Modelagem molecular aplicada ao desenvolvimento de moléculas com atividade antioxidante visando ao uso cosmético

Some hypotheses and constants studies are made with intention to elucidate the aging process. To prevent and to attenuate the cutaneous aging it becomes necessary to strengthen our endogenous antioxidant natural defenses. Diverse exogenous antioxidant substances, as vitamins, vegetal extracts and others, have been used by the Cosmetology in antiaging products. The objective of this paper is to show how the Molecular Modeling can be an useful tool in the research for new antioxidant cosmetic substances to face the cutaneous aging.

Genetic divergence in sesame based on morphological and agronomic traits

The evaluation of diversity in germplasm collections is important for both plant breeders and germplasm curators to optimize the use of the variability available. Diversity can be estimated by different genetic markers. The purpose of this study was to estimate the genetic divergence of 30 morphological and agronomic traits in 108 sesame genotypes by multivariate analysis. The Cole-Rodgers index was used to establish the dissimilarity matrices. The principal component analysis identified the traits that contributed most to the divergence and the genotypes were clustered by Tocher's optimization. Despite the narrow genetic basis, the markers were efficient to characterize the genotypes and identify the most similar groups or duplicate and divergent genotypes. Greatest variation was found for the traits number of capsules per plant and grain yield.

Influência das propriedades de granulados de lactose nas características físicas dos comprimidos

The compaction behavior of powdered solids used in tablets can be dominated by the physical-chemical properties of the excipients because, frequently, they are present in much larger amounts than the drug in tablet formulation. The aim of this study was to evaluate the influence of the size of lactose granules on the physical characteristics of tablets produced in punches of various diameters, since this relation has not been explored in the literature. Granules were produced in several sizes by wet granulation and compressed in punches of different diameters by applying different forces. Size distribution, apparent density and flow of granules were evaluated, as well as the physical characteristics of the tablets (weight, friability, hardness and disintegration time). The results indicate that in situations where excipient characteristics predominate due to low drug content, as in the 7 mm punch, the selection of granule size is important for the mechanical strength of tablet. On the other hand, with the 9, 11 and 13mm punches, it was possible to produce strong tablet from all sizes of granules.

Acúmulo de sacarose, produtividade e florescimento de cana-de-açúcar sob reguladores vegetais

Plant regulators have been used successfully for early ripening and flowering control in sugarcane (Saccharum spp. Hybrid). However, little information is available about the interactions between new genotypes and two plant regulators with regard to those variables. This study determined the effect of the regulators on the sucrose content, stalk production and flowering of seven sugarcane genotypes. The experiment was installed in March 2004 near Ja-, SP, Brazil A randomized complete block design was used with four blocks with a split plot treatment arrangement where the main plots were the genotypes IAC87-3396, IAC87-3410, IAC89-3124, IAC91-2195, 1AC91-5155, P088-62 and SP80-1842 and the subplots were sulfomethuron-methyl (15g i.a.·ha -1), etefon (480g i.a.·ha-1) and unsprayed control. Pol in cane was evaluated at 0, 21, 42, 63, 84, 105 and 126 days after the plant regulators application (DAA). Flowering, pith, stalk production and sucrose content were evaluated at 126 DAA. In most of the genotypes the use of plant regulators anticipated maturation in 21 days when compared with the unsprayed control. Etefon was more efficient for harvesting sugarcane between 42-84 DAA, whereas sulfomethuron-methyl was between 105 and 126 DDA. Both products controlled flowering. For most genotypes, the ripeners did not affect the productivity of stalks, except for sulfomethuron-methyl that reduced it in SP80-1842, and for ethephon that increased it in IAC91-2195. Sugar productivity of IAC89-3124 increased with both regulators, while it was higher in IAC91-2195 with ethephon application and lower in SP80-1842 with sulfomethuron-methyl use.

Cursos de geologia: expansão, interiorização e consolidação do ensino de geologia no brasil

A short time after the creation of the first Geology courses in Brazil (in 1957 with the pioneers in the University of São Paulo and in the Federal Universities of Ouro Preto, Pernambuco and Rio Grande do Sul, and then in the following year in the Federal Universities of Bahia and Rio de Janeiro), there arose other initiatives that spread almost twenty Geology courses throughout Brazil. In addition to expanding the Geology teaching in the South, Southeast and Northeast regions, these initiatives succeeded in allowing access to geological education for the population in the North and Central-west of Brazil. In the 1960s, the courses in the Federal University of Para in Belém (1964), University of Brasilia (1965) and São Paulo State University in Rio Claro (1969) were implanted. In the following decade, the courses in the Federal Rural University of Rio de Janeiro in Seropédica (1970), the Federal University of Ceará in Fortaleza (1970), the University of Rio dos Sinos in São Leopoldo (1973), the Federal University of Paraná in Curitiba (1973), the Federal University of Minas Gerais in Belo Horizonte (1973), the Federal University of Amazonas in Manaus (1976), the Federal University of Mato Grosso in Cuiabá (1976), the Federal University of Rio Grande do Norte in Natal (1976), and the State University of Rio de Janeiro in Rio de Janeiro (1977) were all created. At the close of the twentieth century, the course was implanted in the State University of Campinas (1998). Now, at the beginning of the twenty-first century, new Geology courses are being implanted, accentuating the movement inland of Geology teaching in Brazil. The Federal University of Pará began a new course in its campus in Marabá in the south-east of Pará and the Federal University of Bahia implanted a new course in its campus in Barreiras in the west of Bahia. Finally, the Federal Universities of Sergipe, Espírito Santo and Roraima commenced Geology courses in Aracaju, Alegre and Boa Vista, respectively. This chapter will present the synthesis of the Geology courses which, over the last decades of the twentieth century, contributed to the expansion of Geology teaching in the country, taking it to every region and giving opportunities to a large number of Brazilian citizens to realize their dreams and tread the paths of their professional vocation.

