Physical and mechanical properties of particleboard bamboo waste bonded with urea formaldehyde and castor oil based adhesive

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Physical and mechanical characterization of a recycled polypropylene and wood flour without additives

Recycled polymer matrix composites reinforced with wood flour can be a viable alternative for the replacement of wood and virgin polymers in materials used in floors, door frames, windows and external cladding. The objective of this research was to determine some physical and mechanical parameters of composite made with Pinus taeda and elliottii wood flour (WF) and recycled polypropylene (PP), without the use of compatibilizers or additives. The composites were separated into four traits, namely 100% PP, 90% PP with 10%, WF 80% PP with 20% WF and 70 % PP with 30% WF. The characterization of the composite followed the standards ASTM D-638-10, ASTM D256-00, ASTM D570 -98, ASTM D1238 -10 and ASTM G 155-05, it was also employed the surface analysis by scanning electron microscopy. The dimensional stability tests showed satisfactory results. Even the composite with a higher percentage of wood flour (30%) had a flow index of 10 MFI, considered compatible with that observed for PP (polypropylene) virgin by standard ASTM D 1238-10. The inclusion of wood flour (FM) afforded composites with good mechanical characteristics which can be applied in manufacture of different materials, specifically employed outdoors.

Estudo da usinagem por torneamento de ligas de alumínio

The non-ferrous materials have got so many mechanical, physical and chemical advantageous properties so that is provided to them consolidated position in industry. In this context, aluminium alloys have been seen a lot on many applications of engineering areas – specially on automotive, aeronautical and aerospace due to their main properties such as low density, high corrosion resistance, favorable structure weight / material resistance relation, among others characteristics that are mencioned through this study. This study aims to analyze the aluminium alloys behavior on a general context when they are used on turning process, taking for examples the 6262 and 7050 aluminium alloys. In this way, the analysis studies the datas obtained during the turning tests realized on 3 steps each one; those datas are concerning the medium and total rugosities – obtained with the assistance of a portable Surface Roughness Finish Tester, as well as the chips obtained during the tests - visual analysis, and the cutting tools wear – with the assistance of an optical microscope, under different conditions of application of cutting fluids (dry machining, application of coolant in abundance and MQL – Minimum Quantity of Lubricant). The results concerning this study show detailed information about influence of cutting fluids on the machining by turning of the aluminium alloys related on this work and also about aluminium alloys in general when they are used on turning processes with different conditions from one another. By this way, it was evident the MQL technique is the best one for the 6262 alloy. However, for 7050 alloy, it was evident that the dry machining is responsible for the best results

Assembleias fitoplanctônicas no gradiente longitudinal barragem-jusante do reservatório de Itaipu, rio Paraná (Brasil/Paraguai)

The freshwater phytoplankton, responsible for a significant part of primary production in rivers and lakes, is of great importance for matter and energy available to other trophic levels of structuring aquatic food chains. In recent decades, the construction of dams, especially for the generation of electricity, produced changes not only in physical and chemical characteristics of rivers, but also in biocoenosis of these ecosystems. Thus, research is needed to expand the basic knowledge about these environments and subsidize actions appropriate conservation and management. Considering that lotic environments are relatively little studied, and the river-reservoir interaction, the work aims to analyze the limnological conditions and assemblies phytoplankton along the gradient established by the Itaipu reservoir and downstream stretch of the Paraná River. During two periods of the year, winter and summer, we analyzed nine sampling stations: one in lentic environment (the dam), six on the Parana River (each 5 km), at the mouth of a river Monday and another at the mouth of the Iguazu river. The phytoplankton community was composed of 315 taxa, with the class Bacillariophyceae most specious. At every point the richness was higher in summer and with a longitudinal trend in the increasing points after falling after the dam and the contribution of the tributaries. The number of taxa common to the three rivers was low in both study periods. The higher taxa can be explained by the variety of environments sampled, different residence times of water and nutrient concentrations, whereas the rivers Iguazu and Monday suffer high human influence. The greater abundance of organisms in the dam, in both periods, it should be the class Cryptophyceae contributing over 75% of total phytoplankton in point. In cluster analysis (composition and abundance)...(Complete abstract click electronic access below)

