Possíveis relações entre esquizofrenia e atividade física: uma revisão temática

Esse estudo tem como objetivo, utilizando revisão de literatura, evidenciar a importância na atividade física para pacientes com transtornos mentais, com foco mais específico na esquizofrenia. Por ser uma doença neurodegenerativa e que o paciente geralmente convive muitos anos com o seu agravamento, busco mostrar os benefícios das práticas corporais na qualidade de vida e agravantes da doença, nos indivíduos acometidos por esta. Assim como saliento a importância de mais estudos com foco específico na atividade física, por se tratar de um tratamento não medicamentoso que traz benefícios físicos, fisiológicos, moral, afetivos e cognitivos. Apesar de não ser evidente o desaparecimento de sintomas específicos da doença, o exercício físico auxilia, principalmente, nos sintomas negativos da doença, os quais os medicamentos pouco afetam; além de ser uma das formas de tratamento para as doenças cardiorrespiratórias muito evidenciadas nos pacientes esquizofrênicos. Não obstante, vale ressaltar a importância de considerar a individualidade de cada sujeito, pois cada um responde de uma forma as atividades, seja por experiências anteriores, ou pelo agravo da doença; assim como o tipo de prática utilizada, a qual pode ser mais motivadora para alguns, e menos para outros

Avaliação das condições de contorno da teoria de Hertz, comparando os resultados analíticos e numéricos a partir de simulações em software de elementos finitos

The objective of this study was to present the comparison between analytical and numerical results trying to identify the differences and behaviors of the variation of the principal stresses and the maximum contact pressure for different model configurations. The analytical equations of the theory of Hertz from the boundary conditions adopted by him were differences are shown. A step-by-step of developing the model indicating the geometric dimensions, surface contact, type of contact, the formulation used by the software, type of mesh, as well as the boundary conditions and load was presented. In the results, the stresses calculated analytically and compared with the stresses obtained by the finite element simulation software indicating the changes have been made

Avaliação da tenacidade à fratura em juntas soldadas circunferenciais de tubulações de processo

This work aims to analyze the toughness of a welded joint in the presence of a crack through the analysis of maximum tension the material can withstand the presence of this type of defect, since a discontinuity is likely to occur in this type of joint and its detection and its design is simple, using non-destructive testing techniques. The study will be conducted through the CTOD test - Crack-Tip Opening Displacement, with type specimens SE (B) - Single Edge Bend taken from a weld in the L-C position in relation to the length (longitudinal axis) of a test tube. The main idea is to simulate the welding conditions for the manufacture of industrial pipes, made in boiler shops (pipe-shop) within petrochemical plants. These pipes are often subject to operation with flammable and toxic subjected to high pressures and temperatures, where one can break the line can cause irreparable damage to the plant, the environment and the health of surrounding communities. With this study we evaluate whether the weld metal has the same properties as fracture toughness of the base material. This study shows the importance of using a qualified welding procedure for performing quality welds while maintaining the properties of the fracture toughness of the base metal. It was found from the results of tests using a welding procedure described for carrying out welding ensures mechanical properties very close to the base metal, which in terms of design is great, since one can ensure that the weld will the same characteristics of the base metal specified for the assembly of the pipe

