Seleção, avaliação e utilização de uma levedura personalizada para a produção de etanol

Pós-graduação em Microbiologia - IBILCE

Estratégias de condução de populações segregantes de soja portadoras do gene RR e seleção por meio de análises uni e multivariada

Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV

Seleção de famílias e progênies de irmãos completos de cana-de-açúcar para atributos tecnológicos e de produção pelo método de REML/BLUP

The objective of this study was to assess families and highlight the superior progenies of sugarcane originating from 38 biparental crosses for the following attributes: tons of cane per hectare (TCH), tons of biomass per hectare (TBIOH), brix (% cane juice), fiber content, purity, pol and total recoverable sugar (TRS). The data were analyzed by mixed model REML / BLUP in the REML (Restricted Maximum Likelihood) allowed us to estimate genetic parameters and BLUP (best linear unbiased prediction) to predict the additive and genotypic values. The best family for the attributes TCH and TBIOH was 41, whose parents are cultivars IACSP022019 x CTC9. In individual selection for TCH, the plant number 3 of Block 2, the crossing 78, showed the best results. To TBIOH the plant number 33, Block 1, family 41, showed the best results. Families 40, 41, 43, 68, 69, 79, 91, 92 and 147, were higher for the variables brix, pol, purity, and ATR, where as 85 families, 147, 148, 149, 161, 163, 177, 178, 179, and 183 were higher for fiber. The family 147 whose parents are IACSP042286 x IACSP963055, showed three progenies ranked among the top ten for both brix, and for fiber, which identifies the combination as a potential source of progenies for bioenergy production.

Estimativas dos parâmetros genéticos para seleção de árvores de Eucalyptus

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Capacidade de combinação para seleção de genótipos de milho

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito da utilização de diferentes critérios de controle de qualidade dos genótipos em estudos de associação e seleção genômica ampla

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fatores biomecânicos relevantes na seleção dos grampos em próteses parciais removíveis com extremo livre: estudo clínico

The free-end removable partial dentures (RPD) shows a complicated and peculiar biomechanical behavior that impose high occlusion forces to the abutment teeth. By this way, the aim of this study was to evaluate the several factors that influence the clasps indication to free-end RPD. It was analysed 84 designed and planned study models of 71 patients, involving 130 clasps near-by a free-end; followed by clinical and radiographical informations. It was observed that bar clasps (“T”, “Tmod”, “i”) were used in 88.46% of abutment teeth. In the others (11.55%), it was used simple, combinated or ring circumferential clasps, and MDL. In abutment teeth with high equator line the “i” clasps were predominant (48.48%). The “Tmod” clasps were predominant in abutment teeth with low equator line (50%) or in middle third (51.35%) and “T” clasps were predominant in inclined equators with mesio-buccal (56.52%) or disto-buccal (66.66%) retention. In the posterior abutment teeth, it was prevalent the distal rest (63.52%) and embracing to the adjacent tooth. Some others factors like long clinical crown (5.38%), wrong position of abutment teeth (4.61%), aesthetics (3.07%), retention in alveolar ridge (2.3%), fragility of abutment teeth (1.53%), short clinical crown (0.76%) and short space to the clasp (0.76%) influenced directly during the clasps selection. Factors like mobility of abutment teeth, height of muscular insertions, depth of buccal fornix and antagonist arch acted like secondary factors. After the informations analysis it may be concluded that the bar clasps with distal rest and embracing to the adjacent tooth were the most indicated to free-end RPD

Avaliação dos fatores críticos para a seleção e aplicação clínica dos pinos de fibra: relato de caso cliínico

Teeth that have lost much of their coronal tooth structure need intraradical devices to achieve a desired retention of the restorative material, restoring aesthetics and function to the patient. For this purpose, various types of intracanal posts have been studied, of wich the fiber posts have been highlighted with its increasing use in the dental market. The purpose of this study was to present a clinical case of using fiberglass post. As well as critically analyze the published works and points of controversy described by different authors related to factors such as different protocols cementation, surface treatments pins, fracture toughness and compression, the possibility of microleakage, diameter and length of the pin, and the various materials used in conjunction with the intracanal retainers. Thus, we concluded that fiber posts showed as an excellent alternative for anterior teeth, since have least 2 mm of tooth remaining.

