Analise de defeitos em motores através de vibração mecânica: estudo de caso

Revolving machines are among the most used equipment in general industry and therefore expenditures on this equipment class are a significant portion of the total amount spent by the company. If there is an unscheduled stop of some of this equipment, industrial plants can lose huge amounts of money caused by interrupted production and parts delay. Others may increase significantly maintenance costs due to consequences elsewhere not affected before. Even plant and people safety can be in danger if there is an operation interruption without a backup system start. This work is focused on a rotating system case study which is monitored by vibration analysis that shows that is possible to determine when is the most appropriate time for equipment intervention without any reliability loss just by using a simple and cheap system which is not much used because professionals are not aware to its utility. Industrial facilities were evaluated by fail detection and historical analysis in some equipment in order to show feasibility of vibration analysis through a before-during-after process. The plant evaluated is part of a chemical multinational located in Guaratinguetá-SP. At this time, that plant had around 650 critical equipment monthly monitored and no unscheduled shutdown was registered in one year period due to equipment monitoring

Formalismo canônico da mecânica clássica: alicerce da mecânica quântica

We present a succinct review of the canonical formalism of classical mechanics, followed by a brief review of the main representations of quantum mechanics. We emphasize the formal similarities between the corresponding equations. We notice that these similarities contributed to the formulation of quantum mechanics. Of course, the driving force behind the search of any new physics is based on experimental evidence

Análise da estabilidade dimensional e resistência mecânica em bambu Guadua angustifolia pós-processos de tratamentos químicos e térmico

Nowadays, bamboo is being studied because of their strength properties according with their specific mass and speed of growth, which makes it an important alternative as a new resource that will help reduce pressure on forests and helpping them favoring the minimization of uncontrolled deforestation in many regions of Brazil. This study aimed, in general, to analyze physical and mechanical properties of the material with the divulgation of its potential for industrial application. To do so, in this research were determined in relation to the physical properties, moisture content, dimensional stability and the apparent densities and the mechanics and basic, just a tension parallel to grain, in order to observe the interference of various kinds of treatments (chemical, thermal and natural) on the strength and modulus of elasticity in this request. The species used was the Guadua angustifolia, a species native of Brazil. All tests were performed at Universidade Estadual Paulista - Campus Experimental Itapeva in the laboratory of Materials Properties. The methodology used for testing of moisture, density and tension parallel to grain were based on NBR 7190/1997 for the wood, and dimensional stability tests were based on much the same as in COPANT 462/1972 (South American) . The preservative treatments conducted followed the recommendation of each manufacturer. The values obtained in tests of physical properties were satisfactory especially with respect to density and dimensional stability analyzed by the coefficient of anisotropy, showed that, compared to wood, excellent quality for the shrinkage test, obtaining a coefficient of 1.2. With respect to parallel tensile tests to fibre results showed, in most cases, that test specimens with the presence of us have lower values of resistance and modulus of elasticity when compared with those without us. In the treatment of thermal-treatment there was an apparent treatment there was an apparent increase in...

Analise mecânica e microestrutural em estruturas tubulares aeronáuticas soldadas de aço ABNT 4130

Airplane Motor Cradles have a complex geometry, since they require different conbinations between different tubes and TIG welded in several angles. In T-25 aircraft and Universal T-27 Tucano (EMBRAER / FAB), besides having to bear the engine balance, these components maintain fixed the nose landing gear in another extremity. They are considered critical to flight safety, and for this reason, the aviation standards are extremely rigid in their production, imposing a zero index” of defects on the final weld metal quality. These structures may be containing an historical of welding repairs, whose effects on their structural integrity are not computed. In this work we analyzed the standardised AISI 4130 steel and the raw steel of tubes to the Airplane Motor Cradles. First of all, microscopy and microanalysis of the base steel, then we analyzed the effects of the TIG weld. Tensile testing was conducted to measure the difference between the mechanical properties of standardised steel and without this treatment

Avaliação mecânica da colagem estrutural entre compósitos poliméricos e materiais metálicos utilizados em dutos petroquímicos

The development of technology for structural composites has as one of its ends form a set of materials that combine high values of mechanical strength and stiffness and low density. Today, companies like Embraer and PETROBRAS and research institutions like NASA, working with these materials with recognized advantages in terms of weight gain, increased performance and low corrosion. We have developed a systematic study to determine the bond strength between composite carbon fiber / epoxy and fiberglass / epoxy laminate both bonded to a carbon steel which are widely used in the petrochemical industry and repair. For morphological evaluation and bonding between materials of different natures, ultrasound analysis, optical microscopy and stereoscopy were performed. To simulate actual conditions, the composites were subjected to conditioning by using heat shock temperatures from -50 to 80 ° C for 1000 cycles for composite carbon fiber / epoxy composites and 2000 cycles for fiberglass / epoxy . The use of composites studied here proved to be efficient to perform repairs in metallic pipes with application petrochemical, as when exposed to sudden changes of temperature (-50 ° to 80 ° C) cycling at 1000 to 2000 times, its mechanical properties (shear and tensile) practically do not change

