A semiconductor strain gage tactile transducer

This paper describes the development of a semiconductor strain gage tactile transducer. It was designed with the goal of measuring finger forces without affecting the hand dexterity. The transducer structure was manufactured with stainless steel and has small dimensions ( 4 min diameter and I min thickness). It is light and suitable to connect to the finger pads. It has a device that prevents its damage when forces are applied. The semiconductor strain gage was used over due its small size and high sensitivity, although it has high temperature sensitivity. Theory, design and construction details are presented the signal conditioning circuit is very simple because the semiconductor strain gage sensitivity is high. It presents linear response from 0 to 100 N, 0.5 N resolution, fall time of 7.2 ms, good repeatability, and small hysteresis. The semiconductor strain gage transducer has characteristics that can make it very useful in Rehabilitation Engineering, Robotics, and Medicine.

Morphological variation in two genetically distinct groups of the golden-striped salamander, Chioglossa lusitanica (Amphibia : Urodela)

Morphometric and colour pattern variation in the endemic Iberian salamander Chioglosso lusitanica is concordant with the genetic differentiation of two groups of populations separated by the Mondego river ill Portugal. Salamanders from the south have shorter digits than those from the north. Clinal variation with a south to north increase in limb. toe and finger length was found superiniposed on this dichotomy resulting in stepped clines for characters describing appendage size. Genetic variability was paralleled by colour pattern variability in the contact zone and in northern populations. To explain the observed parallels we invoke the neutral processes of vicariant isolation. admixture in a secondary contact zone, genetic drift in addition to selection acting along all environmental gradient. Morphological constraints imposed by a highly specialized ecological niche may explain why the genetic subdivision of C. lusitanica since the early, Pleistocene has remained fairly cryptic.

Description of a new species of Pseudopaludicola Miranda-Ribeiro, 1926 from the state of São Paulo, Southeastern Brazil (Anura, Leiuperidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Toothache referred from auriculotemporal neuralgia: case report

P>AimTo present a 52-year-old male patient who complained of intense pain of short duration in the region of the left external ear and in the ipsilateral maxillary second molar that was relieved by blockade of the auriculotemporal nerve in the infratemporal fossa.SummaryExtra- and intraoral physical examination revealed a trigger point that reproduced the symptoms upon finger pressure in the ipsilateral auriculotemporal nerve and in the outer auricular pavilion. The patient's medical history was unremarkable. The maxillary left second molar tooth was not responsive to pulp sensitivity testing and there was no pain upon percussion or palpation of the buccal sulcus. Periapical radiographs revealed a satisfactory root filling in the maxillary left second molar. on the basis of the clinical signs and symptoms, the auriculotemporal was blocked with 0.5 mL 2% lidocaine and 0.5 mL of a suspension containing dexamethasone acetate (8 mg mL(-1)) and dexamethasone disodium sulfate (2 mg mL(-1)), with full remission of pain 6 months later. The diagnosis was auriculotemporal neuralgia.Key learning pointAuriculotemporal neuralgia should be considered as a possible cause of nonodontogenic toothache and thus included in the differential diagnoses.The blockade of the auriculotemporal nerve in the infratemporal fossa is diagnostic and therapeutic. It can be achieved with a solution of lidocaine and dexamethasone.

the human hand. I. Movements of the index ANALYSE ELECTROMYOGRAPHIQUE DU PREMIER MUSCLE INTEROSSEUX DORSAL DE LA MAIN HUMAINE

An electromyographic study of the musculus interosseus dorsalis was performed on the right hand of 25 young adult male right-handed volunteers. The electrodes, simple coaxial needles, were implanted one at the ulnar head and the other at the radial head of the muscle. The muscles were analyzed during free movements of the index and against resistance. The same movements were done in four different positions of the fore-arm and hand, without variation in the results for each one of the movements. There was no significant difference between the activities of the ulnar head and radial head. During freely performed movements, muscle activity was recorded only during abduction. During movements against resistance, muscle activity was completely nil only during adduction; during the remaining movements, however, moderate (2+), strong (3+) and very strong activity (4+) was recorded.

