Análise comparativa da rugosidade superficial de resinas compostas de alta densidade

The success achieved by the use of composite resins in anterior teeth precipitately leads their use in posterior teeth. However, the indiscriminate application of these materials in cavities with several diverse sizes rapidly pointed out their lack of resistance to oclusal and proximal wear. OBJECTIVE: To evaluate the surface roughness of composite resin in relation to finishing and polishing technique. MATERIAL AND METHODS: Eight experimental groups (n = 15) were divided according to finishing and polishing technique: G1 – Z250TM composite resin without surface finishing and polishing; G2 – Z250TM composite resin plus surface finishing and polishing; G3 – P60TM composite resin without surface finishing and polishing; G4 – P60TM composite resin plus surface finishing and polishing; G5 – Prodigy CondensableTM composite resin without surface finishing and polishing; G6 – Prodigy CondensableTM composite resin plus surface finishing and polishing; G7 – SurefillTM composite resin without surface finishing and polishing; G8 – SurefillTM composite resin plus surface finishing and polishing. Three packable and one microhybrid (control group) composite resin was used. The surface roughness was measured using a profilometer at three points in each sample. The results were evaluated by ANOVA and Tukey test (p < 0.05). RESULTS: Prodigy CondensableTM composite resin showed the lowest surface roughness, while SurefillTM showed the highest surface roughness. Comparing the resins used, only between P60TM and SurefillTM there were no statistically significant differences (p > 0,05). CONCLUSION: Surface roughness was lower in all types of resin composites surfaces in contact with Mylar matrix strip than in areas submitted to finishing and polishing procedure.

Centrifugação de espermatozóides ovinos em gradiente de densidade contínuo: efeito sobre a taxa de prenhez e proporção do sexo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência de diferentes dietas na densidade óssea de calopsitas (Nymphicus hollandicus)

Pós-graduação em Ciência Animal - FMVA

Composição lipídica da carne de frango em função da densidade nutricional da ração

Pós-graduação em Ciência Animal - FMVA

Densidade de estocagem e restrição alimentar em juvenis de piapara

The effects of stocking density and food restriction in juvenile piapara (Leporinus elongatus) were studied by two experiments. In the first, 88 piaparas juveniles were stocked in three densities (0.13, 0.20 and 0.40 fish L-1) for 70 days. Were evaluated: weight gain, average consumption, specific growth rate and feed conversion. The experiment was conducted in completely randomized design with three treatments (0.13, 0.20 and 0.40 fish L-1) and four replicates. In the second experiment, 84 fish were divided into three treatments (RBD, with 4 replicates): control group (daily food); FDS group (animals fed on weekends) and Res 21 group (animals subjected to food restriction for 21 days). Highest stocking density resulted highest biomass produced. Fish subjected to food restriction for 21 days and animals fed on weekends group, displayed full compensatory growth.

Desenvolvimento inicial e densidade de estocagem de larvas de Aracu-riscado, Leporinus agassizii (Characiformes: Anostomidae)

Pós-graduação em Aquicultura - FCAV

Aquisição de densidade mineral óssea e prática de modalidades esportivas de combate em jovens

Pós-graduação em Ciências da Motricidade - IBRC

Compósitos preparados a partir de resíduo industrial de couro com elastômeros termoplásticos obtidos através de blendas de polietileno de baixa densidade e borracha natural

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Produção e qualidade de inflorescências de couve-flor em função da densidade de plantio

Cauliflower is one of the most planted vegetable throughout Brazil, being a very profitable crop. The use of denser plantings can increase crop yield and improve financial returns to producers. This study aimed to verify the combination effect of different spacing between plants in row and between rows on the cauliflower 'Piracicaba Precoce’ inflorescences productivity and quality. In the experiment, a randomized block design was used and treatments consisted in three distances between rows (70, 80 and 90 cm) with three distances between plants in row (50, 60 and 70 cm) and four replications. Total productivity and productivity by inflorescences size classes were assessed as well as the quality by checking the inflorescences’ mass. The row density did not change the produced heads quality, although the density between plants reduced the inflorescences size. The spacing 70 x 50 cm, totalizing 28,571 plants per ha, due the higher productivity, greater than 14.0 t ha-1 , and still not compromise the inflorescence size can be recommended to the cauliflower "Piracicaba Precoce” production in the region.