Avaliação da percepção de professores do departamento de produção e alunos do quinto ano do curso de Engenheira de Produção mecânica da Unesp de Guaratinguetá de como está o curso em relação às competências e habilidades para engenheiros

In 2002, the Ministry of Education (MEC) published the Curriculum Guidelines for Engineering courses in the country. The Guidelines contain subjects like the profile of graduates, the course structure, curriculum, internships and skills and abilities, all geared to guide the training of engineers in Brazil. The objective of this study is to evaluate together with teachers of the Production Department of this University and students of the fifth year of Production Engineering is how student learning of Production Engineering for the development and importance of skills within the course and skills for engineers who are present in the Curriculum Guidelines for engineering courses developed by MEC

Discursos no milagre dos pães e dos peixes: tradução e estudo

The purpose of this work is to study the multiplication of loaves and fishes miracle scene that is narrated by the four gospels of the New Testament. After briefly presenting the gospels and the Greek dialect, koiné, that is used in the composition of these texts, we translated the corpus in order to recognize both the syntactic structures and lexicon used by the authors. In addition, we shortly analyzed the narrative categories of the miracle. At last, we focused on the descriptive and comparative study of the direct and indirect speeches that feature in the narratives, which has lead us to conclude that the direct speech takes a key role in organizing the scene as a whole

Julia Franck: tradução de contos da escritora alemã e o uso de memórias de tradução

The objective of this project is to present a literary translation from three short stories of German contemporary writer Julia Franck into Portuguese. The selected short stories are “Bäuchlings”, “Zugfahrt” e “Streuselschnecke” from the book Bauchlandung: Geschichten zum Anfassen (2008). In this project, I present also a small overview about assisted translation tools, including the Translation Memories, and their use by some translators and my experience as a novice user of this tool and the creation of a German-Portuguese glossary based on the translated short stories

Produção e caracterização físico-mecânica do compósito cimento-madeira com variação granulométrica dos resíduos lignocelulósicos

The need to reduce environmental damage and add value to waste causes more and more new alternatives appear to unite these two points. One of the main ways to achieve this in timber industries and the use of waste for making panels. This work was aimed at studying the influence of particle size and density in Eucalyptus mechanical compressive strength of cement composite wood. For this study was performed production and physico-mechanical characterization of specimens, using portland cement, water and waste eucalyptus. The methodology consists of a statistical study of the results obtained by calculating the density and axial compression tests and a subsequent comparison of these results with other studies. The results showed that there are significant differences in density and compressive strength when using different particle sizes the particles of eucalyptus. In general, the smaller the particle size, the lower the compression strength and the greater the density when the samples are produced with the same trait

Caracterização físico-mecânica de elementos estruturais roliços perfilados de Amaru

The study of physical and mechanical properties of wood is essential for its structural use and it is of great importance to the construction industry. Thus, this study aimed to determine the physical and mechanical properties of the wood Amaru - a hybrid of Eucalyptus, developed by Plantar Projects and Forest Products Ltda. In order to determine the properties of Amaru, round samples were used, which were provided to the Laboratory of Wood and Wooden Structures of the School of Engineering of São Carlos, University of São Paulo - LaMEM / EESC / USP. For the characterization of the physical properties, the apparent specific gravity and moisture content of the samples were determined. To the mechanical characterization, the following properties were evaluated: strength and stiffness in compression, strength and stiffness in bending, shear and tension. The procedures of the tests performed in this study were done according to the recommendations of the Brazilian Wood Standard ABNT NBR 7190:1997. The specimen used were confectioned in actual dimensions, according to as those used in the construction system proposed by Plantar. The results obtained from the tests performed showed that the mechanical properties approached the values proposed by the Wood Standard NBR 7190. The visual grading was important to provide a primary idea about the failure modes to be obtained from the tests performed. The bending test showed the modulus of elasticity (MOE) and Modulus of Rupture (MOR), which resulted in 15822 MPa and 101,7 MPa, respectively. The compression test resulted in values Ec0,m and fc0, 15698 MPa and 50,7 MPa. The tensile strength (ft0) of this hybrid was calculated and its value obtained was 60,8 MPa. The shear strength (fv0) was 8,2 MPa. The results obtained from the tests are the basis for engineers and architects to design structures using wood species Amaru

