Avaliação tardia da função renal em doentes com paracoccidioidomicose tratados com anfotericina B por meio da determinação do ritmo de filtração glomerular com EDTA Cr51

A late survey of the renal function was performed in eighteen patients with paracoccidioidomycosis treated with amphotericin B, according to the glomerular filtration rate (RFG). The method was compartment analysis by single injection using EDTA Cr51, determined by its 'half biological life' and dosages of blood urea nitrogen and creatinine. The patients were seventeen males and one female. They were from 22 to 76 years old. Ten of these patients received 2 g of amphotericin B and eight of them received 4 g. There were no expressive difference between the two groups, taking into account age, dose in mg/kg of weight/day, time of conclusion of the treatment, urea, creatinine, glomerular filtration was smaller than the normal, and average of the half biological life of the EDTA Cr51 was large than the normal. The achieved results permitted us to consider that the amphotericin B determines deficit of renal function. However, by the present study, it hasn't been possible to affirm if the modifications are definitive.

Evolução do peso corporal e desenvolvimento da mandíbula de ratos em função da administração de flúor.

The body weights evolution and the development of mandible were analyzed in rats that received 0.25 mg F contained into a commercial product, during 30 and 60 days consecutively, beginning at birth. The study presented the following conclusions: 1. The treated animals showed body weights always inferior to the controls, with more evident difference at 60 days period; 2. Analysis showed a reduction in the horizontal linear measurements, but not in the length of the mandibular diastem. No influence was observed in relation to the verticals.

Rugosidade superficial de ligas com alto conteúdo de cobre, em função do aquecimento acima da temperatura de fusão.

Being the surface roughness a fundamental property in the fit of the castings, it was determined the roughness of 5 high-copper casting alloys, according to the heating over their melting temperature. That way, the specimens made with smooth plastic in the shape of a rectangular plate, 2 mm x 7 mm x 11 mm were invested into a cristobalite investment. After heating and elimination on the plastic, the molds were filled by 3 g of molten alloy, casted in a electrical casting machine at the casting temperature at 25 degrees C and 50 degrees C overheating. The surface roughness was measured in a roughness analyser, Talysurf. As a result, it was verified that there is a variation of surface roughness among the alloys tested, and the heating of the alloys until 50 degrees C over the melting temperature does not interfere in the roughness.

Determinação de dureza de ligas de cobre, na forma como são recebidas e após a fundição, em função das técnicas de fusão.

It was evaluated the Vickers hardness of five high-copper casting alloys, in their original package form and after casting, according to the casting method used. That way, ten ingots, supplied by the manufacturers of each alloy, were included in self-curing acrylic resin, polished, numerated and submitted to Vickers hardness test at load of 200 g during 30 seconds. Afterwards the numerated ingots were removed from the acrylic resin and five of those were cast in an electrical casting machine and the other five in a centrifugal casting machine with an air/gas torch. The specimens obtained were included in self-curing acrylic resin, polished and submitted to Vickers hardness test. As a result it was verified that there is a variation of hardness among the alloys tested, and the use of the electrical casting machine produced lower hardness values than those produced when used the centrifugal casting machine with an air/gas torch. Also, there is a decrease of hardness of the cast alloys when they are tested in their original form and after casting.

Resinas para facetas estéticas de próteses fixas. III. Análise conjunta das variáveis alteração dimensional e alteração de peso em função de materiais, condição de armazenamento e tempos.

The authors analysed the simultaneous effects of the dimensional and weight alteration of resins utilized for esthetic facets submitted to warehousing conditions and periods of time. The resins showed different behaviour and a neat correlation between dimensional alteration and weight. The condition of immersion promoted dimensional alteration 50% lower and an alteration of weight three times higher.

Incontinentia pigmenti (Bloch-Sulzberger syndrome): a case report.

A syndrome--incontinentia pigmenti--of probable genetic etiology, is discussed and a new case report presented. The syndrome presents systemic and dental manifestations, which are separate although similar to those found in other disease entities, i.e., congenital syphilis, hereditary ectodermal dysplasia.