A study of different calcification areas in newly formed bone 8 weeks after insertion of dental implants in rabbit tibias

In orofacial implantology there are many types of implants for the different systems. Among these is the implant surface type, e.g., a screw type, cylindrical and laminar. Furthermore, the implants are different in their dimensions, their metal composition, their surface condition, such as smooth, grit or layered surfaces and in their methods of application. Two different self-tapping implants, one smooth and the other grit-blasted, are screwed into the bone, and another one with a plasma of titanium coating, which is also in a screw form but with greater spaces between the screw threads are compared. The greatest amount of bone deposition in the bone/implant interface was encountered in the latter one, the smooth surfaced implant being in second place. All of these systems can alter the implant healing process and to demonstrate this, we injected bone markers in the rabbits over different periods of time so as to observe the different areas of bone deposition in the tibias where the implants had been inserted. The bone tracers used were Alizarin, Calcein and Xylenol-orange. The amount of deposition was calculated by using the method of surface morphometry.

Temperature and stoichiometry effect on microstructural and ferroelectric properties of Pb(Zr1-xTix)O3 thin films prepared by chemical soulution deposition

Lead zirconate titanate (PZT) solutions were prepared using a polymeric precursor method, Zr n-propoxide and Ti i-propoxide were used as starting materials with ethylene glycol and water as solvents. The PZT solution was spin-coated on Pt/Ti/SiO2/Si substrates, baked on a hot plate, and finally heat-treated in a tube furnace between 400 and 800°C. The surface morphology and grain size of the films were characterized by atomic force microscopy (AFM), using a tapping mode with amplitude modulation. The films, thermal annealed at temperatures higher than 500°C, exhibited a dense microstructure, without noticeable cracks or voids. Electrical properties were investigated as a function of composition and annealing temperature.

Nanostructured films of perylene derivatives: High performance materials for taste sensor applications

Four perylene derivatives (PTCD) have been used as transducing materials in taste sensors fabricated with nanostructured Langmuir-Blodgett (LB) films deposited onto interdigitated gold electrodes. The Langmuir monolayers of PTCDs display considerable collapse pressures, with areas per molecule indicative of an edge-on or head-on arrangement for the molecules at the air/water interface. The sensing units for the electronic tongue were produced from 5-layer LB films of the four PTCDs, whose electrical response was characterized with impedance spectroscopy. The distinct responses of the PTCDs, attributed to differences in their molecular structures, allowed one to obtain a finger printing system that was able to distinguish tastes (salty, sweet, bitter and sour) at 1 μM concentrations, which, in some cases, are three orders of magnitude below the human threshold. Using Principal Component Analysis (PCA) data analysis, the electronic tongue also detected trace amounts of a pesticide and could distinguish among samples of ultrapure, distilled and tap water, and two brands of mineral water. © 2004 by American Scientific Publishers. All rights reserved.

Corrosion behavior in graphite refractories impregnated with ZrO 2 and CeO 2 carrying solutions

This paper investigates corrosion behavior in graphite refractory hot metal impregnated with ZrO 2 and CeO 2 carrying solutions used in Blast Furnace hearth, consisting of 50% graphite and 50% anthracite. Corrosions tests were carried out by means of finger test method in an induction furnace, using bar-shaped 30×30×280 mm test specimens and hot metal from CSN#2 Blast Furnace runner. The temperature chosen for this test was 1520°C and sixty-minute isotherm. Upon test completion, test specimens were characterized by their dimensional variation, X-ray diffractometry and Scanning Electronic Microscopy (SEM).

Cross-cultural differences for three visual memory tasks in Brazilian children

Norms for three visual memory tasks, including Corsi's block tapping test and the BEM 144 complex figures and visual recognition, were developed for neuropsychological assessment in Brazilian children. The tasks were measured in 127 children ages 7 to 10 years from rural and urban areas of the States of São Paulo and Minas Gerais. Analysis indicated age-related but not sex-related differences. A cross-cultural effect was observed in relation to copying and recall of Complex pictures. Different performances between rural and urban children were noted. © Perceptual and Motor Skills 2005.