A atividade física na saúde mental: uma revisão de literatura

Ao longo da história, a doença mental passou por diversos períodos de críticas relações com a própria humanidade, exposta à vulnerabilidade dos mitos e pré-concepções que motivaram a perseguição e segregação daqueles seres humanos qualificados como “insanos”. No Brasil, as primeiras intervenções específicas de atendimento à doença mental só ocorreram a partir da segunda metade do século 19. Atualmente a doença mental representa um dos maiores gastos da rede do SUS (Sistema Único de Saúde) (Ministério da Saúde do Brasil, 1999). Nas últimas décadas, a fim de diminuir o tempo de internação e o gasto com medicamentos, um conjunto de iniciativas surgiu como forma de transformar a compreensão cultural e a relação da sociedade com as pessoas que apresentam transtornos mentais. Dentre as novas propostas humanizadoras de atendimento, a educação física e, particularmente, o exercício, vieram mostrar sua contribuição nessa área. Para Silva (1995), a atividade física acarreta uma complexa rede de reações bioenergéticas no organismo e essas acabam por melhorar o rendimento físico e mental dos pacientes nas atividades de vida diária. Tendo em vista a relevância da intervenção através da atividade física no campo da doença mental, o objetivo deste trabalho foi analisar resultados dos estudos que demonstraram os benefícios da atividade física para indivíduos com transtornos psiquiátricos, considerando os aspectos fisiológicos e emocionais dos mesmos, através de revisão da literatura científica. Para isso, foi feito um levantamento nas principais bases de dados através do cruzamento de palavras chaves, tais como “saúde mental e atividade física”, “doença mental e atividade física”, “esquizofrenia e atividade física”, “transtorno psiquiátrico e atividade física”, “transtorno bipolar e atividade física”. Os resultados dos estudos revelaram que a atividade física possui...

PARFOR e a formação inicial dos professores: um estudo sobre a confiança, as atitudes e as estratégias em relação à resolução de problemas

The mathematical problem solving is very important in the student's school career, leading him to develop his creativity and self-confidence. The way the teacher explains specific content may interfere in the student learning. Some researches show that the teacher trust and his problem solving rapport lead to a more satisfying job. This research focused on students of the course PARFOR at UNESP Bauru. This work was performed in order to investigate the affinity, trust and attitudes toward mathematical problem solving, the performance from who have positive and negative attitudes and the results that may be generated during class

Uso do modelo de simulação 'ABC 6' para avaliação de áreas sujeitas à ocorrência de ondas de cheia e corridas de massa/detritos: estudo de caso na bacia do Ribeirão da Prata (SP)

Pipelines are linear engineering works, designed mostly for transporting oil and its derivatives for long distances, furnishing even the farthermost zones of the country. Due to oil sector needs to ensure for the safety and conservation of its properties, several geotechnical studies are being held at the pipelines field, in order to preserve this important transportation, and also to prevent accidents, which might seriously compromise the environment and the population who lives around it. The OSBRA pipeline, who connects the city of Paulínia to the capital Brasília, is one of these engineering works that deserves to be pointed out. This research, performed at the Ribeirão da Prata Basin, was a pilot study conducted with the main objective of testing the current methodology efficiency, for future applications in the closest watersheds to the OSBRA pipeline. The objective of this research is to analyze flood wave and debris flow processes in a non-fictional watershed, by comparing two different kinds of methods: the first one based on simulation models (software ‘ABC 6’), and the other one by flood wave and debris flow susceptibility mapping. The results from the hydrological modeling were both hydrographs and ietographs that estimated values of outputs and infiltration. To construct the susceptibility maps were necessary three other maps: ground use and occupation maps, divided according to the different protection degrees that were offered to the ground; maps of dam locations in the area and physiographic compartimentation maps, divided according to the local geology. To complete the methodology, the results were collected from both methods for comparison. The obtained product for this methodology was series of data whose different susceptibility degrees to flood wave and debris flow could define the safest route for a pipeline crossing in this watershed...

Estudo do método Monte Carlo e sua aplicação no modelo SIR

In this work we present a discussion and the results of the simulation of disease spread using the Monte Carlo method. The dissemination model is the SIR model and presents as main characteristic the disease evolution among individuals of the population subdivided into three groups: susceptible (S), infected (I) and recovered (R). The technique used is based on the introduction of transition probabilities S-> I and I->R to do the spread of the disease, they are governed by a Poisson distribution. The simulation of the spread of disease was based on the randomness introduced, taking into account two basic parameters of the model, the power of infection and average time of the disease. Considering appropriate values of these parameters, the results are presented graphically and analysis of these results gives information on a group of individuals react to the changes of these parameters and what are the chances of a disease becoming a pandemic