Influência das propriedades de granulados de celulose nas características físicas dos comprimidos

The compaction behavior of powdered solids can be strongly influenced by the physicochemical properties of excipients because they are frequently present in the tablet in larger amounts than the drug itself. The aim of this study was to assess the influence of the granule size of the cellulose on the physical characteristics of tablets produced in punches of different diameters, since this relation has never been explored in the literature. Granules of several sizes were produced by wet granulation and compressed in punches of various diameters by applying different forces. Size distribution, apparent density and flow of granules were assessed, as well as physical characteristics of the tablets (weight, hardness, friability and disintegration time). Reducing the granule size resulted in tablets of adequate crushing strength and fast disintegration; moreover, it allowed tablets to be produced without the need to use forces near the upper limit of the press, thus avoiding premature wear on the tabletting machine. Thus, once a suitable size for a given tablet formulation has been chosen, the granule size selected has been shown to determine the crushing strength of the tablet.

Development of a model to measure the efficiency of outsourced companies in the process of aircraft spare parts technical publications

This paper presents a proposal of a model to measure the efficiency of outsourced companies in the aeronautical industry applying the methods DEA and AHP. It also proposes an evaluation in the relation between the variables of the process and the value obtained for the effiiency. The criteria of Quality, Time and Cost were considered the outputs of the process, and those criteria were quantified by AHP for DEA matrix.The number of technical documents received by those outsorced companies were considered the input of the process. The other purpose is to separate the companies in groups considered able to receive an investment to improve their process. Copyright © 2008 SAE International.

Thermoplasticity of microseal and TC gutta-percha (Tanaka de Castro) and three gutta-percha cones

Aim: The aim of this study was to assess the thermoplasticity of materials used in root canal filling. Methods: Specimens with standardized dimensions were fabricated using Tanari, Roeko and Activ Point gutta-percha cones, as well as Microseal and TC gutta-percha. After 24 hours, the specimens were placed in water at 70 °C for 60 seconds and positioned between two glass slabs. Each set was compressed by a 5 g weight. Digital images of the specimens before and after compression were obtained and analyzed. The thermoplasticity was evaluated based on the difference between the final and initial areas. Data were statistically analyzed using ANOVA and Tukey's tests at a 5% significance level. Results: TC and Microseal gutta-percha presented the highest thermoplasticity (p < 0.05). Among the gutta-percha cones, Tanari and Roeko presented the highest thermoplasticity and differed when compared to Activ Point (p < 0.05). Conclusions: The results of the present study showed that TC and Microseal gutta-percha filling systems present better thermoplastic properties.

Measurement of the charge ratio of atmospheric muons with the CMS detector

We present a measurement of the ratio of positive to negative muon fluxes from cosmic ray interactions in the atmosphere, using data collected by the CMS detector both at ground level and in the underground experimental cavern at the CERN LHC. Muons were detected in the momentum range from 5 GeV/. c to 1 TeV/. c. The surface flux ratio is measured to be 1.2766±0.0032(stat.)±0.0032(syst.), independent of the muon momentum, below 100 GeV/. c. This is the most precise measurement to date. At higher momenta the data are consistent with an increase of the charge ratio, in agreement with cosmic ray shower models and compatible with previous measurements by deep-underground experiments. © 2010.

Measurement of the muon stopping power in lead tungstate

A large sample of cosmic ray events collected by the CMS detector is exploited to measure the specific energy loss of muons in the lead tungstate (PbWO4) of the electromagnetic calorimeter. The measurement spans a momentum range from 5 GeV/c to 1 TeV/c. The results are consistent with the expectations over the entire range. The calorimeter energy scale, set with 120 GeV/c electrons, is validated down to the sub-GeV region using energy deposits, of order 100 MeV, associated with low-momentum muons. The muon critical energy in PbWO4 is measured to be 160+5 -68 GeV, in agreement with expectations. This is the first experimental determination of muon critical energy. © 2010 IOP Publishing Ltd and SISSA.

Commissioning of the CMS experiment and the cosmic run at four tesla

The CMS Collaboration conducted a month-long data-taking exercise known as the Cosmic Run At Four Tesla in late 2008 in order to complete the commissioning of the experiment for extended operation. The operational lessons resulting from this exercise were addressed in the subsequent shutdown to better prepare CMS for LHC beams in 2009. The cosmic data collected have been invaluable to study the performance of the detectors, to commission the alignment and calibration techniques, and to make several cosmic ray measurements. The experimental setup, conditions, and principal achievements from this data-taking exercise are described along with a review of the preceding integration activities. © 2010 IOP Publishing Ltd and SISSA.

Performance of the CMS Level-1 trigger during commissioning with cosmic ray muons and LHC beams

The CMS Level-1 trigger was used to select cosmic ray muons and LHC beam events during data-taking runs in 2008, and to estimate the level of detector noise. This paper describes the trigger components used, the algorithms that were executed, and the trigger synchronisation. Using data from extended cosmic ray runs, the muon, electron/photon, and jet triggers have been validated, and their performance evaluated. Efficiencies were found to be high, resolutions were found to be good, and rates as expected. © 2010 IOP Publishing Ltd and SISSA.

Performance of the CMS drift-tube chamber local trigger with cosmic rays

The performance of the Local Trigger based on the drift-tube system of the CMS experiment has been studied using muons from cosmic ray events collected during the commissioning of the detector in 2008. The properties of the system are extensively tested and compared with the simulation. The effect of the random arrival time of the cosmic rays on the trigger performance is reported, and the results are compared with the design expectations for proton-proton collisions and with previous measurements obtained with muon beams. © 2010 IOP Publishing Ltd and SISSA.