Assessment of the Correlation Between Insertion Torque and Resonance Frequency Analysis of Implants Placed in Bone Tissue of Different Densities

The primary stability of dental implants is fundamental for osseointegration. Therefore, this study aimed to assess the correlation between insertion torque (IT) and resonance frequency analysis (RFA) of implants placed in mandibles and maxillas of different bone densities. Eighty dental implants were placed in maxillas and mandibles, and IT and the implant stability quotient (ISQ) were measured at the time of implant insertion. Bone density was assessed subjectively by the Lekholm and Zarb index. The type I and II densities were grouped together (group A)as were the type III and IV densities (group B). The IT in group A was higher (Student t test, P = .0013) than in group B (46.27 +/- 18.51 Ncm, 33.62 +/- 14.74 Ncm, respectively). The implants placed in group A showed higher ISQ (Student t test, P = .0004) than those placed in group B (70.09 +/- 7.50, 63.66 +/- 8.00, respectively). A significant correlation between IT and the ISQ value was observed for group A (Pearson correlation test; r = 0.35; P = .0213) and for group B (r = 0.37; P = .0224). Within the limitations of this study, it was possible to conclude that there is a correlation between IT and RFA of implants placed in mandibles and maxillas of different bone densities.

The Role of Implant/Abutment System on Torque Maintenance of Retention Screws and Vertical Misfit of Implant-Supported Crowns Before and After Mechanical Cycling

Purpose: This study aimed to evaluate the role of the implant/abutment system on torque maintenance of titanium retention screws and the vertical misfit of screw-retained implant-supported crowns before and after mechanical cycling. Materials and Methods: Three groups were studied: morse taper implants with conical abutments (MTC group), external-hexagon implants with conical abutments (EHC group), and external-hexagon implants with UCLA abutments (EHU group). Metallic crowns casted in cobalt-chromium alloy were used (n = 10). Retention screws received insertion torque and, after 3 minutes, initial detorque was measured. Crowns were retightened and submitted to cyclic loading testing under oblique loading (30 degrees) of 130 +/- 10 N at 2 Hz of frequency, totaling 1 x 10(6) cycles. After cycling, final detorque was measured. Vertical misfit was measured using a stereomicroscope. Data were analyzed by analysis of variance, Tukey test, and Pearson correlation test (P < .05). Results: All detorque values were lower than the insertion torque both before and after mechanical cycling. No statistically significant difference was observed among groups before mechanical cycling. After mechanical cycling, a statistically significantly lower loss of detorque was verified in the MTC group in comparison to the EHC group. Significantly lower vertical misfit values were noted after mechanical cycling but there was no difference among groups. There was no significant correlation between detorque values and vertical misfit. Conclusions: All groups presented a significant decrease of torque before and after mechanical cycling. The morse taper connection promoted the highest torque maintenance. Mechanical cycling reduced the vertical misfit of all groups, although no significant correlation between vertical misfit and torque loss was found.

Torque Stability of Different Abutment Screws Submitted to Mechanical Cycling

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Associação do treinamento resistido e aeróbico em pacientes com doença pulmonar crônica