Efeitos do tipo de rizoma de multiplicação e da cobertura morta no desenvolvimento e produtividade de cúrcuma (Curcuma longa L.)

The aim of this study was to evaluate the influence of different types of rhizomes utilized as seed and the effects of mulch in the culture of Turmeric. This work was conducted in the experimental cultivation area of the Universidade de Ribeirão Preto - UNAERP, in Ribeirao Preto, state of Sao Paulo, Brazil from September/1997 to July/1998. The experiments were arranged in a randomized complete block with a factorial arrangement 2x3, design with 4 replications (32 plants each). The treatments consisted of the use of types of rhizomes utilized to proliferation (head and finger) and types of mulch (absent, grass and leaves/branches). This study investigated proliferation (61, 88 and 124 days after installation), length, shooting and number of leaves of the mother plant besides the number of leaves of the shoot (112, 146 and 233 days after installation), number of finger rhizomes and head rhizomes, fresh and dry biomass of rhizomes and the yield of essential oil (after harvest - July 1998). Obtained results showed a great influence of the type of rhizome used to proliferation. Head rhizomes produced, in weight, about 30% more, when compared to plants from finger rhizomes. Mulching almost duplicated rhizome productivity from 2338 kg.ha -1 of dry rhizomes to 4499 kg.ha -1, when rhizome used to proliferation was finger and from 3046 kg.ha -1 to 5943 kg.ha -1, when using head rhizomes. The yield of essential oil did not show any alteration, independently of the treatments realized.

Mapeamento da produtividade e perímetro do tronco de clones de seringueira em argissolo vermelho amarelo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Association between breast-feeding practices and sucking habits: A cross-sectional study of children in their first year of life

In addition to providing nutrition and immunological protection, breast-feeding has positive effects on the development of the infant's oral cavity. The aim of the present study is to assess breast-feeding patterns and to analyze the influence of breast-feeding practices and maternal sociodemographic variables on the prevalence of non-nutritive sucking habits in a sample of Brazilian infants. This cross-sectional study was carried out in Southern Brazil. A random sample of 100 mothers of infants up to 12 months of age was interviewed during the National Vaccination Campaign Day. The prevalence and median duration of breast-feeding were assessed. Breast-feeding practice, the exposure factor, was categorized as exclusive breast-feeding, predominant breast-feeding, complementary breast-feeding, or weaning. Maternal sociodemographic variables included age, race, marital status, educational level, profession, and family income. The outcome investigated was the prevalence of sucking habits (pacifier use and thumb sucking). We used two-sample tests, the chi-square test and Fisher exact test0 for statistical analyses of the data. The study revealed that 75% of infants were being breast-fed. Pacifier use and thumb sucking were common in 55%. Bottle-feeding was prevalent in 74% of infants. Breast-feeding was negatively correlated with pacifier use and thumb sucking (OR = 0.11; 95% CI: 0.03 to 0.4). Bottle-feeding was strongly associated with weaning (p = 0.0003). Among the sociodemographic variables, only marital status showed a statistical association with sucking habits (p = 0.04). These findings suggest that breast-feeding can prevent the occurrence of sucking habits. Although we could not evaluate causality assessment, malocclusion prevention seems to be yet one more reason for promoting breast-feeding practices.

Fusion of fingerprint recognition methods for robust human identification

Biometrics is one of the biggest tendencies in human identification. The fingerprint is the most widely used biometric. However considering the automatic fingerprint recognition a completely solved problem is a common mistake. The most popular and extensively used methods, the minutiae-based, do not perform well on poor-quality images and when just a small area of overlap between the template and the query images exists. The use of multibiometrics is considered one of the keys to overcome the weakness and improve the accuracy of biometrics systems. This paper presents the fusion of a minutiae-based and a ridge-based fingerprint recognition method at rank, decision and score level. The fusion techniques implemented leaded to a reduction of the Equal Error Rate by 31.78% (from 4.09% to 2.79%) and a decreasing of 6 positions in the rank to reach a Correct Retrieval (from rank 8 to 2) when assessed in the FVC2002-DB1A database. © 2008 IEEE.