Avaliação da auto-suficiência energética em reatores anaeróbios aplicados ao tratamento de resíduos da indústria de produção do etanol

Ethanol, the main automotive biofuel, has its production based on the fermentation of sugars found in biological materials and on the distillation of the alcoholic media formed during the fermentative process. Stillage is the main residue from ethanol production, containing a high organic loading in addition to acidic and corrosive characteristics. Considering the available technologies to treat stillage, we highlight anaerobic digestion, which allows the reduction of the impacts associated to pollutants loading of this effluent and the generation of energy from the methane gas produced in the process. Based on the high treatment efficiency usually associated to the anaerobic process, this work aimed to assess whether anaerobic systems applied to the treatment of stillage are energetically self-sufficient. First we evaluated the energy recovery capacity in an anaerobic reactor applied to the treatment of stillage resulting from corn-to-ethanol processing. The results indicated the great influence that a correct selection of electrical equipment and their respective operating periods have on the net energy balance of the anaerobic treatment. The high energy consumption of the heater would not allow the system to achieve a positive net energy balance – the maximum energy recovery would reach only 0.68% of the consumption. However, the replacement of the mixture equipment would result in energy gains ranging from 8.5 to 967.9% of the consumption. In this work we also assessed the efficiency of methane yields for a few studies and the correlation between some parameters of the anaerobic process. With respect to the methane yield, we noted that mesophilic systems tend to be more advantageous than the thermophilic ones (efficiency of 76.45 ± 22.51% vs. 69.40 ± 30.36%). Considering the study... (Complete abstract click electronic access below)

Combustão do hidrogênio em escoamento supersônico

This work investigated the operating conditions of a 'scramjet' through numerical simulation considering two-dimensional steady flow. Using a commercial software, FLUENT, cases of inviscid flow with and without fuel injection, turbulent flow without fuel injection, turbulent flow with fuel injection and without burning, and finally turbulent flow with fuel injection and burning are simulated

Avaliação da auto-suficiência energética de reatores anaeróbios no tratamento de esgoto sanitário e água cinza

The anaerobic treatment of sewage is widely employed in Brazil and it is an appreciated way for the treatment of effluents, helping to reduce the environmental impact in rivers. The methane gas obtained from the process can be applied to improve the energetic efficiency of the system, reducing the amount of waste and the cost of the treatment process. This work presents the net energy balance of anaerobic reactors applied to the treatment of sewage. The analysis was performed considering full-scale and laboratory-scale treatment systems. In laboratory scale, the results from three kinds of systems were compared regarding the biological treatment of greywater. Two of them (UASB7 and UASB12) were anaerobic and the other one was a combined anaerobic-aerobic system (UASB7/SBR6). Greywater methanization (compared to theoretical maximum) was calculated considering 100% removal (g BOD/day), the literature percentage removal and the anionic surfactant presence in the effluentt. For each of these three cases, the efficiencies were, respectively, 16.9%, 43.6% and 51.3% in UASB7 reactor, 25.6%, 50.3% and 59.2% in UASB12 reactor and 30.6%, 61.2% and 71.9% in UASB7/SBR6 reactor. The energetic potential was found to be 4.66x10-4, 7.77x10-4 and 5.12x10-4 kWh/L for the UASB7, UASB12 and UASB7/SBR6 reactors, respectively. The pumping system, the aeration (in the anaerobic-aerobic system) and the temperature controlled heating system were considered to calculate the energetic consumption. However, the third one was not employed since tropical regions like Brazil do not need heating systems and also because of its high energetic consumption. The calculated net energy balance in the reactors was negative in the case of greywater, respectively -0.16, -0.28 and -0.18 kWh/L for the reactors UASB7, UASB12 and UASB7/SRB6. In full scale (ETE Jardim das Flores - Rio Claro, SP), the average energy... (Complete abstract click electronic access below)

Projeto de um sistema anaeróbico para estabilização de lodo e recuperação de energia

