Avaliação de funcionamento das bombas hidráulicas do sistema de tratamento de efluentes da Empresa Parker Hannifin

On the field of the projects of hydraulic systems exists a lot of worries when we talk about the calculate of hydraulic pumps. In this case some facts must be considerate: length of tubes, fluid characteristics, height gauge, temperature, pressure, characteristics of tubes, flow required and others. For that mathematic calculates must be developed with the objective to optimize hydraulic pumps and agree to find an ideal machine (that don't requires more energy than necessary or less energy than it requires; that is the more critical case, cause exists the risk that the fluid pumped do not agree to become in your destiny). The wrong calculate of this machine can super-size its, bringing an excessive energy consumption. Actually it's an important subject because we are in the age of lack of energy what turn it more expensive. So the correct sizing of a hydraulic pump is connected with the fact that you have to uses the enough energy resources avoiding waste. The calculate of ideal pump in the pumping system is studied during years and a lot of specialists in this subject develop equations and theories to calculate its. Some researches study about this subject and all of them become to the same conclusion: to find the ideal pump we have to know the characteristics of fluid (cinematic viscosity), the required flow , overall yield (overall of motor x overall of pump) the high gauge or discharge pressure and the loss of repression. The pressure drop can be calculated with different theories: using Hazen-Williams, Darcy e Weisbach or Chézy (1775 - that starts the researches to calculate the pressure drop). Although the most used theory and what is most near to reality is the Darcy's equation. So, in this job the Darcy's equation were choice to calculate the drop pressure that consider what kind of flow we are studying: laminar or turbulent. The determination of the best pump to be used in the ... ( complete abstract click eletronic access below)

A influência das características morfométricas e de uso da terra na morfodinâmica: um estudo da alta bacia do Rio Itanhaém - Baixada Santista/SP

Diante do desenfreado uso da terra, gerando impactos muitas vezes irreversíveis, o planejamento ambiental insere-se como uma ferramenta atualmente necessária. Visto que é sob o relevo que se consolidam as atividades antrópicas, a cartografia do relevo surge como um importante instrumento, indicando setores cujas características naturais impõem limites ao uso da terra. Assim, o objetivo desta pesquisa é analisar as características geomorfológicas da alta bacia do Rio Itanhaém, com ênfase à questão morfográfica e morfométrica do relevo, avaliando também as modificações impostas a este em decorrência do uso da terra, contribuindo, portanto, com a gestão ambiental desta área. Para tanto, foram elaborados documentos cartográficos capazes de evidenciar as características do relevo que impõem limites ao uso antrópico, a saber: as cartas morfométricas (carta de declividade, carta de dissecação vertical, carta de dissecação horizontal e carta de energia do relevo), que são documentos que evidenciam a suscetibilidade potencial do relevo sob a influência da ação das águas e gravitacional; a carta geomorfológica (cenário de 1962), que possibilita a espacialização das formas do relevo, contribuindo para a análise da morfodinâmica; e as cartas de uso da terra (cenário de 1962 e 2000), que, em conjunto com os documentos já especificados, possibilitam a análise da influência da atuação antrópica sob o sistema relevo. De maneira geral, pôde-se detectar problemas na morfodinâmica da área de estudo, evidenciados pela presença de feições denudacionais localizadas, tais como sulcos erosivos, voçorocas, ravina e cicatrizes de escorregamentos, os quais vinculam-se ao potencial natural que o relevo da área de estudo possui ao desencadeamento de processos morfogenéticos; à dinamização de processos naturais pela atuação antrópica... (Resumo completo, clicar acesso eletrônico abaixo)

Desenvolvimento de um sistema para caracterização de dispositivos eletroluminescentes

