Aplicação clínica da mola T do grupo B para retração dos dentes anteriores

A TAS (Técnica do Arco Segmentado) representa uma alternativa à mecânica de deslizamento, muitas vezes dificultada pela incerteza da quantidade de força de atrito envolvida em cada sistema de forças utilizado. Nesse contexto, sabe-se que poucos cursos de Ortodontia no Brasil têm ensinado efetivamente a filosofia e o modo de trabalhar com a TAS. Portanto, este trabalho procura elucidar a forma de raciocínio das relaçÕes entre força e momento manipuladas na TAS, bem como mostrar a forma de confecção e utilização de mola "T" do grupo B, onde objetiva-se a movimentação recíproca dos segmentos posterior e anterior e, por fim, apresentar um caso clínico tratado com esse tipo de mecânica.

Necessidade de ancoragem do grupo A e o controle biomecanico da mola T pré-ativada por curvatura para o fechamento de espacos

Contemporary orthodontics has sought, beyond the esthetic, occlusal and functional goals, treatments even faster and with less visits to the orthodontist — especially in patients that require dental extractions in which the generated space becomes a nuisance. The segmented arch technic (SAT), by the use of a "T" loop spring, has provided such results within these requirements. Therefore, this study aimed to appraise and demonstrate the confection, activation and biomechanical control of "T" loop spring, in the group with high anchorage necessity (group A), for retraction of anterior teeth; as well as to present a case report, with high anterior retraction necessity, treated with "T" loop spring.

Associação entre implantes odontológicos e próteses parciais removíveis: revisão de literatura

Unilateral or bilateral distal-extension removable partial dentures present complex biomechanics. The movements in different directions, associated with the alveolar ridge shape and soft tissue resilience can lead to damaging forces on the supporting structures. The association between implants / removable partial denture aims to provide better mechanical and biological properties to the stomatognathic system. OBJECTIVE: The aim of this paper was to review the articles about the effect of implant support on distal extension removable partial dentures. LITERATURE REVIEW AND CONCLUSION: Studies have shown that this combination provides greater support, retention and stability to the prosthesis, thus limiting their approach movement toward supporting tissues and providing functional and psychological comfort to patients.

Associação entre implantes odontológicos e próteses parciais removíveis: revisão de literatura

Introduction: Unilateral or bilateral distal-extension removable partial dentures present complex biomechanics. The movements in different directions, associated with the alveolar ridge shape and soft tissue resilience can lead to damaging forces on the supporting structures. The association between implants / removable partial denture aims to provide better mechanical and biological properties to the stomatognathic system. Objective: The aim of this paper was to review the articles about the effect of implant support on distal extension removable partial dentures. Literature review and conclusion: Studies have shown that this combination provides greater support, retention and stability to the prosthesis, thus limiting their approach movement toward supporting tissues and providing functional and psychological comfort to patients.

Próteses parciais removíveis associadas a encaixes: implicações clínicas e laboratoriais

Nowadays, the fixed partial dentures and/or dental implants is the most requested treatmentby the majority of partially edentulous patients. However, depending on the periodontal condition of the remaining teeth, as well as the bone condition of the prosthetic space, the oral rehabilitation with these treatments may be limited or even contraindicated. In such cases, the use of removable partial dentures associated to attachments becomes an important alternative for aesthetic and functional rehabilitation. Attachments are mechanical devices consisted of two parts (patrix-matrix), one placed inside another, which act as direct retainer, providing retention, support and stability to the dentures. These devices can be classified as intra or extracoronal attachments, considering their position in relation to the abutment tooth. However, regardless the type of attachment, the association between fixed and removable partial dentures should be performed respecting the biomechanical principles of both. Therefore, the purpose of this study was to review and discuss the literature about the clinical and laboratory implications of the association between fixed and removable partial dentures by means of attachments.

Influência do desenho do implante na micromovimentação de implantes imediatos com carga imediata: análise multivariada em elementos finitos

The purpose of this paper was to evaluate the influence of different implant designs on the micromovements of immediately placed implants. CT-based finite element models comprising an upper central incisor socket and four commercially available internal connection implant designs (SIN SW®, 3i Certain®, Nobel ReplaceTM, and RN synOcta® ITI Standard) of comparable diameter and length were constructed. 50, 100 and 200N magnitude loads were applied over the implant. ANOVA at 95% level of significance was used to evaluate bone to implant relative displacement (micromovements). The implant design (68,80%) greatly influences the micromovement of immediately placed implants. However, the loading magnitude (68,80%) is the most important factor regarding the implant stability in this protocol.

Sistemas cerámicos puros parte 2: materiales, propiedades ópticas y consideraciones clínicas

While dentistry continues to advance, the aesthetic techniques have evolved in proceedings more effective, functional and biocompatible. Meanwhile, cosmetic dentistry has become a bit more complex and technically difficult. With improvement of the properties (physical and optical) of the ceramics and the establishment of a working protocol, ceramic restorations have become increasingly popular. Currently there are several ceramic systems have excellent optical properties such as opalescence, fluorescence, translucency, chromaticity, which allow the restoration to mimic the tooth structure. From the physical point of view has restored biomechanical integrity and strengthening the remaining tooth structure. All this has led the profession to experience the use of new ceramic systems ranging from conventional feldspathic ceramics to modem ceramic reinforced, injected or computer-aid made. The material selection should be based on clinical need, aesthetic and functional requirements, restoration site, prosthetic design and laboratory techniques. In this article we will deal with the characteristics of the materials, their optical properties and clinical considerations for proper selection.