The treatment of domestic and industrial effluents through Wastewater Treatment Plants (WTPs) generates a residue termed sewage sludge, rich in organic matter, high-volume, occasionally containing pathogens and heavy metals. The sludge generation can minimize the benefits brought by the treatment of sewage, because this residue does not always receive appropriate treatment before final disposal. The disposal is another problem related to sludge. Landfills generally does not have physical space and alternatives such as the use in agriculture requires an intense treatment that could be in many cases operational or economic unfeasible. The objective of this work is the theoretical research about the processes of stabilization of the sludge by anaerobic digestion and the methanogenic activity during the process. Through analysis of each step and contemplating each relevant factor in anaerobic digestion process in order to optimize them, we proposed a theoretical model of reactors capable of stabilize the sludge, reduce its volume and eliminate pathogens. The obtained configuration consists of two anaerobic reactors connected in series. The first one operates in the range mesophilic temperature (35 ° C) and has higher hydraulic retention time (25 days) working primarily in the stabilization of organic matter present in the sludge and producing biogas, whereas the second one operates in the thermophilic range (55 ° C) in order to eliminate pathogens, and to reduce the volume. The hydraulic retention time in the second reactor is lower (10 days). Both mesophilic and thermophilic processes were efficient in what was proposed, promoting the stabilization of organic matter present in the sludge and significant reduction of pathogens. As a final step with the sludge previously digested, it is indicated a final dehydration... (Complete abstract click electronic access below)

Tratamento da superfície do alumínio via eletrólise a plasma

This paper presents the study on the application of the electrolytic plasma for surface treatment of aluminum. A bibliographical study on the material of interest was preliminarily performed and later designed and built an electrolytic cell, including the excitation source. Unlike conventional electrolysis process, the plasma assisted carry on in the non-linear region of characteristic current/voltage curve. Therefore it requires for the on set of the process that the power supply operates on harder conditions than those on high current process. The plasma produced during the present investigation has temperatures in the range o 6,0.10 3 -7,0 .10 3 K, well above those found in conventional chemical process. It also shows a particular dynamic to promote changes on surface and to produce new materials. The plasma is generated by microdischarge in vapor or gas bubbles involved in physic-chemical processes in electrode regions of the electrolytic cell. The electrode material was the aluminum (7075). The Process Electrolytic Plasma Processing (EPP) is sensitive to various parameters such as operating voltage, current density, electrolyte, concentration of electrolyte, geometry of reactor, temperature of electrolytic solution and dynamic of the fluid in the cell. The experiments were carried on in order to find parameters for a stable abd steady operation. The choice for the electrolytic was silicate/alkali solution in various concentrations to operate in various voltage as well. Plasma was produced on negative (cathode) and positive (anode) electrode, in specific conditions. A stable operation on the cathode process was obtained with low concentration of the electrolytic in aqueous solution, current density around 250V effective voltage. For the evolution of plasma in anodic process it was required higher concentrations and higher... (Complete abstract click electronic access below)

Produção de L(+)-ácido lático por lactobacillus rhamnosus através de batelada alimentada

O Ácido Lático é um ácido orgânico que possui uma ampla gama de aplicações nas indústrias farmacêuticas, químicas e de alimentos. Ultimamente ele tem sido considerado promissor como bloco na construção de polímeros biodegradáveis (PLA), os quais podem ser usados na produção de plásticos biodegradáveis como embalagens de alimentos e utensílios plásticos e assim substituir os produtos derivados do petróleo. O Ácido Lático pode ser produzido tanto por síntese química como através da fermentação por micro-organismos. As bactérias que produzem ácido lático são chamadas de bactérias láticas e podem produzir D-(-)-ácido lático puro, L-(+)-ácido lático puro ou uma mistura racêmica dos dois isômeros. A produção de somente um dos isômeros puro é uma grande vantagem de se produzir Ácido Lático por fermentação, uma vez que uma mistura racêmica é produzida via síntese química, além disso, a produção a partir da fermentação é mais econômica. Assim, vários estudos estão sendo feitos com o objetivo de se baratear o processo de fermentação lática e de se aperfeiçoar este processo. Este estudo visa à avaliação da produção de L-(+)-ácido lático por Lactobacillus rhamnosus B103 em reator pela utilização de batelada alimentada, uma vez que este processo tem se mostrado o mais eficiente em diversos estudos. Existem vários tipos de alimentação: batelada alimentada por pulso, batelada alimentada por fluxo constante, batelada alimentada com controle por pH stat. Neste presente estudo foram avaliados além do processo de batelada, vários processos de batelada alimentada, como a batelada alimentada com controle por pH stat, batelada alimentada por pulso e batelada alimentada por fluxo constante. O processo de batelada alimentada por fluxo constante foi no qual se obteve a maior concentração final de ácido lático (149,8 g L-1), mas, a melhor... (Resumo completo, clicar acesso eletrônico abaixo)

