Comparação entre o índice de reprovação entre os sistemas de matrícula Seriado e Crédito da Faculdade de Engenharia de Guaratinguetá

The Engineering Education in Brazil is constantly changing since its inception always aiming to meet the market demand for this type of professional. To meet this market demand, the institutions of engineering education to bring within their organizations as the new curriculum guidelines Registration System. In 2008 the Faculdade of Guaratinguetá entered its new Registration System, from series to Credit. The failure rate for each system will be the basis for understanding what the best system for this institution

Cogeração de energia com motores de combustão interna

The tertiary sector is largely responsible for the growth of electricity consumption in Brazil. The large commercial and public buildings, hypermarkets and shopping centers stand out as major consumers of electricity for lighting, power and thermal energy. Brazil presents significant potential for the deployment of small cogeneration plants, especially in the tertiary sector. Allied to this, the possibility of natural gas supply and the growing demands in favor of maintaining and preserving the environment favor the implementation of cogeneration plants. In this context, this paper presents a technical and economic analysis of installing a cogeneration plant using internal combustion engine with natural gas in a mall

Diagnóstico da gestão e do gerenciamento dos resíduos eletroeletrônicos gerados no campus da Faculdade de Engenharia de Guaratinguetá/Unesp

Currently, in Brazil, the quantity and quality of new types of wastes, discarded without criteria in urban areas, has been responsible for considerable impacts on public health and the environment. According to a report prepared by the Institute of Applied Economic Research (IPEA), the country loses about U.S. $ 8 billion annually, due lack of waste recycling, which go directly into landfills or dumps. Among these solid wastes are waste electrical and electronic equipment (WEEE), whose characteristics are complex, by having in its composition substances of high value-added and other health hazards which require different treatment of household waste. Aiming to fill the gap in Brazilian environmental legislation, on 02/08/2010, was sanctioned the National Policy Solid Waste (Law No. 12,305), already regulated on 23/12/2010 (Decree No 7404), whose based on the following principles:reduction of waste generation and toxicity of shared responsibility, proper planning management, social inclusion of waste pickers and sustainable production and consumption. Given the above, this work presented here, aims generally present a diagnosis of the current situation of electronic waste generated in the Faculty of Engineering, Campus Guaratinguetá, FEG / UNESP, to provide data for management and management of these waste, based on sustainability, the economic losses and minimizing environmental impacts and public health related to the flow and the improper disposal of these wastes

Perfil de pesquisa dos departamentos da Faculdade de Engenharia do Campus de Guaratinguetá

To know the profile of research of each Department of Education is of utmost importance for future actions of improvements. This type of study must be made continuously of form to evaluate Departments´ trends as well as the College´s as a whole, besides stimulating the activities of research and formation of human resources of the Departments. In this work is quantified activity of orientation and research of the Departments of the College of Engineering of Guaratinguetá - UNESP, through national and international publications in periodic, congresses and supervisions of graduation works, masters, doctoral, post doctoral, and scientific initiation, in a period five years (2007 through 2012). For balance of points to the considered issues, a criterion based on the CAPES qualification of periodic has been assumed. On the basis of the results of this work, has been observed enormous differences and particularities between the seven analyzed Departments of Education. In a general way, some Departments presented good performance in the three criteria, whereas others obtained a good performance in only one of them. The Department of Materials and Technology was the only one in which 25% of the professors obtained maximum note for the publication in periodic, while in the Departments of Civil, Electric Engineering and Mechanics 75% of the professors did not reach sufficient punctuation in order to equal a publication in periodic with B2 extract

Modelagem e simulação numérica de um sistema de refrigeração por absorção utilizando o par H2O-LiBr

The term refrigeration solar refers to any air conditioning system that uses solar energy as a primary energy source. The use of solar radiation for cooling purposes is divided according to their technological possibilities which are distinguished from one another as the way that energy is involved in the cycle, work or heat. The first case is related to vapor compression cycles, in which the work input is provided by the photovoltaic conversion of solar energy into electrical energy. In the second case, an absorption refrigeration cycle is used and the thermal energy collected from the solar radiation is provided at the generator of this cycle.. In this work a system with an absorption cycle using the pair BrLi-water, using solar energy as input is modeled. It is considered a simple refrigeration cycle whose the equations of mass and energy conservation in each component are developed in order to obtain an algebraic equation set and a simulation routine using the EES software. Although the simulation operates under certain specified thermal load it is possible to estimate the necessary areas of heat exchangers and solar collectors

Projeto de recuperação da planta termelétrica do Laboratório de Vapor do Departamento de Energia da Faculdade de Engenharia de Guaratinguetá

