659 resultados para FUNÇÃO EXECUTIVA


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The study aimed to evaluate the yield and fruit quality of papaya 'Sunrise Solo' as function of nitrogen and boron fertilization. The experiment had a randomized block design with four replications, two plants per plot with a single border. To make up the treatments, we used the experimental array Plan Puebla III, which set the rates for nitrogen (0.0 to 111.2 - 200 - 288.9 - 400 g plant(-1), and B (0.0 - 0.83 - 1.5 - 2.16 - 3.0 g plant(-1)), in a total of ten treatments. The addition of nitrogen increased the yield, average fruit weight and number of fruits per plant. The nitrogen and boron increased the diameter and length of the fruit, amount of seeds and content of soluble solids. The pH of the pulp decreased linearly with increasing doses of nitrogen and boron. It was observed a significant effect of N rates on the level of vitamin C.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The influence of Fentanyl, Droperidol and Innovar on renal function and electrolytes (sodium and potassium) were studied on 18 dogs. Fentanyl disturbs kidney function and decreases plasmatic potassium. Droperidol and Innovar do not disturb the main renal function but decrease plasmatic potassium. The results obtained point out the importance of associate employment of Fentamyl and Droperidol, since the latter seems to establish the renal disorders occasioned by Fentanyl, probably owing to its adrenergic α blocking action.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The author first describes the role of playing games and toys on physical, intellectual, emotional and social development of children. He further discusses how they should be selected in relation to the various stages of child growth.

Relevância:

20.00% 20.00%

Publicador:

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The authors studied the lateral positional desviations of the mandible, in relation to the facial median line in 30 (thirty) full edentulous patients, with the purpose to verify the influence of the unstrained guided (chinpoint guidance) and deglutition methods for the determination of centric relation. According the results obtained they conclude that the unstrained guided method produced a mandibular lateral desviation with a mean value of the 0.752 mm and in the deglutition method the mean value observed was 1.109 mm. The statistical analysis of the results revealed for the unstrained guided method a proportion of the points to the right and left of the median line not statistically significant, while for the deglutition method the difference was statistically significant at a level of 5%.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A late survey of the renal function was performed in eighteen patients with paracoccidioidomycosis treated with amphotericin B, according to the glomerular filtration rate (RFG). The method was compartment analysis by single injection using EDTA Cr51, determined by its 'half biological life' and dosages of blood urea nitrogen and creatinine. The patients were seventeen males and one female. They were from 22 to 76 years old. Ten of these patients received 2 g of amphotericin B and eight of them received 4 g. There were no expressive difference between the two groups, taking into account age, dose in mg/kg of weight/day, time of conclusion of the treatment, urea, creatinine, glomerular filtration was smaller than the normal, and average of the half biological life of the EDTA Cr51 was large than the normal. The achieved results permitted us to consider that the amphotericin B determines deficit of renal function. However, by the present study, it hasn't been possible to affirm if the modifications are definitive.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The body weights evolution and the development of mandible were analyzed in rats that received 0.25 mg F contained into a commercial product, during 30 and 60 days consecutively, beginning at birth. The study presented the following conclusions: 1. The treated animals showed body weights always inferior to the controls, with more evident difference at 60 days period; 2. Analysis showed a reduction in the horizontal linear measurements, but not in the length of the mandibular diastem. No influence was observed in relation to the verticals.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Being the surface roughness a fundamental property in the fit of the castings, it was determined the roughness of 5 high-copper casting alloys, according to the heating over their melting temperature. That way, the specimens made with smooth plastic in the shape of a rectangular plate, 2 mm x 7 mm x 11 mm were invested into a cristobalite investment. After heating and elimination on the plastic, the molds were filled by 3 g of molten alloy, casted in a electrical casting machine at the casting temperature at 25 degrees C and 50 degrees C overheating. The surface roughness was measured in a roughness analyser, Talysurf. As a result, it was verified that there is a variation of surface roughness among the alloys tested, and the heating of the alloys until 50 degrees C over the melting temperature does not interfere in the roughness.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