Avaliação de Desempenho de Aplicações Paralelas Utilizando MPI e PETSc

This work presents a study about the use of standards and directions on parallel programming in distributed systems, using the MPI standard and PETSc toolkit, performing an analysis of their performances over certain mathematic operations involving matrices. The concepts are used to develop applications to solve problems involving Principal Components Analysis (PCA), which are executed in a Beowulf cluster. The results are compared to the ones of an analogous application with sequencial execution, and then it is analized if there was any performance boost on the parallel application

Compostagem dos Resíduos da FCT/UNESP de Presidente Prudente –SP

The present work aimed to study the composting process using two methods of treatment, conventional and mechanized for the treatment of pruning/weeding waste and organic waste generated in the canteens of the FCT/UNESP. For this work, it was quantified the generation of the waste However, of the tests with pure organic compound, which had the best result was T1 - 70% RPC / 30% ROC, again indicating the feasibility of applying this condition in scales at the campus. The conventional treatment by composting was carried out on manual aerated piles: 70% residue pruning/weeding (RPC) and 30% organic waste from the canteen (ROC); 50% RPC / 50% ROC, 30% RPC / 70% ROC. The mechanized system consisted of a reactor of 190 liters – 50% RPC / 50% ROC, with air injection from a compressor for 15 minutes daily. The parameters characterized and monitored were pH, organic matter, organic carbon, ash, nitrogen kjedahl and phosphorus. The temperature measurements were taken daily by a digital thermocouple (top, middle and base of the piles and reactor)... (Completo abstract click electronic access below)

Avaliação da auto-suficiência energética de reatores anaeróbios no tratamento de esgoto sanitário e de água preta

The purpose of this project is to verify whether anaerobic reactors applied to sewage treatment are energetically self-sufficient. This evaluation can be made by balancing the methane produced through the anaerobic transformation stages (hydrolysis, acidogenesis, acetogenesis and methanogenesis) and the reactor energy consumption requirements. The original project included methanogenic activity tests, which could not be performed due to setbacks in the installation of an analytical instrument. Scientific articles about bench- and full-scale anaerobic reactors were investigated instead. An average substrate-to-methane conversion efficiency of 58,2±18,6% was found for the bench-scale reactors and higher efficiencies (89,2%) were found for the cases which had higher Organic Loading Rates (OLRs) values. The average energy output was 0,013 kWh/Lsewage, value unable to meet the energy needs for the reactor operation, considering equipments normally used such as temperature controller. This balance can become positive if few hypotheses are made, for example (i) to eliminate the use of temperature controller (ii) to alter the operation pattern from continuous to intermittent. Based on energy balance assessment of eight bench-scale reactors, it was observed that the implementation of a system for biogas utilization is not energetically feasible. However, interesting results were found for a full-scale sewage treatment plant, ETE Ouro Verde – Foz do Iguaçu, PR, Brazil. Even though its substrate-tomethane conversion efficiency was about 10% only, the energy balance was quite positive, with energy consumption of 68 kWh/month and energy production of 660 kWh/month. This analysis leads us to conclude that energy recovery from full-scale sewage treatment plants should be practiced by other plants

Confecção e caracterização de filmes finos de boro para a medida da taxa de reação 10B(N, a)7LI na terapia por captura de nêutrons pelo boro

The Boron Neutron Capture Therapy (BNCT), based on the 10B(n,α)7Li reaction, represents a promising modality for the treatment of cancers that are resistents to conventional treatments. So, it is necessary to find drugs (boron compounds) with high selectivity for each type of cancer, the neutrons source should be well characterized and the rate of 10B(n,α)7Li reaction should be measured with great accuracy as possible. This study aimed to develop a method for manufacturing thin films of boron, for measure the 10B(n,α)7Li reaction, and analyze the uniformity of the films. Five thin films of boron were manufactured with three different concentrations of boric acid, heated to transform the acid in boron, irradiated with thermic neutrons coupled to CR-39 detectors, in BNCT line at the reactor IEA-R1 IPEN/CNEN, São Paulo. After the irradiation, the detectors were chemically attacked with NaOH to reveal the tracks. The methodology presented is effective because it resulted in deposition of boron as thin film enabling the quantitative analysis of 10B(n,α)7Li reaction. The analysis of the uniformity of density of the induced tracks in CR-39 shows that, in most of the films, there is no uniformity in surface distribution of boron, but when the film is divided, we obtain some uniform sectors