A tradução do conto Lange Schatten de Marie Luise Kaschnitz

The principal objective of this project is to present a literary translation from German to Portuguese of the short story 'Lange Schatten', in the collection of the same name, Lange Schatten Erzählungen, published in 1960, written by Marie Luise Kaschnitz. Kaschnitz was born in 1901 in Karlsruhe, south-west Germany. The translation was completed with the aid of virtual and printed dictionaries, in addition to books on the history of German literature and some translation theories. Also, this paper provides brief commentaries on topics related to translation, particularly those concerned with the difficulties posed by translation of this project

Estudo da relação entre o fator de início de tradução de eucariotos 5A (eIF5A) e a etapa de elongação da tradução

O fator de início de tradução 5A (eukaryotic translation iniciation factor 5A, eIF5A) é altamente conservado entre arqueas a eucariotos, sendo que as proteínas eIF5A de Saccharomyces cerevisiae e de mamíferos são 63% idênticas. eIF5A sofre uma modificação pós-traducional única na célula, a hipusinação de um resíduo de lisina. Essa proteína já foi relacionada ao início da tradução, transporte nucleocitoplasmático, decaimento de mRNA e proliferação celular, mas a função crítica de eIF5A ainda não foi esclarecida. A depleção deste fator em S. cerevisiae leva a uma diminuição (30%) da taxa de síntese protéica, sugerindo que eIF5A seja um fator envolvido na tradução de um grupo específico de mensageiros. Dados do laboratório demonstram interação física entre eIF5A e proteínas ribossomais bem como com o fator de elongação 2 da tradução (eEF2). A interação com eEF2, sugere que eIF5A atua na etapa de elongação da tradução, ao invés do início da tradução, como proposto inicialmente. Com o objetivo de avaliar a relação de eIF5A com a etapa de elongação, foram realizadas análises de interações genéticas entre o gene codificador de eIF5A (TIF51A) e diversos genes codificadores de proteínas envolvidas na tradução. Através de análises de interações genéticas, foi observado que o mutante estável de eIF5A, tif51AK56A, apresenta um defeito de crescimento quando o mutante de eEF2, eft2H699K, está expresso em alto número de cópias, enquanto que o mutante tif51AQ22H/L93F não apresenta defeitos nesta condição. Foi observado também que o mutante tif51AQ22H/L93F apresenta um defeito de crescimento mais severo quando ocorre superexpressão de EFT2, gene codificador de eEF2. Foi observado ainda que não há complementação alélica entre os mutantes estáveis de eIF5A e que a reversibilidade do fenótipo de sensibilidade a temperatura... (Resumo completo, clicar acesso eletrônico abaixo)

Análise dos fatores de desempenho do ENADE: estudo parao curso de engenharia de produção mecânica

This work has the propose to discuss the National Examination Performance of students for the course in Production Engineering , from 2005 up to 2011, subsidies are shown how this came about assessment and how the course has been evaluated in recent years . Compares higher education from public and private universities in Brazil and is also discussed how important a good performance in the exam. Qualitative and quantitative surveys were conducted at different times that the work that enables a critical analysis of the examination , the institution and also the students themselves , so the list is the main motivators for the exam and also what should be done to obtaining good results in academic performance. Motivators for the exam has highlighted its importance is paramount and the consent of all involved from the beginning of the course to ensure that the examination is compulsory for all graduates of undergraduate manufacturing engineering in Brazil

Flexão e análise dinâmico-mecânica de compósitos 5HS e NCF com resina epóxi monocomponente produzidos por RTM

In order to study resin distribution and homogeneity of composite laminates manufactured by RTM, it was used CYCOM 890 monolithic toughened epoxy as a matrix with two different configurations of intermediated modulus (IM) carbon fibers: Satin Weave (5HS) and non crimp fabric (NCF). The injection parameters were defined based on Thermo Gravimetric Analysis (TG), Differential Scanning Calorimetry (DSC) and rheological analysis. After processing the material, the resin/fiber impregnation was studied using ultrasonic test, Thermo Gravimetric Analysis, Differential Scanning Calorimetry, Dynamic Mechanical Analysis (DMA) and flexural tests. Therefore, it was able to observe an internal residual stress during the cooling process in both laminates, higher in the composite using NCF fabric due to the lack of symmetry, although a good proportion of fiber/matrix has been verified by the lower values of flexural modulus deviation. The DMA enabled the visualization of glass transition and its association with the inter and intra molecular interaction and movement, in which the NCF composite presented better permeability due to the lowest temperature of glass transition, when compared to the Satin Weave composite

A tradução de termos simples, expressões fixas e semifixas em um corpus paralelo da área de sensoriamento remoto: uma proposta de glossário bilíngue

Pós-graduação em Estudos Linguísticos - IBILCE