The materials designed to be used in electroluminescent (EL) devices construction are studied and improved since 1936. Great interests in the development of this kind of devices are mainly due to its low power consumption, flexibility, low cost and easy processing. One class of ELs devices with these characteristics are produced by employing a organic-polymeric/inorganic composite from a conductive polymer blend and an inorganic electroluminescent material (Zn2SiO4:Mn) dispersed in the polymeric matrix. This kind of device operates in d.c. or a.c. potentials, with EL of hundreds candela in the green region of the visible spectrum. However, few studies on the light emission were performed for these devices. In order to characterize devices made from composites, in this work is proposed a method of characterizing the electroluminescence associated with the impedance spectroscopy technique. To implement the technique of impedance spectroscopy was employ an experimental setup consisting of a source of a.c. voltage, an oscilloscope, and a reference resistor. Associated with this system, was use a photo diode and an analog electrometer to characterize the emitted light signal from the sample. The system was implemented allows characterization by impedance spectroscopy in the frequency range from 0.2 Hz up to 2 MHz and voltage amplitudes of 5 mV up to 20 kV. This system permits, at the same time, measurement of the RMS value of the luminance for devices in frequency range from 20 Hz up to 2 MHz. To test the system efficiency, an EL device was characterized showing analogous results to those reported in literature. By doing this, was demonstrated the efficiency of the system for electroluminescence characterization associated with the electrical characterization by impedance spectroscopy, for devices

SPECT (Single photon emission tomography): Gama câmara, reconstrução tomográfica e características funcional

The SPECT (Single Photon Emission Computed Tomography) systems are part of a medical image acquisition technology which has been outstanding, because the resultant images are functional images complementary to those that give anatomic information, such as X-Ray CT, presenting a high diagnostic value. These equipments acquire, in a non-invasive way, images from the interior of the human body through tomographic mapping of radioactive material administered to the patient. The SPECT systems are based on the Gamma Camera detection system, and one of them being set on a rotational gantry is enough to obtain the necessary data for a tomographic image. The images obtained from the SPECT system consist in a group of flat images that describe the radioactive distribution on the patient. The trans-axial cuts are obtained from the tomographic reconstruction techniques. There are analytic and iterative methods to obtain the tomographic reconstruction. The analytic methods are based on the Fourier Cut Theorem (FCT), while the iterative methods search for numeric solutions to solve the equations from the projections. Within the analytic methods, the filtered backprojection (FBP) method maybe is the simplest of all the tomographic reconstruction techniques. This paper's goal is to present the operation of the SPECT system, the Gamma Camera detection system, some tomographic reconstruction techniques and the requisites for the implementation of this system in a Nuclear Medicine service

Caracterização hidroquímica do sistema aquífero Tubarão no município de Americana/SP

The growing interest in the use of groundwater resources is directly related to the economic advantages that the groundwater exploitation offers when compared to surface waters. This happens especially in large urban centers, such as the city of Americana / SP, where the rivers are increasingly contaminated by household and industrial waste. Therefore, this study aimed to characterize the Tubarão Aquifer System, in the city of Americana, to identify and evaluate the spatial distribution of different hydrogeochemical facies as well as understand the rock-fluid interaction through the construction of a conceptual hydrogeochemical model. This study was made based on the recognition of the possible chemical reactions that print the chemical characteristics of groundwater in the area. To do the job, there were two water sampling campaigns of all deep wells used by the City of Americana public water supply. From the results of hydrochemical, classification of water was made by Piper and Stiff diagrams as well as geostatistical data using cluster analysis of principal components. Based on information from the profiles obtained from the survey SIAGAS as well as in geological profiles provided by the city of Americana, we sought to detail the subsurface geology of the Subgroup Itararé in the city of Americana. The results obtained allowed the identification of three hydrochemical types in the study area: Bicarbonated calcium-sodium (1), bicarbonate sodium (2) and sodium chloride (3). The waters have bicarbonate alkaline pH to alkaline and can be considered weakly saline, with electrical conductivity values of around 161 mS / cm. Samples classified as sodium bicarbonate average of 174.99 mS / cm. The pH values ranging from 6.74 to 7.99, averaging 7.52. For the group of waters classified as sodium chloride, conductivity average is 164.32 mS / cm and pH values ranging... (Complete abstract click electronic access below)

Sistema biométrico de identificação de pessoas utilizando poros e minúcias de impressões digitais

