Gráficos de controle de Shewhart: Duas década de pesquisa

Esta tese apresenta, de forma compacta, os trabalhos mais importantes do autor, que são frutos de uma pesquisa de vinte anos sobre gráficos de Shewhart. O autor estudou os modelos que descrevem o tipo e o instante de ocorrência das causas especiais, propôs novos esquemas de amostragens e estatísticas de monitoramento. Mais recentemente, vem avaliando a capacidade dos gráficos de controle em sinalizar causas especiais quando as observações são autocorrelacionadas e propondo novas estatísticas para o monitoramento de processos mutivariados.

Aproveitamento de resíduos de laminação da madeira para a produção de painel estrutural

Products derived from wood or engineered products are becoming interesting alternatives to the replacement of solid wood in various applications, from structural components to the furniture industry and packaging. Among these products, there are panels built by strands, particles and fibers, each one having their particular characteristics and potential of use. Since the different types of panels are produced, waste generation is part of the process, and that more technological it is, it still generates losses of raw materials. Based on the need for rational use of raw materials and using almost full of industrially processed wood, It arises the proposal of this work, which seeks to use waste from the lamination, like pieces of strands, broken strands, strands rough, cracked strands to produce panels with structural characteristics of the OSL panel (Oriented Strand Lumber), LSL (Laminated Strand Lumber) and OSB (Oriented Strand Lumber). Besides the use of waste, this paper seeks an alternative to the use of the adhesive, because the industry uses formaldehyde-based adhesives, which over the press, they emit large amounts of formaldehyde, which is very aggressive to humans and environment. The panels made with polyurethane resin based on castor oil and hot-pressed were characterized by physical and mechanical tests according to specifications of European Standard (EN). High values of tensile strength, elastic modulus and density were found in the results of tests. Adding to stable values of swelling and moisture content, the panel studied adds attractive features to the panel market, especially in the civil construction

Simulação e controle de um quadcopter utilizando lógica fuzzy

The present work develops a model to simulate the dynamics of a quadcopter being controlled by a PD fuzzy controller. Initially is presented a brief history of quadcopters an introduction to fuzzy logic and fuzzy control systems. Afterwards is presented an overview of the quadcopter dynamics and the mathematical modelling development applying Newton-Euler method. Then the modelling are implemented in a Simulink model in addition to a PD fuzzy controller. A prototype proposition is made, by describing each necessary component to build up a quadcopter. In the end the results from the simulators are discussed and compared due to the discrepancy between the model using ideal sensor and the model using non-ideal sensors

Utilização de 5S, Kanban e Layout para a melhoria do controle de estoque em um varejo de materiais para construção

Many small businesses suffer from a lack of control of goods stored. This lack of control affects other areas of the company as purchase, that can’t buy material in an advanced and accurated way. It also affects services provided by the company, especially when it is a store because for sell something it is necessary to have the material in the right time. Futhermore, the business isn’t able to identify obsolete items in stock, theft and vandalism, loss or damage to materials. All of these disorders can be converted into financial losses that make much difference to a small business that needs to remain competitive in the market facing the giants while generating a profit that allows it to invest in their growth. Therefore, any unnecessary expense is exceedingly harmful and any savings already differentiates it from other companies of similar size. This study deals with the application of production engineering tools as 5S, kanban and layout in a building materials retail to tackle problems that prevent this company to have a stock organized and accurated. Finally, we recorded gains that the company reached with the implementation of part of the solution proposed

Análise da vibração para o controle do funcionamento de um ventilador de um sistema de exaustão

This work has as objective to show the vibrational analysis as a method of predictive maintenance as an auxiliar procedure in the fail detection in equipments, most specifically in the rotative ones, and with that help the maintenance team to have conditions to foresee the right time to do the swap of the components of the systems, what would lead to failures. Knowing the exact moment the resources of people and money can be focused in the critic operations to the plant. This technic has been already studied for more then 30 years and was widely used in this work, not only as an equipment condition verification method, but also, after the equipment replacement, was used to prove that the new fan was operating under the best work conditions and with that maintenance could return to contol the vibration level of the equipment, not being necessary any kind of intervention

Desenvolvimento de experiências de acionamento e controle do movimento angular de motores de indução trifásico