Caracterização de plasmas através da espectrometria de massa

Mass spectrometry is a diagnosis that can aid in the understanding of the kinetics of chemical plasma environment. Through this you can get information about some species present in the environment and make inferences about the behavior of the plasma when parameters such as pressure and applied power changes. When analyzed plasmas generated by the discharge of argon and diglyme (both individually and mixtures of them in various proportions) could be found conditions in which the plasma behavior was different from what is often found in the literature. By the end some peculiar characteristics of plasmas generated by mixing argon / diglyme were raised and it was found that the noble gas is a good mediator of physical and chemical reactions that occur in the environment, and help in the understanding of chemical kinetics. Therefore mass spectrometry was shown highly important tool for the study of plasma environment

Relação solo-vegetação em área de cerrado no nordeste do Maranhão, Brasil

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Desenvolvimento de recobrimento submicrométrico de óxido de nióbio para aplicação em tubulações de prospecção de petróleo

Pós-graduação em Engenharia Mecânica - FEG

Caracterização de plasmas a partir do monômero digime através da espectrometria de massa: deposição polimérica

Pós-graduação em Engenharia Mecânica - FEG

Qualidade nutricional e aceitabilidade da geleia convencional e light de maná cubiu

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Influence of heat treatment and mechanical cycling on hardness and fracture analysis of Ti35Nb5Zr casting alloy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Microstructural, physical, and fluid dynamic assessment of spinel-based and phosphate-bonded investments for dental applications

This work reports the experimental evaluation of physical and gas permeation parameters of four spinel-based investments developed with or without inclusion of sacrificial fillers. Data were compared with those of three commercial formulations. Airflow tests were conducted from 27 to 546°C, and permeability coefficients were fitted from Forchheimer's equation. Skeletal densities found for spinel- (ρs = 3635 ± 165 kg/m3) and phosphate-bonded (ρs = 2686 ± 11 kg/m3) samples were in agreement with the literature. The developed investments were more porous and less permeable than commercial brands, and the differences were ascribed to the different pore morphologies and hydraulic pore sizes of ceramic matrices. The inclusion of both fibers and microbeads resulted in increases of total porosity (42.6–56.6%) and of Darcian permeability coefficient k1 (0.76 × 10−14–7.03 × 10−14 m2). Air permeation was hindered by increasing flow temperatures, and the effect was related to the influence of gas viscosity on ΔP, in accordance with Darcy's law. Casting quality with molten titanium (CP Ti) was directly proportional to the permeability level of the spinel-based investments. However, the high reactivity of the silica-based investment RP and the formation of α-case during casting hindered the benefits of the highest permeability level of this commercial brand.

Addition of Chlorhexidine Gluconate to a Glass Ionomer Cement: A Study on Mechanical, Physical and Antibacterial Properties

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Nematofauna edáfica em sistemas de uso do solo na microrregião de Chapadinha-MA

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Variação sazonal das variáveis físicas e químicas em riachos de duas bacias da região centro-sul do estado do Paraná, sul do Brasil

The present study was developed in two streams from the two different drainage basins located in the mid-southern region of Paraná state. In each stream were evaluated some physical and chemical parameters in open (without streamside vegetation) and shaded (with streamside vegetation) segments. Monthly samplings were carried out from January to December 2007. The following limnological parameters were measured: water temperature, specific conductance, oxygen saturation, pH, turbidity and current velocity. In the same stream were not observed differences among segments from the drainage basins, and nominal values and seasonal pattern have been very similar between open and shaded ambient. A Principal Component Analysis (PCA) showed small divergence between streams and segments, with separation of groups with base sampling dates. The results suggest that the region is homogeneous according to physical and chemical water conditions, therefore, stronger influenced for time factor, and diverging seasonal periods associated a climatic region condition.

Seasonal variation of biotic and abiotic parameters in parallel neotropical fishponds

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)