Estudo dos parâmetros físicos na fluidização em um leito gás sólido

Through measurements of basic parameters for determining the fluidization regime, as particle size, minimum fluidization velocity, bed porosity, etc., This paper analyze the mass distribution of the phases of the bed to be discussed in relation to: the flow gas physical properties of the solid particles and the forces acting on the solid particles circulating within the bed, as the weight force, buoyancy and drag forces (Stokes' Law). Due to the weight force is constant, open up the discussion about which of the other two forces, buoyancy and drag force, influencing the behavior of the bed. We used the photographic method to realize the statistical analyzes. Therefore, we can conclude what changes can be made more convenient in fluidizing the bed to obtain the highest efficiency for a good mixing used in industrial processes

Aplicação do método AHP para hierarquização de condicionantes de corrida de massa

Among the flow, the flows have the highest destructive potential, may cause disasters with a very high number of victims, as recorded in the events Caraguatatuba (SP) and the Serra das Araras (RJ) in 1967; Valeu do Rio Figueira, in Timbé do Sul (SC) between 1995 and 1996; Vale do Itajaí in Santa Catarina, in 2008, Teresópolis, Petrópolis and Nova Friburgo (RJ), in December 2010 and January 2011. This project aimed to prioritize the main determinants of inducing processes of debris flows by applying the method of decision making AHP (Analytical Hierarch Process). Therefore, the following stages of work were defined: research of the major factors of debris flows, questionnaire design method for application of AHP expert on the subject, analysis of the results obtained from calculating the ratio of consistency and preparation of proposal for hierarchical of conditions for debris flows. From the surveys it was possible to establish a relationship of conditions according to the scale of work, defining three levels: regional (1:250,000 to 1:100,000), Semi-Detail (1:50,000 to 1:25,000) and Detail (1: 10,000 or higher). The factors found were: concentration time, the flood wave, rain, landslide susceptibility (slope), drainage and development in the deposition. The project analyzed the results obtained from the questionnaires, which allowed the ranking of the constraints, contributing to weight constraints in studies of multicriteria mapping of susceptibility to the occurrence of debris flows. The study showed that the most of the analyzed datas were inconsistent because of the different opinion of the judges

Comportamento fractal de superfície da zona de estiramento em aço 300M temperado

Fracture surfaces are the fracture process marks, taht it is characterized by energy release guieded by failure mode. The fracture toughness express this energy em stress and strain terms in pre-cracked samples. The strectch zone is the characteristic region forms by the transition of fatigue fracture and final fracture and it width demonstrate the relation with failure energy release.The quantitative fractography is a broadly tool uses in failure surfaces characterization that it can point to a material’s aspect or a fracture process. The image processing works like an investigation tool, guinding a lot of studies in this area. In order to evaluate the characterization effectivity and it respectivity studies, it used 300M steel that it was thermal treated by an aeronautical process known and it characterized by tensile test and energy dispersive spectroscopy (EDS). The tensile test of this material, made by ASTM E8, allowed the head treatment effectivity confirmation, beyond of mechanics porperties determination. The EDS confirmed the material composition, beyond of base the discussion about fracture mechanism presence. The fracture toughness test has also made, that it works to obtain the fracture surfeaces studies below self-similarity and self-affinity approaches. In front of all the exposed it was possible to conclude that the fractal dimension works like a study parameter of fracture process, allowinf the relation of their values with changes in thickness, which interferes directly in material’s behaviour in fracture toughness approach

Comparação de métodos de dimensionamento de muros em solo reforçado através de programas computacionais

Dans ces dernières années, plusieurs méthodes de dimensionnement d'ouvrages de soutènement en sol renforcé ont été développés, mais la doute c’est où l'utilisation de chacun d'eux se révèle plus avantageux? Ce travail a été conçu avec l'objectif de faire une étude d’un cas historiques d'un mur en remblais renforcé avec parement végétal de 27,6 mètres de haut, dont la conception a été analysé en utilisant une méthode de calcul et des logiciels informatiques spécifiques à l’utilisation dans le domaine géotechnique. Avec cette étudesont attendus de résultats capable de présenter les principales caractéristiques de chaque méthode et où il peut le mieux être appliquée