Histochemical study of muscle fiber types in Synbranchus marmoratus Bloch, 1795

The myotomal muscle of Synbranchus marmoratus was investigated using histochemical and immunohistochemical reactions. This musculature is composed of a superficial red compartment, uniformly distributed around the trunk circumferentially and also in the lateral line. The red compartment fibers are small in diameter and have an oxidative metabolism, a high rate of glycogen and a negative reaction to alkaline and acid myofibrillar ATPase (mATPase). The white muscle forms the bulk of the muscle mass. Its fibers are large in diameter and have a glycolytic metabolism, a negative reaction to glycogen, a strong reaction to alkaline mATPase and a negative reaction to acid mATPase. Between these two compartments there is an intermediate layer of fibers presenting a mosaic metabolism pattern with a high rate of glycogen. These fibers stained moderately for alkaline and acid m-ATPase. Several clusters of red muscles were observed inside the white muscle. Each cluster is composed of three fiber types, with a predominance of red and intermediate fibers. Reactivity to anti-MHC BA-D5 was positive only in the intermediate fibers. Reactivity to anti-MHC SC-71 was negative in all fiber types.

Qualidade fisiológica de sementes de pepino cv. pérola, em função da idade e do tempo de repouso pós-colheita dos frutos

This work was carried out at the Fazenda Experimental Lageado, at Botucatu, SP, to evaluate the physiological quality of cucumber (Cucumis sativus L.), seeds harvested at different fruit maturity stages and post-harvest resting periods. Fruits of cultivar Pérola were harvested at 6 ages (20, 25, 30, 35, 40 and 45 days after anthesis) and they were stored at room temperature for 0, 5, 10 or 15 days before seed extraction. After this, seeds were fermented for 2 days, washed and dried. External visual characteristics of fruits and seeds were observed at harvest. Seed quality was evaluated as for moisture, dry matter content, dimensions, germination, and vigour. Results showed that seed germination and vigour increased in fruits aging from 20 to 40 days. Post-harvest periods improved seed quality of 20-day old fruits not reaching the seed quality levels observed in 40 or 45-day old fruits, without post-harvest resting period. Seeds from fruits at 25, 30 and 35 days of age, with 10 or 15 days of post-harvest resting period reached the same quality levels of seeds from fruits with 40-45 days old.

Produção de alfafa em função de espaçamentos e densidades

An experiment was conducted to study alfalfa (Medicago sativa L.) yields as affected by row spacings of 15, 20, 30 and 40 cm and plant densities originated from 10, 15, 20 and 30 kg/ha of seeds. The experiment was conducted on a Typic Eutrortox (Clay) in Bandeirantes, state of Paraná, Brazil. The experimetal design was a 4 × 4 factorial in randomized triplicated blocks. There was no significant effect of row spacings and plant populations on plant height and dry matter production. The 15 cm row spacing showed higher number of stems throughout the two years of the experiment. Up to the 6th cut the plant density of 30 kg/ha also lead to a higher number of stems/ha.

Variação da massa específica da madeira de Eucalyptus grandis aos 8 anos de idade em função de diferentes níveis de produtividade

It were analyzed Eucalyptus grandis trees of 8 years old in the forest group of Duraflora S/A, with different annual increments based on volume, to the related studies of specific gravity values based on productivity indexes. The methodology used in analysis of specific gravity was the gamma-ray attenuation technique of Americium-241. The Eucalyptus grandis showed a specific gravity decreasing with the increasing of parcel productivity. For a gain of 3,5 m3 in productivity there was a decreasing of 1% in specific gravity. Nevertheless, it was not observed correlation between specific gravity and basal area in a same parcel. The present work stands out too, some of the difficulties found with relation to wood specific gravity determinations and emphasize the importance of take samples in the form of full rounded plates in three or four relative positions in the tree.

Matéria seca, concentração e acúmulo de nutrientes em mudas de Eucalyptus grandis em função da idade