This paper aims to show practical and effectiveexperiencesfor lessons Industrial Automation Laboratory taught inundergraduate degreein ElectricalEngineering from the University Júlio MesquitaFilho - UNESP, Guaratinguetá. Experiments carriedsimulatecontrol and drive systems of electric three phase induction motors (MIT)widely usedinindustries. The experiments simulate a manufacturing environment where there isa need to control the activation and continuous operation ofelectricmotors. Seven experimentsthat simulatethe firing of electrical motors through a controlsystem, a driver along with asimulator loads coupled to the electric motor was developed. Experiments usinga Programmable Logic Controller (PLC) as acontroller,an inverter frequencyasdriver, and MagneticBrake, as simulatorengine loads . The experiments were divided accordingto the speed reference signal used fordrivingand operating the electric motor: digital and analog. The first five experiments performing the drive control and operation of the electric motor via digital signals. The sixth and seventh experiments using an analog signal as a reference speed for the electric motor

Controle de velocidade de um motor de indução trifásico usando técnicas de ajuste empírico para bancada de teste no laboratório de automação

This work aims to make the closed loop control of a three phase induction motor, through the integration of the following equipment: a frequency inverter, the actuator system; a programmable logic controller (PLC), the controller; an encoder, the velocity sensor, used as a feedback monitoring the control variable and the three-phase induction motor, the plant to be controlled. The control is performed using a Proportional - Integrative - Derivative (PID) approach. The PLC has a help instruction, which performs the auto adjustment of the controller, that instruction is used and confronted with other adjustment methods. There are several types of methods adjustments to the PID controllers, where the empirical methods are addressed in this work. The system is deployed at the Interface and Electro Electronic Control laboratory in the Universidade Estadual Paulista Júlio Mesquita Filho, Guaratinguetá, São Paulo, then, in the future, this work becomes an experiment to be conducted in the classroom, allowing undergraduate students to develop a greater affinity to the programs used by the PLC as well as studies of undergraduate and graduate works with the help of assembly made

Análise estrutural de Tie-Rod pelo método dos elementos finitos e através de cálculos analíticos

Currently one of the great concerns of the aeronautical industry is in relation to the security and integrity of the aircraft and its equipments / components when under critical flight maneuvers such as during landing / takeoff and emergency maneuvers. The engineers, technicians and scientists are constantly developing new techniques and theories to reduce the design time and testing, ir order to minimize costs. More and more the Finite Element Method is used in the structural analysis of a project as well as theories based on experimental results. This work aimed to estimate the critical load to failure for tensile, compression and buckling of the Tie-Rod, a fixture aircraft widely used on commercial aircrafts. The analysis was performed by finite element method with the assistance of software and by analytical calculations. The results showed that the Finite Element Method provides relative accuracy and convenience in the calculations, indicating critical load values slightly lower than those found analytically for tension and compression. For buckling, the Finite Element Method indicates a critical load very similar to that found analytically following empirical theories, while Euler's theory results in a slightly higher value. The highest risk is to fail by buckling, but the geometric irregularity of Tie-Rod pieces makes difficult the calculations, therefore a practical test must be done before validation of the results

Estudo da estabilidade dinâmica e controle da aeronave AF-X da equipe AeroFEG

The present work aims to study the stability and control of the aircraft AF-X of AeroFEG team for AeroDesign to contribute with it in developing its theoretical project report for the competition and present the shortcomings of stability that it might measures for the practical test. In the first moment, it was presented forces and motion of the aircraft, so to define the equations of motion. After the equations of motion were calculated, the transfer functions were found and the aircraft response was analyzed under longitudinal stability and lateral-directional. We obtained responses from the aircraft and through the method of Root Locus the gains required to improve responses and reduce the overshoot, finally some changes and improvements for increased stability have been addressed. The study covered all the motions and control surfaces of the aircraft, showing the characteristics and behavior of the front disruptions, as well as opportunities for gains and improvementsThe present work aims to study the stability and control of the aircraft AF-X of AeroFEG team for AeroDesign to contribute with it in developing its theoretical project report for the competition and present the shortcomings of stability that it might measures for the practical test. In the first moment, it was presented forces and motion of the aircraft, so to define the equations of motion. After the equations of motion were calculated, the transfer functions were found and the aircraft response was analyzed under longitudinal stability and lateral-directional. We obtained responses from the aircraft and through the method of Root Locus the gains required to improve responses and reduce the overshoot, finally some changes and improvements for increased stability have been addressed. The study covered all the motions and control surfaces of the aircraft, showing the characteristics and behavior of the front disruptions, as well as opportunities for gains and improvements

Estudo de caso de controle estatístico de processo: levantamento estatístico de defeitos em molduras