Avaliação experimental de medidas de aceleração

Acceleration is a key parameter for engineering and is becoming increasingly important because of the need for companies to become more competitive in the market. Both applying new technologies to their products and optimizing their process lines with predictive maintenance and robotic automation. This study aims to analyze the quality of the signals obtained from a capacitive accelerometer. To do that a test rig was mounted, which consist of a shaker, fed by a signal generator, a linear potentiometer and a capacitive accelerometer; for the signal acquisition was used a acquisition board and the Labview software, in order to integrate twice the signal from the accelerometer and compare it with the sign of the potentiometer. This work also demonstrates the impact of acquired signal processing as well as techniques of pre and post processing of signal via software GNU/Octave

O mito nas Heróides de Ovídio: epístola I (De Penélope a Ulisses)

The objective of this work is to carry out a study about some aspects of the myth in the book Heroides, written by the Latin author Ovid (43 b.C. – 17/18 A.D.). To do so, this study will focus on the Letter I (“From Penelope to Ulysses”) approaching not only the stylistic issues of the elegiac genre, but also, studying them in connection with the epistolary subgenre. Departing from some biographical remarks about the author and from studies made by scholars about this poet, this work seeks to address the myth and certain little explored features of this genre, as the use of rhetoric

Análise dos procedimentos metodológicos de dimensionamento e execução de parede diafragma

The present paper conducts an analysis of all steps for the construction of diaphragm walls, from obtaining the soil parameters until its execution. Construction stages of diaphragm wall are detailed. The paper presents a detailed analysis of the main available calculation methods to obtain the soil parameters and the design of the diaphragm wall. A case history extensively documented in previous research and present in international symposiums was chosen for an analysis of construction process and excavation’s instrumentations, as well as emphasizing the importance of temporary works and construction sequence for deep excavation with cast in-situ diaphragm walls. In general, it is possible to conclude the main difficulty and uncertainty of the dimensioning are obtaining the soil parameter for diaphragm wall design. And, it is also possible to conclude the monitoring and execution control are paramount to the success of the diaphragm wall construction

Uma proposta de intervenção com atividade física individualizada na deficiência intelectual: um estudo de caso

The practice of regular physical activity has been considered a protective factor against the degenerative processes of the body, acting as a promoter of health, especially for risk groups such as obese and resistant groups exercise adherence as among the intellectually disabled (ID) . This study involved the administration of a training protocol and the physical parameters of longitudinal health in a subject about 43 years, intellectually deficient, hypertensive, obese and with a strong predisposition to develop diabetes and heart disease. The main objective of long-term program was to reduce body weight and normalize blood pressure (BP) after the student's physical activity and preferentially interfere with BP values at rest (ie before the daily schedule). The other objective was to improve general physical fitness. The protocol involved four meetings per week lasting one hour, in addition to participation in the program PROEFA (twice a week with sessions of one hour each), totaling 57 sessions spread over five months. The evaluation protocol included in each session the following tests: blood pressure measurements and heart rate, and amount of physical activity recorded via pedometer. Tests applied before and after the training included: anthropometric assessment, agility test, flexibility test, test drive through vertical and horizontal jumps and endurance to the test bench. The mass (kg) and BMI corresponded to the initial values of 127.7 kg and 42.05 kg m-2, and 5 months after 113.2 kg and 37.48 kg m-2, respectively. The waist-hip ratio was close to 1 after the intervention and this value corresponded to 0.98. For the test of agility (shuttle run) was not found improvement in performance. To test the values of the horizontal jump in pre-test were 52 cm and 56 cm post-test, vertical jump has been improved and...(Complete abstract click electronic access below)