E grandis seedlings of Bofete progeny, cultivated in nurseries of Eucatex Florestal, were collected at ages of 55, 69, 83, and 97 days, separated into leaves, stem, and roots. The seedlings were then placed in identified paper bags, and oven-dried until weight became constant. They were then weighed and chemically analyzed for the determinate of dry matter production, concentrations and accumulation of N, P, K, Ca, Mg, S, B, Cu, Fe, Mn, and Zn in the several seedling ages. The distribution of total dry matter weight complied with the following descending order: leaf > stem > roots. Conversely to expectations, the highest concentrations of nutrients occurred in leaves for N and Mn only. Seedling hardened process resulted in N and S deficiency. The sequence of macronutrient concentration in seedlings at the time of shipment was the following: leaf > root > stem for N; root = stem > leaf for P; leaf = root = stem for K; stem > root > leaf for Ca; root > leaf > stem for Mg and S. All macronutrient concentrations in organs decreased with age, except for Ca. Concentrations of Cu, Fe, and Zn in all seedling specimens decreased with age. The sequence of micronutrient concentrations in seedling specimens at the time of shipment was the following: root >stem = leaf for B; root > stem > leaf for Cu and Fe; root > leaf > stem for Zn, and leaf > stem > root for Mn. At the time of shipment, at 97 days of age, K was the most extracted macronutrient of all, followed in a descending order by Ca, N, Mg, P, and e S. At the end of the seedling production rotation, Mn was the most extracted micronutrient, followed by Fe, Zn, Cu, and B.

Desenvolvimento e produtividade da cúrcuma (Curcuma longa L.) em função de doses de nitrogênio e potássio

The objective of the experiment was evaluating the development and production of turmeric, it was carried out at FCAV-UNESP, in Jaboticabal-SP, during 11/18/ 1999 to 7/18/2000, in randomized blocks, with three replications, factorial scheme 5 × 5. The factors evaluated were doses of N (0, 68, 136, 170 and 204 kg.ha-1) and doses of K2O (0, 92, 184, 230 and 276 kg.ha-1). The potassium doses influenced plant-mother's height significantly, answering lineally to the increment in the potassium fertilization. There was significant interaction between nitrogen and potassium on the number of leaves of the sons and total-plant. In the doses of 0 and 92 kg of K2O.ha-1 a lineal increase was observed in the number of leaves with the increment of the applied nitrogen. The potassium doses also influenced the foliar area of the sons and total-plant, reaching values of 3260 and 4971 cm2 per plant, respectively, for the application of 276 kg K2O.ha1. The number of sons had a lineal increment with the growing fertilization of potassium, contemplating on the dry mass of the aerial part of the sons. The production of rhizomes per plant wasn't influenced for the factors evaluated.

Efeitos do extrato aquoso de cebola (Allium cepa L.) sobre a função renal e a pressão arterial em ratos Wistar

The vegetal species, Allium cepa, known as onion, is widely used in the folk medicine as diuretic, besides it has been used on the bronchitis, cough, cardiovascular diseases and hypertension treatment. In this study we evaluate the onion aqueous extract (AE) effect on water flow and electrolytes in anesthetized Wistar rats, besides we also evaluate arterial pressure alterations. Two groups were studied: Group 1 (control) - oral tratment with 1.0 mL of distilled water, and Group 2 (experimental) - oral treatment with 1.0 mL of AE 20%. The rats were anesthetized and we canulate the trachea, left carotide artery (for arterial pressure measurement and blood collecting), jugular vein (to execute inulin perfusion - to register glomerular filtration), and urinary bladder (to collect urine). The Group 1 results had shown that the animals had not presented significant alterations (p>0.05) in the analyzed parameters. The animals of Group 2 had a significant reduction (p<0.05) in the arterial pressure (22.0%). However, there were not significant alterations in renal parameters (p>0.05). These results show that the treatment with the AE lead a hypotensor effect in anesthetized Wistar rats, but not followed by renal parameters alterations.

Teores de nutrientes na folha e nos grãos de aveia-preta em função da adubação com fósforo e potássio

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Precisão de plantas planialtimétricas em função do posicionamento de pontos em irradiadas de campo

The present experiment aimed to study the influence of point positioning in an irradiated field to produce a planialtimetric plant. A planialtimetric evaluation was carried out in a 14-acre experimental area with well-defined topographic variations. Planialtimetric maps were designed using manual procedures, Datageosis and Topoesalq. Datageosis built all the curves after numerical surface modeling. Topoesalq provided only height reports and the drawing of curves was done manually. The third method was a manual procedure. Because there were planialtimetry representation differences, longitudinal profiles were used in the sites where there was a great divergence among plants. When obtained profiles and plants were compared, it was verified that the one produced by Datageosis represented the relief plant better. Later, only the irradiated field points were evaluated and each point presented positioned readings before and after each relief map variation. The processing through the three methods resulted in significant plants of the local planialtimetry, according to the control profiles. It was concluded that the planning of the field procedure should be suitable to the posterior treatment method of obtained data in order to make a planialtimetric plant to accord to the evaluated local topography.