Biomechanical influence of crown-to-implant ratio on stress distribution over internal hexagon short implant: 3-D finite element analysis with statistical test

The study of short implants is relevant to the biomechanics of dental implants, and research on crown increase has implications for the daily clinic. The aim of this study was to analyze the biomechanical interactions of a singular implant-supported prosthesis of different crown heights under vertical and oblique force, using the 3-D finite element method. Six 3-D models were designed with Invesalius 3.0, Rhinoceros 3D 4.0, and Solidworks 2010 software. Each model was constructed with a mandibular segment of bone block, including an implant supporting a screwed metal-ceramic crown. The crown height was set at 10, 12.5, and 15 mm. The applied force was 200 N (axial) and 100 N (oblique). We performed an ANOVA statistical test and Tukey tests; p < 0.05 was considered statistically significant. The increase of crown height did not influence the stress distribution on screw prosthetic (p > 0.05) under axial load. However, crown heights of 12.5 and 15 mm caused statistically significant damage to the stress distribution of screws and to the cortical bone (p <0.001) under oblique load. High crown to implant (C/I) ratio harmed microstrain distribution on bone tissue under axial and oblique loads (p < 0.001). Crown increase was a possible deleterious factor to the screws and to the different regions of bone tissue. (C) 2014 Elsevier Ltd. All rights reserved.

Search for long-lived particles that decay into final states containing two electrons or two muons in proton-proton collisions at root s=8Tev

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Search for a standard model-like Higgs boson in the mu(+)mu(-) and e(+)e(-) decay channels at the LHC

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Measurement of J/ψ and ψ(2S) Prompt Double-Differential Cross Sections in pp Collisions at s√=7 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Measurement of the cross section ratio σttbb/σttjj in pp collisions at √s = 8 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Decay constants of the pion and its excitations in holographic QCD

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The "chemical oxygen demand/total volatile acids" ratio as an anaerobic treatability indicator for landfill leachates

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Observation of the rare B-s(0)->mu(+)mu(-) decay from the combined analysis of CMS and LHCb data

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of crown-to-implant ratio on peri-implant stress: a finite element analysis

The aim of this study was to evaluate stress distribution in the fixation screws and bone tissue around implants in single-implant supported prostheses with crowns of different heights (10,12.5, 15 mm crown-to-implant ratio 1:1, 1.25:1, 1.5:1, respectively). It was designed using three 3-Dmodels. Each model was developed with a mandibular segment of bone block including an internal hexagon implant supporting a screw-retained, single metalceramic crown. The crown height was set at 10, 12.5, and 15 mm with crown-to-implant ratio of 1:1, 1.25:1, 1.5:1, respectively. The applied forces were 200 N (axial) and 100 N (oblique). The increase of crown height showed differences with the oblique load in some situations. By von Mises'criterion, a high stress area was concentrated at the implant/fixation screw and abutment/implant interfaces at crown-to-implant ratio of 1:1, 1.25:1, 1.5:1, respectively. Using the maxiinum principal criteria, the buccal regions showed higher traction stress intensity, whereas the distal regions showed the largest compressive stress in all models. The increase of C/I ratio must be carefully evaluated by the dentist since the increase of this C/I ratio is proportional to the increase of average stress for both screw fixation (C/I 1:1 to 1:1.25 ratio = 30.1% and C/I 1:1 to 1 :1.5 ratio = 46.3%) and bone tissue (C/I 1:1 to 1:1.25 ratio = 30% and C/I 1:1 to 1:1.5 ratio = 51.5%). (C) 2014 Elsevier B.V. All rights reserved.

Nonmesonic weak decay dynamics from proton spectra of Lambda-hypernuclei

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Identification techniques for highly boosted W bosons that decay into hadrons

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Searches for heavy Higgs bosons in two-Higgs-doublet models and for t→ch decay using multilepton and diphoton final states in pp collisions at 8 TeV

Searches are presented for heavy scalar (H) and pseudoscalar (A) Higgs bosons posited in the two doublet model (2HDM) extensions of the standard model (SM). These searches are based on a data sample of pp collisions collected with the CMS experiment at the LHC at a center-of-mass energy of root s = 8 TeV and corresponding to an integrated luminosity of 19.5 fb(-1). The decays H -> hh and A -> Zh, where h denotes an SM-like Higgs boson, lead to events with three or more isolated charged leptons or with a photon pair accompanied by one or more isolated leptons. The search results are presented in terms of the H and A production cross sections times branching fractions and are further interpreted in terms of 2HDM parameters. We place 95% C.L. cross section upper limits of approximately 7 pb on sigma B for H -> hh and 2 pb for A -> Zh. Also presented are the results of a search for the rare decay of the top quark that results in a charm quark and an SM Higgs boson, t -> ch, the existence of which would indicate a nonzero flavor-changing Yukawa coupling of the top quark to the Higgs boson. We place a 95% C.L. upper limit of 0.56% on B(t -> ch).

