Removal of glyphosate herbicide from water using biopolymer membranes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Neonatal anoxia in rats: hippocampal cellular and subcellular changes related to cell death and spatial memory

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morphological effects of neem (Azadirachta indica A. Juss) seed oil with known azadirachtin concentrations on the oocytes of semi-engorged Rhipicephalus sanguineus ticks (Acari: Ixodidae)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Neutron-proton mass difference in nuclei in a relativistic harmonic quark model

The nuclear dependence of the neutron-proton mass difference is examined in a relativistic harmonic quark model with the assumption of a swelling of the individual nucleon originated by a decrease of the spring constant inside the nuclear medium. A decrease of the neutron-proton mass difference is obtained which is reasonably small and in the right direction to cope with the Nollen-Schiffer anomaly in mirror nuclei. © 1992 Società Italiana di Fisica.

Skeletal muscle degeneration and regeneration after injection of bothropstoxin-II, a phospholipase A2 isolated from the venom of the snake Bothrops jararacussu

A myotoxic phospholipase A2, named bothropstoxin II (BthTX-II), was isolated from the venom of the South American snake Bothrops jararacussu and the pathogenesis of myonecrosis induced by this toxin was studied in mice. BthTX-II induced a rapid increase in plasma creatine kinase levels. Histological and ultrastructural observations demonstrate that this toxin affects muscle fibers by first disrupting the integrity of plasma membrane, as delta lesions were the earliest morphological alteration and since the plasma membrane was interrupted or absent in many portions. In agreement with this hypothesis, BthTX-II released peroxidase entrapped in negatively charged multilamellar liposomes and behaved as an amphiphilic protein in charge shift electrophoresis, an indication that its mechanism of action might be based on the interaction and disorganization of plasma membrane phospholipids. Membrane damage was followed by a complex series of morphological alterations in intracellular structures, most of which are probably related to an increase in cytosolic calcium levels. Myofilaments became hypercontracted into dense clumps which alternated with cellular spaces devoid of myofibrillar material. Later on, myofilaments changed to a hyaline appearance with a more uniform distribution. Mitochondria were drastically affected, showing high amplitude swelling, vesiculation of cristae, formation of flocculent densities, and membrane disruption. By 24 hr, abundant polymorphonuclear leucocytes and macrophages were observed in the interstitial space as well as inside necrotic fibers. Muscle regeneration proceeded normally, as abundant myotubes and regenerating myofibers were observed 7 days after BthTX-II injection. By 28 days regenerating fibers had a diameter similar to that of adult muscle fibers, although they presented two distinctive features: central location of nuclei and some fiber splitting. This good regenerative response may be explained by the observation that BthTX-II does not affect blood vessels, nerves, or basal laminae. © 1991.

Congenital ranula: a case report

The purpose of this study was to report a case of bilateral swelling on the floor of the mouth of a 7-month-old patient. The lesion was congenital and had started to cause feeding problems. After the clinical diagnosis of ranula was made, the lesion was marsupialized. The obtained specimen was submitted for histopathological examination, which revealed an epithelial-lined cystic lesion. These results led to the final diagnosis of mucus retention cyst. After an 8-year follow-up period, the patient is in good general health with no recurrences.

Lateral periodontal cyst: a case report and literature review

The lateral periodontal cyst is considered a developmental odontogenic cyst with unusual occurrence. In most cases it is preliminary diagnosed as a radiographic finding, presenting as well circumscribed or as a round or teardrop-shaped radiolucent area. Due to its location it can easily be misdiagnosed as a lesion of endodontic origin. Final diagnosis should be based on histopatological examination. The purpose of this paper is to report a classic case of lateral periodontal cyst located in the anterior region of mandible and to review the relevant literature which describes the clinical, radiological and histopathological features of lateral periodontal cysts. A 50 years female patient complained of an asymptomatic gingival swelling in the region between the left mandibular lateral incisor and canine. Radiographic examination revealed a well circumscribed radiolucency with approximately 0.5 cm diameter with a radiopaque margin between the roots of the left mandibular lateral incisor and canine. The adjacent teeth had vital pulp. A total enucleation of the lesion was performed, and intraoperative examination showed a single lesion with no communication between the cyst's cavity and the oral environment. Histological examination revealed that the lesion was lateral periodontal cyst of developmental origin. There was no recurrence or complications for 24 months follow-up. The lateral periodontal cyst can be considered in the differential diagnosis when a radioloucent lesion appears adjacent to the roots of vital teeth. The treatment of choice is surgical removal and subsequent histological evaluation to confirm the diagnosis. Relapses are infrequent.

Aggressive osseous commitment result by keratocyst odontogenic tumour: case report, radiographic and clinical standpoints

Keratocystic odontogenic tumour (KCOT) previously known as odontogenic keratocyst was recently classified as a benign lesion characterized by an infiltrating pattern, local aggressiveness with the propensity to recurrence. It is thought to arise from the dental lamina. Pain is usually not associated with KCOT until swelling occurs, and it commonly affects the posterior mandible. Multiple KCOT are associated with nevoid basal cell carcinoma syndrome. This study reports an aggressive case of KCOT with destruction of the osseous tissue of the mandible, accentuated face asymmetry, dysphagia and dysphonia. It was managed with a defined protocol which entailed diagnosis, treatment with enucleation along with peripheral ostectomy and rehabilitation. A long-term follow-up schedule was provided to the patient to observe the recurrence behaviour of this cyst. In postoperative phase, no complication was noticed regarding wound healing and recurrence.