The use of physical characteristics for human identification is known as biometrics. Among the many biometrics traits available, the fingerprint is the most widely used. The fingerprint identification is based on the impression patterns, as the pattern of ridges and minutiae, characteristics of first and second levels respectively. The current identification systems use these two levels of fingerprint features due to the low cost of the sensors. However, the recent advances in sensor technology, became possible to use third level features present within the ridges, such as the perspiration pores. Recent studies show that the use of third-level features can increase security and fraud protection in biometric systems, since they are difficult to reproduce. In addition, recent researches have also focused on multibiometrics recognition due to its many advantages. The goal of this research project was to apply fusion techniques for fingerprint recognition in order to combine minutia, ridges and pore-based methods and, thus, provide more robust biometrics recognition systems, and also to develop an automated fingerprint identification system using these three methods of recognition. We evaluated isotropic-based and adaptive-based automatic pore extraction methods, and the fusion of pore-based method with the identification methods based on minutiae and ridges. The experiments were performed on the public database PolyUHRF and showed a reduction of approximately 16% in the EER compared to the best results obtained by the methods individually

Estudo das propriedades físicas em materiais vítreos do sistema 50B2O3 - 15CuO - 20Li2O - 15X (X= Na2O, K2O, RbCI e Cs2O)

The increasing demand for devices for solid state applications in many technological areas has resulted in a high demand for new materials. Among these material have the advantage of being manufactured with different chemical compositions, and may have physical properties equal to or higher than the corresponding crystalline material. The aim of this paper was to produce borate glass system 50B2O3 – 15CuO – 20Li2O – 15X (X = Na2O, K2O, RbCl e Cs2O) to analyze the influence of the atomic radius of alkali in the physical properties of this glass system. The glasses were synthesized by the process of melting and molding. The characteristic temperatures were determined by the technique of scanning calorimetry (DSC). The non-crystalline was determined by x-ray diffraction. In order to determine the molar volume a density measurement by using the Archimedes method was used. The structural characterization was carried out using the technique of infrared spectroscopy

Anteprojeto de um sistema digital de proteção e controle aplicado em uma subestação elétrica industrial

With the growth of the demand on electric energy in the last decades, the urban distribution and transmission systems have experienced a bigger necessity to improve on the substations, the automation procedures and techniques on the operation maneuvers of such systems, in a sense that better attends the quality levels, availability, continuity and operational reliability. In this way, the objective of the present paper is to perform a study of protection and control on an electrical industrial system involving the procedures of digitizing and maneuvers automatism utilizing operational techniques and other pertinent information used in a typical high-voltage Industrial Electrical System. Analysis were made on short-circuits to specify the main components of the 138 [kV] substation, in addition, there were used digital MiCOM relays to make the protection of the present elements. With that, a program was developed to allow the user to monitor the condition of circuit-breakers through a supervision screen being able to simulate some kinds of faults, as well as observing the characteristics of each device. This way, the importance of having a fast and reliable system that ensures the equipment’s protection and the industrial process continuity due to faults on the electrical system is noticeable. It’s important to highlight that all this digitizing was mainly favored by the development of digital technology on the last years, mainly on microelectronics, also with the appearance of supervision gadgets allowing the development of complex systems in supervision and electric energy control

Avaliação de atributos do solo e vegetação em sistema agroecológico

A importância da agroecologia se dá no sentido de fornecer e ser, base e estrutura de conhecimentos mesclados, incorporando saberes tradicionais aos saberes técnicos científicos atuais, sem excluir ou rejeitar, mas usando ambos a favor da transição para uma pratica agrícola mais sustentável e coerente com os fluxos e com a complexidade natural de um ecossistema, o que não se percebe nas práticas agrícolas modernas e convencionais. Inúmeros estudos constataram que para uma boa efetividade de sistemas agroecológicos é necessário recuperar e manter o equilíbrio biológico do solo, pois isso influenciará em suas características físicas e químicas. O objetivo desse trabalho foi de caracterizar o solo sob Sistema Agroflorestal (SAF) e uma Pastagem, no município de Rio Claro (SP), para a obtenção de atributos do solo, morfológicos, físicos e químicos e também descrever a diversidade do extrato arbóreo presente na área, incluindo as espécies agrícolas, e levantar o histórico de implantação do sistema, de modo a criar e dar início a formação de um banco de dados científicos para o Grupo de Extensão Gira-Sol. Foram escolhidos dois perfis nas seguintes situações: sistema agroflorestal e uma Pastagem para descrição morfológica do solo. Em cada área foi efetuada a coleta de amostras deformadas e indeformadas e caracterizados os atributos granulometria, analises química, densidade do solo, porosidade do solo e resistência à penetração. Para a descrição morfológica dos perfis foi utilizado os procedimentos descritos por Lemos e Santos (2002), para os atributos químicos e de fertilidade do solo, Camargo et al. (1986) e EMBRAPA (1997), para granulometria, densidade e porosidade do solo e argila dispersa em água. A descrição da vegetação foi feita com auxilio de guias de identificação e por meio de parcelas, onde as espécies foram tabeladas e plotadas em um mapa da área para localização das mesmas, e.