QCD sum rules calculation of heavy Λ semileptonic decay

We set up sum rules for heavy lambda decays in a full QCD calculation which in the heavy quark mass limit incorporates the symmetries of heavy quark effective theory. For the semileptonic Λc decay we obtain a reasonable agreement with experiment. For the Λb semileptonic decay we find at the zero recoil point a violation of the heavy quark symmetry of about 20%. © 1998 Published by Elsevier Science B.V. All rights reserved.

Constraining the absolute neutrino mass scale and Majorana CP violating phases by future 0νββ decay experiments

Assuming that neutrinos are Majorana particles, in a three-generation framework, current and future neutrino oscillation experiments can determine six out of the nine parameters which fully describe the structure of the neutrino mass matrix. We try to clarify the interplay among the remaining parameters, the absolute neutrino mass scale and two CP violating Majorana phases, and how they can be accessed by future neutrinoless double beta (0vυββ) decay experiments, for the normal as well as for the inverted order of the neutrino mass spectrum. Assuming the oscillation parameters to be in the range presently allowed by atmospheric, solar, reactor, and accelerator neutrino experiments, we quantitatively estimate the bounds on m 0, the lightest neutrino mass, that can be inferred if the next generation 0υββ decay experiments can probe the effective Majorana mass (m ee) down to ∼1 meV. In this context we conclude that in the case that neutrinos are Majorana particles, (a) if m 0≳300 meV, i.e., within the range directly attainable by future laboratory experiments as well as astrophysical observations, then m ee≳30 meV must be observed, (b) if m 0 ≤ 300 meV, results from future 0υββ decay experiments combined with stringent bounds on the neutrino oscillation parameters, especially the solar ones, will place much stronger limits on the allowed values of m 0 than these direct experiments. For instance, if a positive signal is observed around m ee = 10 meV, we estimate 3≲m 0/meV≲65 at 95% C.L.; on the other hand, if no signal is observed down to m ee = 10 meV, then m 0≲55 meV at 95% C.L.

Measurement of the natural variation of 13C:12C ratio in leaves at Reserva Ducke Forest, central Amazonia

Investigation of carbon isotope fractionation by plants was carried out at two sub-areas located in Reserva Ducke, central Amazonia: open reserve (virgin forest with low density of plant species); and closed reserve (virgin forest with high density of plant species). Preliminary results (δ‰ 13C: 12C values, PDB) of leaf analysis at different plant heights indicate the following: Eschweilera matamata Hub. (Lecythidaceae), common name 'matamata', -31.55±0.61; Protium heptaplyllum March. (Burseraceae), common name 'breu branco', -32.34±1.39; Calophyllum brasiliense Camb. (Guttiferae), common name 'jacareúba', -30.72±0.23; Scleronema micrantthum Ducke. (Bombacaceae), common name 'cardeiro'. -28.81±0.68; and Carapa guianensis Aubl. (Meliaceae), common name 'andiroba', -31.07±0.51. It is possible that the plant species analysed belong to the C3 photosynthetic cycle. In general, the species in the open reserve show differences of the order of 1.66±0.34‰ (greater in 13C) as compared with the same species in the closed reserve. The old leaves show differences in the relative isotopic enrichment (δ) of the order of 1‰, being smaller in new leaves in both reserves. The probable occurrence of an isotopic gradient from the lower (2-5 m) to the upper part (15-20 m) of the plant, of the order of 1.3‰, smaller in 13C, in species from the dense forest was noted. However, only two plants from each species were analysed during a two-year period, data obtained to far are still preliminary, and results should, therefore, be revised. Moreover, according to the literature, the natural carbon isotope fractionation by plants shows metabolic, physiological and environmental dependence. © 1991.