Efeitos da administração em longo prazo do omeprazol sobre a densidade mineral óssea e as propriedades mecânicas do osso

Objectives: Epidemiological studies have shown a relationship between long-term use of proton pump inhibitors and bone metabolism. However, this relationship has not yet become established. The aim of the present study was to analyze the mechanical properties and bone mineral density (BMD) of rats that were subjected to long-term omeprazole use. Methods: Fifty wistar rats weighing between 200 and 240 g were divided equally into five groups: OMP300 (omeprazole intake at a dose of 300 moL/kg/day); OMP200 (200 moL/ kg/day); OMP40 (40 moL/kg/day); OMP10 (10 moL/kg/day); and Cont (control group; intake of dilution vehicle). The solutions were administered for 90 consecutive days. After the rats had been sacrificed, their BMD, the mechanical properties of the dissected femurs and their serum Ca++ levels were analyzed. Results: The BMD of the OMP300 group was lower than that of the controls (p = 0.006). There was no difference in comparing the OMP200, OMP40 and OMP10 groups with the controls. The maximum strength and rigidity of the femur did not differ in the experimental groups in comparison with the controls. The OMP300 group had a statistically lower serum Ca++ concentration than that of the controls (p = 0.049), but the other groups did not show any difference in relation to the controls. Conclusion: Daily intake of 300moL/kg/day of omeprazole decreased the BMD of the femur, but without changes to the rigidity and strength of the femur in adult rats. © 2

Densidade, seleção de micro-habitat e distribuição de Phylloscartes eximius (Aves: Tyrannidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Densidade mineral óssea, exercício físico no lazer e composição corporal em mulheres pós-menopausa: estudo com usuárias do Sistema Único de Saúde

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Degradação de geomembranas de polietileno de alta densidade (HDPE) após exposição à intempérie e lixívia

This paper presents some results of MFI and OIT tests performed on HDPE geomembranes of 0,8 and 2,5 mm that were exposed to weathering effects and leachate after 30 months (2,5 years). The aim of this work is the evaluation of the oxidative degradation process by comparison of fresh and exposed samples results. The expositing and tests were performed according the following standards recommendations: ASTM D1435 (weathering), ASTM D5747 e D5322 (leachate), ASTM D1238 (MFI) e D3895 (OIT). The results shows, for instance, that the MFI values presented high increases on the HDPE (2.5 mm) showing that polymeric chain break occurred for both exposures and, therefore, oxidative degradation. Concerning the OIT values all the geomembranes presented very low values even in the fresh samples. This demonstrates that there wasn’t an antioxidant package appropriate for these membranes.

Uso da cromatografia gasosa para avaliação da difusão em membrana de Polietileno de Alta Densidade (pead) em contato com hidrocarboneto

The constant petrol fuel leak in gas stations has caused concern in many countries around the world. Those fuels have toxic organic compounds in their composition, like Polycyclic Aromatic Hydrocarbons (PAH), which are harmful to the human health. In this work the efficiency of the protection layer with a High Density Polyethylene (HDPE) membrane of 2.5 mm thickness was evaluated. The study was based in the diffusive process in the intact membrane by a permeameter developed to evaluate the diffusive process. The membrane was putted in the middle of the system to separate two sides: a local soil impregnated with diesel oil (in one side) and pure water (in the other side). The chromatography technique was conducted to evaluate the contamination in the pure water. The analyses were made monthly in a total period of 6 months of research. The results tests show that the membrane was less effective to antracene and naphthalene compounds. Despite that, the results showed that the HDPE membrane is a good alternative to prevent contamination of water and soil by the compounds under study up to one year, based on the performance in the time of study.