Remoção de N-amoniacal em baixas concentrações de oxigênio dissolvido a partir do efluente de frigorífico bovino

This work aimed to develop a biological system for removal of ammonia nitrogen operating at low concentrations of dissolved oxygen. Thus, a biological upflow vertical reactor was built, in which the affluent pass through the support media until the top. Sludge from an anaerobic stabilization pond of a slaughterhouse unit in the city of Presidente Prudente - SP was used as inoculum. Initially the system operated in batch and afterwards in a continuous flow with different HRT. For feeding the reactor, an initial phases was adopted a synthetic culture media, described by Martins (2007), in order to establish the ideal conditions for the development of Anammox bacteria and subsequently, submitted to the system a slugde effluent of slaughterhouse. The results showed significant removal efficiency of N-NH4+, especially in the phase without recirculation of culture media, with an average of 71% removal, with the proportion of removal of N-NH4 +:N-NO2- average 1: 1,69. For the period of operation with effluent from the slaughterhouse, were not obtained satisfactory results, without confirmation of the proliferation of Anammox bacteria in the system, due to the high presences of organic matter in the same confirmed by high concentrations of COD

Coroa da terra: a poesia como (re)criação do mundo

This monograph is aimed at reflecting the internal structure of the book Coroa da Terra (1946), the Portuguese poet Jorge de Sena (1919-1978), investigating for this, the guiding criteria for the ordering of poems. Starting from a question posed by an author paratext, we considered the possibility that the book is constituted as a unit of poetic path, in which each poem comprises a stretch of the pilgrimage undertaken by the poet toward the crown of the Earth. Moreover, from the epigraph of the book and the Preface (1960) of 1st edition of Poesia I (1961), we consider the idea that the Coroa da Terra is a search for truth, or even that the pilgrimage made by the poet is on the trail of a poetic word conscious and therefore ethically responsible. This search would set the poetic language of testimony, from which derive two other important vectors for the exegesis of poetry seniana: metamorphosis and pilgrimage. Upholding the unity of the book would be the language in dialectical flow as a formal procedure, which enables the poet be an expression in constant motion. To check the validity of our hypothesis, we conducted an analysis of four poems in sequential order (―Purgatório‖, ―Suma Teológica‖, ―Os trabalhos e os dias‖, ―Espiral‖). To them, it was added to analyze the poem ―Metamorfose‖, poem 23rd of the Coroa da Terra, which acted as a reference point and as close to the research by presenting a character's thought seniano synthesis. It was found that the idea of unity is sustained when we consider Coroa da Terra as a journey of formative poetic direction

Chave de identificação interativa de múltiplas entradas para espécies da família Lauraceae da Reserva Natural Vale, Linhares - ES

Foi elaborada uma chave interativa de múltiplas entradas para a identificação de 50 espécies da Família Lauraceae presentes na Reserva Natural Vale, Linhares-ES. Desenvolvida a partir da versão livre do Programa Lucid® 3.3, apresenta caracteres botânicos de marcação livre e não sequencial, que elimina as espécies as quais não atendem aos critérios selecionados até a identificação do material. Para tanto foi confeccionada uma matriz de caracteres relacionados aos táxons. Foram incluídas ilustrações no final do trabalho já que a versão utilizada do programa compromete a resolução dessas na própria chave. Há uma cópia da chave com o instalador do programa e instruções para uso no CD-ROM entregue junto com o trabalho. Futuramente estará hospedada no site do programa. A versão apresentada no trabalho é preliminar e será concluída posteriormente com a versão paga do programa. A utilização das chaves interativas facilita e dinamiza o processo de identificação dos táxons, contribuindo para a difusão do conhecimento biológico e de programas voltados ao reconhecimento e conservação da biota

Simulação geoestatística e classificação numérica para o delineamento de unidade de mapeamento de atributos e erosão do solo

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Fermentação metanogênica mesofílica de melaço e termofílica de vinhaça em reatores UASB

Pós-graduação em Microbiologia Agropecuária - FCAV