basically consists of pouring slabs and walls once, i.e. building up the wall shapes and slab joints. On the walls are used cloth, with reinforcements in vain and corners of walls and on these screens are tied the electrical boxes and conduits. For each tower is used the so-called system of half way, i.e. the system so it is sufficient to mount the Middle deck. Using a concrete which can be deformed in the next day you can lift one deck every two days with ready electric and hydraulicsystem, without having to tow the wall doing only minor fixes in the imperfections after concrete. With this system won an incredible speed in the construction of the structure reducing in almost one-third the length of the work. This work aims to compare in terms of cost-benefit of masonry structural systems and this new concrete wall system called Super 6. For this comparison will be used as parameter values used for the achievement of the Enterprise Portal of Roses of constructor Tenda which is one of the first to use concrete wall system. This project basically consists of seven towers of six floors each and will be budgeted the cost of this project if it were held in structural masonry. From these data it will be possible to make a comparison about the actual beneficial to adopt this system

Propriedades físicas de vidros Sb2O3-P2O5

This work presents experimental results of some physical properties of antimony phosphate glasses with compositions (x) Sb2O3 - (1-x) P2O5 (x = 0.75, 0.85, 0.90). Mechanical, thermal, optical and electrical properties were investigated: density, elastic moduli (Young's moduli and Poisson's ratio), Vickers microhardness, coefficient of thermal expansion, glass transition temperature, refractive index and electrical conductivity (for x = 0.75). There was no evidence of electronic conductivity by bipolaron hopping. Measurements of energy dispersive spectroscopy (EDS) showed that volatilization of Sb2O3 takes place during the glass melting

Proteção de sistemas eletricos industriais: relés e suas aplicações em subestações

Electrical installations in industries involving high currents and voltages considered. On the other side is the common appearance of electrical failures, caused by human error, defects in electrical equipment or electrical installation aging itself. These failures are varied, those with the highest rate of occurrence and cause much damage to electrical installations, are overcurrent and overvoltage. Therefore there is a need to project a system that can detect and minimize possible effects caused by faults in electrical installations industries. Protection systems in electric industries emerge as an alternative to control especially voltage and current magnitudes. Engineered based on the functions of the relays, protection systems are an indispensable tool for any industrial substation. But the project of such systems becomes increasingly more complex, due to technological development. Electrical equipment not develop at the same speed that the protective devices (relays), making it indispensable knowledge of integration of technologies

Um estudo de novos paradigmas na realização de projetos de instalação elétrica residencial (automação)

Through awareness of new trends of consumption of the population with regard to housing, comfort, entertainment, security and sustainability, it was crafted a work that set out to study and develop the concept of home automation and how it will revolutionize the electrical installation projects and energy savings. A pre-wiring project, taking into account, basically, the installed load, is presented as a basis for comparison. The protocols for communication between intelligent devices in an automation environment, used in the work, are the X-10, LonWorks and UPnP. The home network is studied and divided into subsystems, for a better understanding, which are the lighting, audio, video and multimedia system, security, air conditioning and central vacuum system, and the idea of integrated design and system integrator is introduced, showing the change necessity in the design philosophy of electrical installations. The main means of energy savings in an automated home, such as dimerization, master off and smart meters are presented and, finally, it was concluded that there is a need to structure electrical installation projects more comprehensive with regard to home automation, in order to become more efficient and useful to users

Desenvolvimento de filmes finos de Bi3NbO7 pelo método dos precursores poliméricos em diferentes eletrodos óxidos

Technology always advances and thus the device miniaturization and improved performance, besides multifunctionality, they become extremely necessary. A wave of research on the area tends to grow in number and importance in today's market, it is necessary to search for new materials, new applicability of the existing ones and new processes for increasingly cheaper costs. Dielectric materials are considered a key element in this sector being the main electrical properties its high dielectric constant and low dielectric loss. The Polymeric Precursor Method appears as a good alternative because is a low cost, simple process with controlled stoichiometry. In this method, two steps were performed. In a first step, the precursor solution was decomposed into powders and in a second step the precursor solution was converted in thin films. In this work, was used the polymeric precursor methods to get thin films where they were heat treated and characterized by XRD, SEM and AFM. We have obtained Bi3NbO7 thin films with good homogeneity and uniform distribution of grains were noted. We observed that the best condition to obtain the tetragonal phase is annealing the film at high temperatures for a longer soaking time and with excess of bismuth. Several oxides electrodes were evaluated aiming to obtain textured dielectric thin films

Avaliação das impedâncias em pontos de acupuntura

An experimental study in dogs was accomplished to evaluate impedances at the acupuncture points and the relative false points. According to the physics concepts and the Ohm’ Law, an electrical circuit was set up to determine the impedance. This circuit was introduced into three experiments in anesthetized dogs with needles at selected points. In the first two experiments, was applied an alternating tension with 200Hz frequency in the circuit and, in the last experiment, the frequency was increased to 10kHz, the tensions and electrical currents were measured between every pair of points for the all experiments. The impedances were calculated with the values obtained by experiments. The analysis of impedance values indicated that there is a coherent relation between the results and the applied frequencies in circuit, so just at high frequency condition admits the correct measurement of total impedance, therefore the last experiment gave the result which agreed with the theory, that the impedances at acupuncture points are lower than the impedances at false points