Considerações relevantes na seleção de dentes artificiais

Nowadays the search for aesthetic in removable dentures is considered a success clinical factor. Besides, both the selection of artificial denture teeth and the characterization of dentures have been based on the facial harmony and cultural factors. But these factors change over time. Therefore, the present study aimed to discuss the selection of artificial denture teeth in relation to patient’s variables such as face shape, skin color, hair color, eye color, age and gender. Moreover, artificial denture teeth’ color, shape and size were presented.

Controle do crescimento e da seleção folicular por fatores locais e sistêmicos na espécie bovina

The regulation of ovarian activity is an integrated process involving extraovarian signals and intrafollicular factors. In such process, gonadotropins have an important role, but not always crucial. The initiation of primordial follicle growth and the early stages of folliculogenesis can occur without gonadotropins, however FSH may affect the rate of preantral follicle growth. On the other hand, the antral follicle development from 1 to 4 mm in diameter is completely gonadotropin-dependent in bovine, and the alternation of dependency from FSH to LH may be part of the mechanism involved in follicular selection. Locally produced growth factors, such as the IGF system, work in association with gonadotropins throughout the follicular growth and can influence follicular selection. Thus, the integration of these extraovarian signals and intrafollicular factors seems to determine whether a follicle will continue to develop or go atretic. This review focuses on the interaction between gonadotropins and intrafollicular factors in follicular development and selection in cattle.

Densidade, seleção de micro-habitat e distribuição de Phylloscartes eximius (Aves: Tyrannidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Área de vida e seleção de habitat por sabiás (Turdus leucomelas, Turdidae) em ambiente urbanizado

Pós-graduação em Ciências Biológicas (Zoologia) - IBRC

Metodologia para seleção e implantação das Tecnologias da Informação e Comunicação no ensino da educação básica

Pós-graduação em Matemática em Rede Nacional - IBILCE

Design & seleção de materiais: elaboração e execução de um sistema de informações para projeto do produto: madeiras

Wood is a renewable material and has unique characteristics that stem from its orthotropic properties. The objective of this study was to develop and implement an informational Selection of Materials and Manufacturing Processes appropriate to the activity of Product Design - Woods. Composed of a Digital Information System, distributed, and an ordered collection of samples. The design of a product, carries with it the choice of material, and the choice of a manufacturing process. Information on materials and manufacturing processes are available with different content, media and interfaces. However, such information is not systematized so that they can be recovered, as the need for the designer, especially on wood. This set of methods is called the Selection of Materials and Manufacturing Processes. It is hoped through this study that the methodologies for SMPF are employed by product designers, architects and engineers in Brazil.

Desempenho de crianças com deficiência auditiva e implante coclear em tarefas de seleção de e de nomeação de figuras

The aim of this study was to investigate the development of specific domains of Numerical Cognition (Number Sense – NS, Number Comprehension – NC, Number Production – NP, and Calculation – CA) in Brazilian children with Specific Learning Disorders. The study included 72 children (36 boys), from 9-to 10-years-old, enrolled in 4th and 5th years of elementary school of public schools at countryside of Sao Paulo State, Brazil. They were divided into three groups: control (CT, N = 42), Developmental Dyslexia (DL, N = 11) and Developmental Dyscalculia combined with dyslexia (DDc, N = 19). All participants had intellectual level within the normal range, however, children from the last two groups had Learning Disorders classified by School Achievement Test - TDE (Stein, 1994) and DDc children received necessarily classification as 'inferior' in Arithmetic Test of TDE. The children did not differ in NS. DL and DDc children showed slight deficits in NC. However, DDc children had moderate in NP and mild to moderate deficits in CA, which indicates a more generalized impairment in Numerical Cognition. Furthermore, DDc children showed discrepancy in Numerical Cognition performance when compared to the other groups. Thus, children with Learning Disorders showed different performances in Numerical Cognition, although both groups had preserved SN, DDc children showed higher deficits and discrepancy in relation DL and typically developing children.