Variação temporal e espacial da taxa de sedimentação e das características limnológicas na microbacia do córrego da Barrinha, no município de Pirassununga, SP

Studies regarding the quality and quantity of water have become more and more important because of the increasing negative environmental impacts occurred and their scarcity increase as well. At the Center of Tropical Fish Research (Centro de Pesquisas de Peixes Tropicais - CEPTAlIBAMA) located in the city of Pirassununga, SP, there is a dam named Represa Velha which supplies 128 tanks that are fish hatcheries. This dam takes in part of the Barrinha stream micro-basin where it has been observed strong impacts due to the deforestation of its support forest, as well an the intensive agricultural activities in the neighboring areas. There has been established and distributed 13 points of water-collectors disposed inside the stream and the dam. The water samples were taken from the stream only from its surface because of the low depth and, inside. In the dam, the water samples were taken at the water column, at a 50cm distance over the sediment. In every point of collection inside the dam, it was placed a chamber of sedimentation, vertically in the water column at a 70% height from the total depth. The collections took place during the dry/cold and raining/warm periods of the years 2000 and 2001. Then, it were analyzed the physical, physical-chemical, chemical and micro-biological parameters of the water samples. The obtained results were statistically analyzed throughout the SAS system (Statistical Analisys System). Parameters such as total phosphate, nitrate, nitrite and turbidity were within the established limits for the Class 2 water, according to the n° 20/1986 CONAMA Resolução. However, the total and Escherichia coli coliforms, mainly inside the Barrinha stream, had showed values above of the established limits for the same... (Complete abstract click electronic access below)

Desenvolvimento de um sistema para navegação de robôs móveis por caminhos em plantações

The use of mobile robots in the agriculture turns out to be interesting in tasks of cultivation and application of pesticides in minute quantities to reduce environmental pollution. In this paper we present the development of a system to control an autonomous mobile robot navigation through tracks in plantations. Track images are used to control robot direction by preprocessing them to extract image features, and then submitting such characteristic features to a support vector machine to find out the most appropriate route. As the overall goal of the project to which this work is connected is the robot control in real time, the system will be embedded onto a hardware platform. However, in this paper we report the software implementation of a support vector machine, which so far presented around 93% accuracy in predicting the appropriate route.

Aplicação do conceito de geração distribuída a um sistema fotovoltaico residencial

This work presents a study about distributed generation using photovoltaic systems in the context of smart grids. The characteristics of a Smart Grid and the several aspects this concept involves - distributed generation among them - are discussed. There are also examples of equipment, like smart meters, and of national and international projects. The specificities of distributed generation and the rules and standards necessary in this sort of installation are talked through with focus in the solar energy generation method. Regarding photovoltaic systems, the working principles of the panels are presented, along with its main electrical characteristics and the technologies available. Finally there is a study concerning the sizing of a distributed generation system that involves photovoltaic panels in a residential plant. An analysis of the costs and return of investment period is made about the specific case in consideration.

Sistema de gerenciamento de energia para controle de carga/descarga entre baterias de lítio e ultracapacitores, envolvendo sistema de tração elétrica com frenagem regenerativa

Pós-graduação em Engenharia Elétrica - FEIS

Dinâmica linear e não linear da variabilidade da frequência cardíaca: sensibilidade, especificidade, valor preditivo e correlação de características físicas e clínicas no Diabetes Mellitus tipo 1

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Resposta imune inata em sistema nervoso central de camundongos experimentalmente infectados com amostras de vírus rábico isoladas de diferentes espécies

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)