Reabilitação estético-funcional sobre implantes agulhados e endósseos

This report shows the resolution of a case study whose aim was promote the aesthetic and functional rehabilitation of upper left hemi-arch over endosseous and needle implant prostheses. To improve the position of the needle implants, we performed the bucco-palatal bending of needles splinting them with composite resin; we removed the screwed implant prosthesis in the regions of the premolars (24 and 25) and molar (26). The mini-abutments of the last two implants were replaced, and in the first premolar and canine, we used cemented abutments due to implant angulation having planned soldering because of implant size and contact with one needle implant that could interfere with intimate contact bone/implant damaging biomechanics. Pick-up impressions were performed with an open tray, using a retractor cord in the needle implants and respective transfer copings. Therefore, models were related on semi-adjustable articulator after a face-bow recording and interocclusal indexes. After working cast fabrication and try-in of infra-structures, these were adjusted and related into the articulator again. Then, after ceramic build-up, adjustments, finishing, and torque, chemically-activated resin cement was applied on units 21 to 24. At the end of the case, we concluded that a good aesthetic and functional rehabilitation depends on thorough knowledge of techniques for each clinical situation.

Estudo mecânico comparativo da estabilização de fratura ilíaca com dois tipos de implantes (parafusos com placa de compressão dinâmica e parafusos associados ao polimetilmetacrilato) em hemipelves caninas sintéticas

Pós-graduação em Cirurgia Veterinária - FCAV

Análise estrutural e fadiga em prótese implanto-suportada unitária através do método dos elementos finitos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação de métodos de fixação de fraturas distais de rádio e ulna em cães de pequeno porte: revisão sistemática

As fraturas de rádio e ulna em animais de companhia são ocorrências ortopédicas de grande incidência em Medicina Veterinária. Cães de pequeno porte parecem ter uma maior incidência de fraturas em terço distal do rádio e ulna. A consolidação de ossos fraturados baseia-se na redução anatômica ou na aproximação dos maiores fragmentos. Para haver uma correta cicatrização óssea, os implantes ortopédicos devem anular todas as forças atuantes no foco de fratura. O tratamento dessas fraturas é descrito como difícil, em porte do tipo toy e miniatura. A ocorrência da não consolidação óssea é alta chegando a 60% dos casos estudados. Alguns fatores identificados afetam a osteossíntese em cães de raças de pequeno porte, pois são inerentes à instabilidade biomecânica, como, o mínimo contato da superfície do osso após a redução, devido ao pequeno diâmetro existente, diminuição da cobertura de tecido mole, formação constante de cartilagem no foco da fratura, e diminuição da densidade vascular na junção diáfise-metafisária distal em comparação com cães de raças de grande porte. O objetivo da presente revisão sistemática foi avaliar o melhor método de tratamento para fraturas distais de rádio e/ou ulna em cães de raças de pequeno porte. Como metodologia foram utilizados 14 artigos científicos, sendo 11 internacionais e quatro nacionais. A aplicação de placas, nesse estudo sistemático, foi considerado o método mais eficaz para fixação de fraturas distais de rádio e ulna em cães de pequeno porte

Efeito Agudo em Parâmetros Cinéticos em Tarefas Estáticas e Dinâmicas devido ao Uso de Palmilhas Proprioceptivas

Pós-graduação em Engenharia Mecânica - FEG

Computer graphics applied to anatomy: a study of two bio-cad modeling methods on finite element analysis of human edentulous hemi-mandible

Modeling is a step to perform a finite element analysis. Different methods of model construction are reported in literature, as the Bio-CAD modeling. The purpose of this study was to perform a model evaluation and application using two methods of Bio-CAD modeling from human edentulous hemi-mandible on the finite element analysis. From CT scans of dried human skull was reconstructed a stereolithographic model. Two methods of modeling were performed: STL conversion approach (Model 1) associated to STL simplification and reverse engineering approach (Model 2). For finite element analysis was used the action of lateral pterygoid muscle as loading condition to assess total displacement (D), equivalent von-Mises stress (VM) and maximum principal stress (MP). Two models presented differences on the geometry regarding surface number (1834 (model 1); 282 (model 2)). Were observed differences in finite element mesh regarding element number (30428 nodes/16683 elements (model 1); 15801 nodes/8410 elements (model 2). D, VM and MP stress areas presented similar distribution in two models. The values were different regarding maximum and minimum values of D (ranging 0-0.511 mm (model 1) and 0-0.544 mm (model 2), VM stress (6.36E-04-11.4 MPa (model 1) and 2.15E-04-14.7 MPa (model 2) and MP stress (-1.43-9.14 MPa (model 1) and -1.2-11.6 MPa (model 2). From two methods of Bio-CAD modeling, the reverse engineering presented better anatomical representation compared to the STL conversion approach. The models presented differences in the finite element mesh, total displacement and stress distribution.

Broilers'toes asymmetry and walking ability assessment

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)