Biological characterization of the Amazon coral Micrurus spixii snake venom: isolation of a new neurotoxic phospholipase A2

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of heat-moisture treatment on the structural, physicochemical, and rheological characteristics of arrowroot starch

The effect of heat-moisture treatment on structural, physicochemical, and rheological characteristics of arrowroot starch was investigated. Heat-moisture treatment was performed with starch samples conditioned to 28% moisture at 100℃ for 2, 4, 8, and 16 h. Structural and physicochemical characterization of native and modified starches, as well as rheological assays with gels of native and 4 h modified starches subjected to acid and sterilization stresses were performed. Arrowroot starch had 23.1% of amylose and a CA-type crystalline pattern that changed over the treatment time to A-type. Modified starches had higher pasting temperature and lower peak viscosity while breakdown viscosity practically disappeared, independently of the treatment time. Gelatinization temperature and crystallinity increased, while enthalpy, swelling power, and solubility decreased with the treatment. Gels from modified starches, independently of the stress conditions, were found to have more stable apparent viscosities and higher G' and G″ than gels from native starch. Heat-moisture treatment caused a reorganization of starch chains that increased molecular interactions. This increase resulted in higher paste stability and strengthened gels that showed higher resistance to shearing and heat, even after acid or sterilization conditions. A treatment time of 4 h was enough to deeply changing the physicochemical properties of starch.

Caracterização físico-mecânica de painéis de partículas de bambu com adição de casca de café

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Considerações sobre o sucesso do tratamento endodôntico

The follow up after endodontic treatment is the most effective tool for evaluating the quality of treatments performed, as well as, it lets to examine the procedures used at different stages of endodontic therapy. Clinical and radiographic findings must be taken into consideration to determine the percentage of endodontic success. Clinical findings include: absence of pain or positive examinations for percussion and palpation, swelling, tooth mobility and fistula. Regarding the radiographic findings it is possible to report absence of periapical radiolucent areas suggestive of periapical lesions and presence of bone cortical. Thus the aim of this study was to perform a bibliographic revision and a discussion about the factors of endodontic treatment follow up.

Chitosan/Carbomer-based tablets containing Metronidazole for potential treatment of periodontal diseases

Mucoadhesive tablets with different mixtures of chitosan and carbomer homopolymer type B were prepared in order to obtain new formulations containing metronidazole for periodontal disease treatment. All tablets were characterized by swelling and erosion studies, ex vivo mucoadhesion force and in vitro drug release. The drug released mechanism was described by Korsmeyer-Peppas and Weibull models. Tablets containing increased amounts of chitosan presented higher swelling ability and the drug release was prolonged in the simulated saliva fluid. The mechanisms for the drug release from tablets were complex, including diffusion, swelling and erosion simultaneously. This kind of delivery system is suitable for formulating metronidazole mucoadhesive systems, representing a good alternative for the local treatment of periodontal diseases.

Evaluation of bamboo particleboards produced with urea-formaldheyde resin

The bamboo waste can be an alternative material to sustain the crescent demand for particleboards, also bringing ecological benefits as reduction of the pressure for raw materials and landfill space demands. In this context, this research aimed to manufacture and determine some physical and mechanical properties of particleboards with bamboo waste particles (Dendrocalamus giganteus), obtained from different sources, bonded with four different percentages of urea–formaldehyde (UF) based resin (6%, 8%, 10% and 12% related to dry material of particles). Response variables investigated were: density; moisture content; thickness swelling in 2 and 24 hours; water absorption in 2 and 24 hours; internal adhesion (STpe); strength in tension parallel to faces (STpa); modulus of elasticity (MOE) and modulus of rupture (MOR). Results permitted to conclude that particleboards as mentioned showed good performance only in the physical properties requirements imposed by Brazilian Standard NBR 14810, but this was not observed to mechanical properties considered. New researches are needed in order to optimize the producing process parameters.

Study of the feasibility of mix of species from sawmill waste and limiting for particleboard

This study aims to determine physical properties of particleboard made of sawmill waste, as a mix of several wood species, and two adhesives: urea-formaldehyde, usually employed in industry (even with drawbacks or formaldehyde emission during pressing) and FASTBOND®, water based resin, still poorly referenced in literature. Sixteen panels have been produced, in four experimental conditions, defined by using two adhesives and a 12 mm thick limiter (or not). Variance analysis was adopted to evaluate influence of experimental conditions on physical properties of produced panels, manufactured in nominal dimensions 350x350mm; 10% resin related to particles mass (at 5% moisture); 3.5 MPa compaction pressure, temperature 130°C, in a 10 min cycle. Tests to determine density, moisture content, swelling and water absorption were carried out based on normative parameters of ABNT NBR 14810:2006. Results have been satisfactory to panels produced with urea-formaldehyde but those manufactured with polychloroprene based resin (FASTBOND®) not meet regulatory requirements. Best results have been obtained without limiter.