Introduction: The pulmonary rehabilitation (PR) is composed of aerobic and resisted exercises that improve the functional capacity to the exercise, life quality and decrease respiratory symptoms in subjects with chronic pulmonary disease. Objective: Assess the effects of a combined PR program in the cardiorespiratory function and peripheral muscle strength in subjects with chronic pulmonary disease. Method: Patients with chronic pulmonary disease were submitted to the PR program, which was developed on 24 sessions of 60 minutes (three times per week). The program was composed of aerobic exercises (two times per week) and resisted exercises (once a week). Before and after the PR the patients were submitted to manovacuometry in order to measure the maximum inspiratory pressure (MIP) and the maximum expiratory pressure (MEP), ventilometry, peek expiratory flow (PEF), six minute walking test (6MWT) and one maximum repetition (1RM). The data are presented in absolute frequency, percentage and mean±standard deviation. The t Student test was used to compare data before and after the PR and the ANOVA test to compare before, after and predicted distances in the 6MWT (p<0.05). Results: Seven patients were part of this study, 85.70% of women, 71.40% with pulmonary emphysema diagnosis. The mean age was 69.43±5.59 years old, the height was 1.61±0.07 m, the mean weight was 66.20±8.40 kg and the body mass index mean was 25.50±2.48 kg/m². From the variables assessed, the MEP increased from 79.71±13.69 to 84.42±12.83 cmH2O (p=0,03), the PEF increase from 255.71±66.3 to 320.00±93.63 l/min (p=0,03) and the distance in the 6MWT from 415.28±47.90 to 483,79±79,77 m (p=0,02). The load in the 1RM test in the reverse peck deck exercise (before - - 17.10±8.10kg; after – 210.40±9.00kg), knee in leg extension machine (before – 17.10±9.50kg; after – 26.40±13.10kg) and hip extensors (right before – 48.60±22.10kg; after – 62.90±19.30kg; and left before – 46.40±20.10kg; after – 62.10±18.20kg) increased significantly (p<0,05). Conclusion: After the PR program there was improvement in the expiratory muscular strength, in the lower limbs strength and in the functional capacity. Besides that, there was a reduction in the airflow obstruction of the subjects with chronic pulmonary disease.

Nonlinear dynamics and control strategies: On a energy harvester vibrating system with a linear form to non-ideal motor torque

In this paper, we deal with the research of a vibrating model of an energy harvester device, including the nonlinearities in the model of the piezoelectric coupling and the non-ideal excitation. We show, using numerical simulations, in the analysis of the dynamic responses, that the harvested power is influenced by non-linear vibrations of the structure. Chaotic behavior was also observed, causing of the loss of energy throughout the simulation time. Using a perturbation technique, we find an approximate analytical solution for the non-ideal system. Then, we apply both two control techniques, to keep the considered system, into a stable condition. Both the State Dependent Ricatti Equation (SDRE) control as the feedback control by changing the energy of the oscillator, were efficient in controlling of the considered non-ideal system.

Carbon Film Coating of Abutment Surfaces: Effect on the Abutment Screw Removal Torque

Purpose: To evaluate the effect of diamond-like carbon (DLC) coating of prefabricated implant abutment on screw removal torque (RT) before and after mechanical cycling (MC).Materials and Methods: Fifty-four abutments for external-hex implants were divided among 6 groups (n = 9): S, straight abutment (control); SC, straight coated abutment; SCy, straight abutment and MC; SCCy, straight coated abutment and MC; ACy, angled abutment and MC; and ACCy, angled coated abutment and MC. The abutments were attached to the implants by a titanium screw. RT values were measured and registered. Data (in Newton centimeter) were analyzed with analysis of variance and Dunnet test (alpha = 0.05).Results: RT values were significantly affected by MC (P = 0.001) and the interaction between DLC coating and MC (P = 0.038). SCy and ACy showed the lowest RT values, statistically different from the control. The abutment coated groups had no statistical difference compared with the control. Scanning electron microscopy analysis showed DLC film with a thickness of 3 mm uniformly coating the hexagonal abutment.Conclusion: DLC film deposited on the abutment can be used as an alternative procedure to reduce abutment screw loosening.

Satélites estabilizados por rotação e torque de radiação solar direta

The aims of this work are to analyze the direct solar radiation pressure torque (TPRS) in the rotational motion of spin-stabilized artificial satellites, to numerically implement these solutions and to compare the results with real data of the Brazilian Satellite Data Collection – SCD1 and SCD2, supplied by INPE. The mathematical model for this torque is determined for a cylindrical satellite, and the components of this torque are determined in a fixed system in the satellite. An analytical solution for the spin motion equations is proposed, in which TPRSD does not affect the spin velocity of the satellite. Two approaches are adopted in the numerical implementation of the developed theory: the first one considers the proposed theory and the second introduces a variation in the spin velocity based on its real variation. The results obtained indicate that the solar radiation pressure torque has little influence in the right ascension and declination axis of rotation due to the small dimension of the satellite and altitude in which it is found. To better validate the application of the presented theory, the angular deviation of the spin axis and solar aspect angle were also analyzed. The comparison of the results of the approaches conducted with real data show good precision in the theory, which can be applied in the prediction of the rotational motion of the spin-stabilized artificial satellites, when others external torques are considered besides the direct solar radiation pressure torque