Brazil is nowadays the greatest bet of investors for the future due to its stable economy growth. The country has grown side by side with the greatest demand for electrical energy. The international appeal for renewable sources is causing a change in the Brazilian energetic matrix, raising the amount of energy generated by thermoelectric power plants. The construction of new power plants, running on biomass, requires a crescent number of capacitated personnel to run them. The Faculdade de Engenharia de Guaratinguetá – UNESP – has a steam laboratory; witch is deactivated, which has a thermoelectric plant of small capacity. The laboratory reactivation and the return of its activities can be an important tool in order to graduate engineer able to operate on such units. This paper proposes four new experiments to be simulated on the Collage’s Energy Dep. Steam Lab when it gets back to its educational activities

Estrutura térmica de cidades de pequeno e médio porte do interior paulista (1961-2009)

The climate is one of the main elements of the natural environment that governs the life of man. Specific conditions of temperature, humidity, light, wind and precipitation have direct influence on physiological conditions that man needs to survive and more than that, besides the influence on human and animal physiology, the climatic elements are also responsible for a significant portion of economic activities such as industry, agriculture, commerce, transportation, and others. Therefore, any change in weather patterns has great impact on daily activities, and even more in urban sites, where the most of population is concentrated nowadays. Based on this discussion and concerned in understand the atmospheric structure, this monograph intends to analyze the pattern of atmospheric and temperature element in seven cities of small and medium size located in the state of São Paulo countryside... (Complete abstract click electronic access below)

Desenvolvimento e caracterização de compósitos de fibras naturais modificadas e híbridos: fibras da coroa do abacaxi/polipropileno e fibras da coroa do abacaxi/fibras de vidro/polipropileno

The concern with the environment preservation has done with that researchers as well as industries invest in the search for materials that come from renewable sources. Natural fibers, because they are ecologically correct and have low cost, have been studied as a possible substitute, even if partial, of synthetic fibers in the development of polymeric composites. In this context, the hybrid composites (natural/synthetic) increase considerably the range of application of natural composites. The auto industry, in its constant quest for good mechanical properties materials which are developed with sustainability, has in composites with hybrid reinforcement a very viable alternative. In the present work, the nature Crown pineapple fibers and nature Crown pineapple fibers treated with alkaline solution were studied in order to evaluate the influence of chemical treatment in its properties. For this techniques were used x-ray diffractometry, Thermogravimetry and Infrared Spectroscopy (FTIR). Composites have been developed using polypropylene, reinforced with pineapple fibers and pineapple fibers hybrids/glass fibres, both with levels of 5 and 10%. These composites were analyzed by Thermogravimetry techniques and tested by traction. The realization of this work indicated that although the chemical treatment did not affect the thermal stability of the fibers, caused an increase in crystallinity index fibers and decreased its hydrophilic. The tests performed on composite indicated that the composites process was suitable because it provided good dispersion of the polymer matrix. The addition of natural fibers from the pineapple's Crown, in a proportion of 10%, provided the greatest increase in modulus of elasticity (27%) when compared to the pure polymer

Influências do Projeto Baja SAE no ensino da engenharia e no desenvolvimento do aluno

This work aims to show the importance of Baja SAE Project in engineering education, as well as the development of the student, being an outstanding tool for the engineering student has an education that meets the objectives of the pedagogical university and also the guidelines Ministry of Education curriculum for engineering courses. The Baja SAE Project provides the engineering students the chance to apply in practice the knowledge acquired in the classroom, to enhance their preparation for the labor market. The student becomes involved with a real case of project development, from concept design, detailed design and construction. The Baja SAE Project redefines the position of the student as an active element in the learning process engineering, leaving behind the simple condition of receiving information. Values procedures that provide students the opportunity to learn in contexts of professional practice, while offering the opportunity to contextualize the execution of a project. From an analysis to develop personal skills, Baja SAE Project has its own characteristics and essential for professional practice, however, not specific to the engineering course. For example, capacity for teamwork, communication skills written and oral, ethical behavior, critical, overview, entrepreneurial spirit, leadership, etc

Estudo e caracterização térmica da curcumina e de uma forma polimórfica

This paper was prepared a polymorphic from of curcumin a natural bioactive compound widely used in Indian medicine in the treatment of a range of illnesses. The preparation was the polymorphic crystallization process and solvent mixtures of organic solvents in order to change the dielectric constant of the solution to obtain crystals. The crystal of curcumin has been studied and characterized by absorption spectroscopic in the infrared, X-ray diffraction powder method and by thermo analytical techniques: thermogravimetry and differential therma analysis (TG-DTA) and differential scanning calorimetry (DSC). The DSC of the pure compound (MP=180,19ºC) showed some differences compared the compound crystallized (MP=176.63ºC) in a mixture of solvents thus indicating the phenomenon of polymorphism, and TG-DTA curve of the compound crystallized showed that this was not a solvatomorphic. Finnally the techniques of X-ray diffraction technique FTIR and powder showed a structural change in the compound crystallized, profile-based graphics when compared to the pure compound, which proves that the compound crystallized it is a polymorph