This graduate work approaches the study of Statistical Process Control - SPC, in a stage production of an industrial frame, aiming to use the tool of statistical process control (SPC) to assess the process capability. Where the process needs improvement as well not meet the specifications. Assessing the needs that the company needs to improve quality management, and the difficulties they present during the implementation of the CEP. The present study is to use the method of case study. The results are presented through study of the level of defects using Pareto diagrams and control chart by - (p) fraction defective, and checking the capacity and stability of the process using control charts and histograms XbarraR. The process demonstrated the need for improvements in process and quality management. At the end of the work are presented suggestions for improving the quality system of the company

Gestão ambiental aplicada a prevenção, controle e recuperação de erosão linear acelerada no município de Ipeúna-SP

The erosion is a natural process of detachment, transport and deposition of soil and rock particles from one place to another. Human activities with no previous planning may accelerate this process, causing several damages to the environment and to society. In order to control the acceleration of these erosion processes caused by humans, prevention and improvement initiatives emerge. Regarding works which interfere directly in some of the natural resources, these initiatives must respect the intrinsic physical properties of the area of interest, if they aim to obtain effective results. Based on this scenario, this work proposes a few methods of accelerated linear erosion prevention, control and recovery in a specific area of the municipal district of Ipeúna (SP). For that matter, this study is based on a method of physiographic compartmentalization of the area, considering and integrating soil, relief, geology and the use and land cover properties of the study area. Plus, a flowchart with general orientations regarding management of eroded areas was produced, focused on the control and recovery of linear erosion. The result demonstrates the importance of careful erosion control, respecting the physical properties of each physiographic unit. The vegetative and mechanical conservationists methods, and the discipline of water flow, have found wide applicability in the study area.

Estudo de melhorias dos painéis de baixa tensão da Faculdade de Engenharia de Guaratinguetá - UNESP

The protection and distribution systems for the electrics equipments are really important for the safety of products, process and final users, for an enterprise or even for a residence. For that, it’s necessary the utilization of low voltage switchboards for controlling the feeding of a charge, avoiding any kind of abnormality that can eventually occur. It’s necessary to pay attention in the cubicles conditions, and always verify if they are in accordance to the norms of the product, verifying also any kind of physical damage for the operator and/or users. In this line, the present graduation work analyses the low voltage switchboards in the college, checking if they are attending the actual standards, suggesting some improvements and later making a simulation of the creation of a new panel that reach all the needing in substitution of this actual, through the software Simaris. Using the research and lecture of norms and regulations for verifying the problems, this way we could register the greatest acting failures. These actions are made for becoming aware to the university about the danger in using electrics equipments without a minimum degree of protection, allowed by the law, and attempting to the urgency in changing this fails

Desenvolvimento de um anteprojeto de um sistema de digitalização da proteção e controle aplicada a uma subestação elétrica industrial de alta tensão

The proposed of scanning of an electrical industrial substation HV is associated with a segment of the Electrotechnical area and aims the study and preliminary application of digital technologies in the protection, control, measurement and automation maneuvers aimed at a Industrial Electrical System typical High Voltage. Well intended to supervision, protection and control of major electrical and thermal quantities involved in a substation, such as voltage levels, current, temperature, power factor, loads of transformers and circuit feeders, status of interlocking devices, switching equipment maneuvers, etc

Análise dinâmica e estrutural de virabrequim

This paper deals with static analysis and dynamic stress of an ensemble crank and crankshaft, contained within a combustion engine of 4 cylinders. Aimed to illustrate procedures for computer-aided analysis having as goal the optimization of components according to the need for the market demand. Thus, to work in static and dynamic analyzes were summarized the basic theory involved in the calculations and analyzes necessary actuation forces and held a brief introduction about the manufacturing process and forging. Subsequently, it was applied with the use of software in a case the crankshaft, to obtain the performance and structural dynamic thereof. There was a conservative result and critical points in the fillet of the crankshaft bearing, as well as for lubrication hole. It was concluded that there are possibilities for improvements in the manufacturing process and design optimization in order to provide lower criticality and a more robust part

Controle de qualidade em estruturas na construção civil

This work is to control the quality of the structures, procedures for addressing the assembly of the formwork, scaffolding and the frame of pillars, beams and slabs. He had also intended to show that the vibration of launch and concrete items are also important, if poorly implemented can undermine the structure. This work also shows that the mapping becomes essential if there is some problem in the concrete, where concrete was launched, could be identified. And finally check the product where the structure will be evaluated for how much their quality