Órtese de tornozelo: efeito sobre a razão de pico torque muscular eversor excêntrico/inversor concêntrico do tornozelo durante simulação do basquetebol

The ankle sprains represent the most common injuries in sports and basketball. In this sense, the use of ankle bracing and strength capacity analysis of the ankle evertor and invertor muscles, have been suggested as preventive measures and important tools for identifying risk factors associated with ankle sprains. However, questions still persist as to effect of the use ankle bracing on biomechanical variables related to the stability of the ankle. For this reason, this study aims to analyze the effect of the use of ankle bracing on peak torque (PT) of ankle evertor and invertor muscles and on eccentric evertor/concentric invertor torque ratio (EVEECC/INVCON), during the basketball match-play simulation. Ten healthy college basketball players, without mechanics or functional ankle instability performed a laboratory-based protocol representative of work rates observed during basketball match-play, in two different situations, with and without use of ankle bracing. The test was composed of a succession of intermittent physical effort equally distributed in four periods of 10 minutes each, considering the mechanical and physiological demands of a basketball match-play. Prior to the start of the trial (Evaluation 1) and after 2° (Evaluation 2) and 4° (Evaluation 3) periods, the subjects performed five maximal isokinetic concentric and eccentric contractions of ankle invertor and evertor muscles, separated by two minutes rest, at 60 °/s and 120 °/s. After testing for normality of data distribution with the Shapiro-Wilk test, was used the ANOVA repeated measures for two factors and post-hoc Bonferroni test for comparison of variables between assessments. Was adopted p < 0.05. There was no significant difference for PT and EVEECC/INVCON torque ratio between assessments. There was a decrease in PT EVEECC at 60º/s and 120º/s for the ...(Complete abstract click electronic access below)

Reprodutibilidade do pico de torque isocinético e da taxa de desenvolvimento de força dos músculos rotadores internos do ombro em nadadores

A natação é um esporte praticado em um meio que oferece grande resistência ao deslocamento do atleta que necessita realizar grande força com a articulação do ombro durante as braçadas sendo, desse modo, de fundamental importância a avaliação da força desta articulação. São poucos os estudos que avaliam a força desta articulação em nadadores visando o desempenho esportivo. OBJETIVO: Verificar a reprodutibilidade do pico de torque (PT) e da taxa de desenvolvimento de força (TDF) dos rotadores internos do ombro em nadadores. MÉTODOS: Foram analisados 10 nadadores que realizaram 5s de contração isométrica, 5 contrações concêntricas em baixa velocidade (60°/s), e 5 contrações concêntricas em alta velocidade (180°/s). Foram determinados o PT e a TDF dos membros dominante e não-dominante. Após um intervalo de uma semana, os indivíduos foram testados novamente, sob as mesmas condições do primeiro teste, e foi avaliado o grau de confiabilidade. RESULTADOS: Os valores de PT foram similares entre as tentativas (p > 0,05). O coeficiente de correlação intraclasse (CCI) do PT isométrico foi de 0,76 e 0,85 (p < 0,05), na contração isocinética a 60º/s foi de 0,56 (p > 0,05) e 0,90 (p < 0,05) e na contração isocinética a 180º/s foi de 0,84 e 0,76 (p < 0,05), para o membro dominante e não dominante respectivamente. A TDF pico não foi significantemente diferente entre os testes para ambos os membros (p > 0,05), porém não houve correlação significante entre os testes para ambos os membros (p > 0,05). CONCLUSÃO: Conclui-se que o teste isocinético de rotação interna do ombro em nadadores apresenta boa reprodutibilidade para a determinação do PT. Não foi observada boa reprodutibilidade para a TDF pico, provavelmente pelo baixo número de voluntários