It was evaluated the Vickers hardness of five high-copper casting alloys, in their original package form and after casting, according to the casting method used. That way, ten ingots, supplied by the manufacturers of each alloy, were included in self-curing acrylic resin, polished, numerated and submitted to Vickers hardness test at load of 200 g during 30 seconds. Afterwards the numerated ingots were removed from the acrylic resin and five of those were cast in an electrical casting machine and the other five in a centrifugal casting machine with an air/gas torch. The specimens obtained were included in self-curing acrylic resin, polished and submitted to Vickers hardness test. As a result it was verified that there is a variation of hardness among the alloys tested, and the use of the electrical casting machine produced lower hardness values than those produced when used the centrifugal casting machine with an air/gas torch. Also, there is a decrease of hardness of the cast alloys when they are tested in their original form and after casting.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The authors analysed the simultaneous effects of the dimensional and weight alteration of resins utilized for esthetic facets submitted to warehousing conditions and periods of time. The resins showed different behaviour and a neat correlation between dimensional alteration and weight. The condition of immersion promoted dimensional alteration 50% lower and an alteration of weight three times higher.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work was carried out at the Fazenda Experimental Lageado, at Botucatu, SP, to evaluate the physiological quality of cucumber (Cucumis sativus L.), seeds harvested at different fruit maturity stages and post-harvest resting periods. Fruits of cultivar Pérola were harvested at 6 ages (20, 25, 30, 35, 40 and 45 days after anthesis) and they were stored at room temperature for 0, 5, 10 or 15 days before seed extraction. After this, seeds were fermented for 2 days, washed and dried. External visual characteristics of fruits and seeds were observed at harvest. Seed quality was evaluated as for moisture, dry matter content, dimensions, germination, and vigour. Results showed that seed germination and vigour increased in fruits aging from 20 to 40 days. Post-harvest periods improved seed quality of 20-day old fruits not reaching the seed quality levels observed in 40 or 45-day old fruits, without post-harvest resting period. Seeds from fruits at 25, 30 and 35 days of age, with 10 or 15 days of post-harvest resting period reached the same quality levels of seeds from fruits with 40-45 days old.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

An experiment was conducted to study alfalfa (Medicago sativa L.) yields as affected by row spacings of 15, 20, 30 and 40 cm and plant densities originated from 10, 15, 20 and 30 kg/ha of seeds. The experiment was conducted on a Typic Eutrortox (Clay) in Bandeirantes, state of Paraná, Brazil. The experimetal design was a 4 × 4 factorial in randomized triplicated blocks. There was no significant effect of row spacings and plant populations on plant height and dry matter production. The 15 cm row spacing showed higher number of stems throughout the two years of the experiment. Up to the 6th cut the plant density of 30 kg/ha also lead to a higher number of stems/ha.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

It were analyzed Eucalyptus grandis trees of 8 years old in the forest group of Duraflora S/A, with different annual increments based on volume, to the related studies of specific gravity values based on productivity indexes. The methodology used in analysis of specific gravity was the gamma-ray attenuation technique of Americium-241. The Eucalyptus grandis showed a specific gravity decreasing with the increasing of parcel productivity. For a gain of 3,5 m3 in productivity there was a decreasing of 1% in specific gravity. Nevertheless, it was not observed correlation between specific gravity and basal area in a same parcel. The present work stands out too, some of the difficulties found with relation to wood specific gravity determinations and emphasize the importance of take samples in the form of full rounded plates in three or four relative positions in the tree.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

E grandis seedlings of Bofete progeny, cultivated in nurseries of Eucatex Florestal, were collected at ages of 55, 69, 83, and 97 days, separated into leaves, stem, and roots. The seedlings were then placed in identified paper bags, and oven-dried until weight became constant. They were then weighed and chemically analyzed for the determinate of dry matter production, concentrations and accumulation of N, P, K, Ca, Mg, S, B, Cu, Fe, Mn, and Zn in the several seedling ages. The distribution of total dry matter weight complied with the following descending order: leaf > stem > roots. Conversely to expectations, the highest concentrations of nutrients occurred in leaves for N and Mn only. Seedling hardened process resulted in N and S deficiency. The sequence of macronutrient concentration in seedlings at the time of shipment was the following: leaf > root > stem for N; root = stem > leaf for P; leaf = root = stem for K; stem > root > leaf for Ca; root > leaf > stem for Mg and S. All macronutrient concentrations in organs decreased with age, except for Ca. Concentrations of Cu, Fe, and Zn in all seedling specimens decreased with age. The sequence of micronutrient concentrations in seedling specimens at the time of shipment was the following: root >stem = leaf for B; root > stem > leaf for Cu and Fe; root > leaf > stem for Zn, and leaf > stem > root for Mn. At the time of shipment, at 97 days of age, K was the most extracted macronutrient of all, followed in a descending order by Ca, N, Mg, P, and e S. At the end of the seedling production rotation, Mn was the most extracted micronutrient, followed by Fe, Zn, Cu, and B.