Análise preliminar para a estimativa da perda de calor sensível de um fluido homogêneo térmico em um reservatório de geometria cilindrica

This work analyzed the loss of sensible heat from one fluid to be considered homogeneous heat distribution on a thermal reservoir with cylindrical geometries composite insulating layers. We studied two thermal reservoirs with a volume of 20 liters, and the first has a layer thickness of 75 mm of expanding polyurethane foam wrapped in the polycarbonate container and the second container has only layer thickness of 5 mm of polycarbonate, as insulation of fluid of the external environment. The experimental results are compared with theoretical results obtained through a calculation script, displayed and detailed during the work development, from the theory of energy balance. The maximum error introduced between the theoretical and experimental results were 3.5% and 1.4% respectively for the Boilers with or without a polyurethane coating

Modelagem e avaliação de um sistema de refrigeração por absorção para residências e instalações de pequeno porte

This work presents a study of the absorption refrigeration system and the modeling and evaluation of two cycles using the binary solutions water-lithium bromide and ammonia-water for an equipment to be used in small size plants like residences. The study and evaluation aims the complete understanding of all parts of the system and the influence of each one of them as well as the spread of the knowledge to raise the use of this type of equipment in all sizes in order to decrease the energetic consumption of plants of all scales and making viable the alternative sources. The study is done in each element of the cycle separately and in some auxiliary equipments required in the operation such as the main power source, the solar collector. The software used for modeling, with emphasis on thermal part, was the EES (Engineering Equation Solver), that permitted the thermal balance calculus and acquisition of the used fluids properties. The results obtained for the equipment shows the system is more complex than the widely used in business, however, it can be viable and represents an alternative to increase the energetic efficiency

Estudo de cargas térmicas de uma aeronave e dimensionamento de um sistema de ar condicionado

This work deals with the thermal load study of a fictitious aircraft as well as scaling, in terms of the airflow and temperature of the air conditioning system, for heating and cooling of the its internal environment, aiming the thermal comfort of occupants. The first part is presented the techniques and methods utilized for modeling different heat exchanges that occur in the aircraft and then allowed to calculate the total heat load and the airflow and temperature necessary to comply with the requirements of the thermal comfort. Techniques to determine the basic parameters, as convection coefficient and global coefficient of heat exchange, are also presented. The work aims to develop a program, using a computational tool, to automate the calculations so that facilitate this study. It also allows to be used for other airplanes just changing parameters and the control variables related to the specific project. Finally the program performs calculations for a fictitious airplane, to analyze its functionality and the influence of parameters involved in the temperature controls. The program allowed analyzing the sensitivity of portions of the thermal load and the corresponding parameters of influence, as well as the scaling of the air conditioning in terms of airflow and temperature. It was considered, despite the simplifications, a good approximation to the actual values and then can be used in development of the other airplanes

Estudo de um ciclo de vapor utilizado para tratamento de superificies metálicas: estudo preliminar de caso

The use of heat in parallel with relative low temperatures and applied to several areas of the industry is essential for the main manufacturing processes, like drying, dehydrating, concentration, annealing, production of chemical reactions, and microbiological sterilization. Without neither the heat nor the coming of a great quantity of thermal heat, with high quality, there would not be the “modern society”, with its high standards of living plus its high consumption levels; from services to goods in general. Within an almost absolute way, the heat flows are obtained from vapor systems. Thus, in this work we are going into the operation of a vapor system, composed of two firetube boilers dimensioned to supply vapor for three processes. However, with the transfer of one of the processes to another plant, the system got over-dimensioned. But, taking advantage of this scenario, the two boilers were used to supply vapor to further processes, causing their intermittent usage. Moreover, the operational alternative adopted by the maintenance engineering of the plant for a creating a solution has been presented; both the positive points and negative ones were disclosed, likewise the possibility of improvement points

Estudo de melhorias dos painéis de baixa tensão da Faculdade de Engenharia de Guaratinguetá - UNESP

The protection and distribution systems for the electrics equipments are really important for the safety of products, process and final users, for an enterprise or even for a residence. For that, it’s necessary the utilization of low voltage switchboards for controlling the feeding of a charge, avoiding any kind of abnormality that can eventually occur. It’s necessary to pay attention in the cubicles conditions, and always verify if they are in accordance to the norms of the product, verifying also any kind of physical damage for the operator and/or users. In this line, the present graduation work analyses the low voltage switchboards in the college, checking if they are attending the actual standards, suggesting some improvements and later making a simulation of the creation of a new panel that reach all the needing in substitution of this actual, through the software Simaris. Using the research and lecture of norms and regulations for verifying the problems, this way we could register the greatest acting failures. These actions are made for becoming aware to the university about the danger in using electrics equipments without a minimum degree of protection, allowed by the law, and attempting to the urgency in changing this fails