324 resultados para tomato pomace
Resumo:
The heavy metals when linked to organic matter have a behavior in the soil that is still little known. This study aimed to evaluate the effect of sewage-sludge-based composts when incorporated in the soil, in relation to heavy metals availability. Five composts were incorporated using sugar-cane bagasse, sewage sludge and cattle manure in the respective proportions: 75-0-25, 75-12.5-12.5, 75-25-0, 50-50-0 and 0-100-0 (composts with 0, 12.5, 25, 50 and 100% sewage sludge). The experiment consisted of 6 treatments (5 composts and a control with mineral fertilization) in randomized blocks with a split-plot design. The control and the treatment of 0% sewage sludge received inorganic nitrogen (N). All the treatments received the same amount of N (8.33 g) K (5.80 g) and K (8.11 g) per pot. Tomato plants were cultivated in 24.0 L pots in a greenhouse in Jaboticabal, SP, Brazil. The concentrations of heavy metals were determined in the soil samples at day 0 after compost incorporation. The higher the sewage sludge doses, the higher heavy metal contents in the soil. Among extractants, Melhlich-1 extracted the highest amount of heavy metals, while DTPA extracted the lowest one. The residual fraction presented the highest heavy metal content, followed by Fe oxides crystalline and amorphous to Cu, Cr and Mn, and Mn oxides, and Fe amorphous to Zn, indicating strong associations to oxides and clays. There were significant positive correlations between Mn contents in the plant and Mn linked to Fe oxide amorphous and crystalline.
Resumo:
Solanaceous plants are widely distributed around the world and they are traditionally used as drugs for the treatment of cancer and herpes, and include familiar foods such as potato, tomato and eggplant and some berries popular in Brazil. As part of a program of research on pharmacologically active new molecules, the aim in this study was to assess the mutagenic effects of Solanum palinacanthum, known popularly as joá. The crude 95% ethanol extract and purified solamargine obtained from the fruits of S. palinacanthum Dunal were investigated by the Ames test, using the Salmonella typhimurium strains TA98, TA97a, TA100 and TA102 as test organisms, with and without metabolic activation. The concentrations tested ranged from 0.07 to 15.0 mg/plate for the crude ethanolic extract and from 1.25 to 5.0 mg/plate for the solamargine. The results showed a mutagenic effect of both the extract and the solamargine in the TA98 strain (without metabolic activation). The present study showed the potential mutagenicity and suggests confirming this effect in other models, before recommending their indiscriminate consumption by the population.
Resumo:
The present study aims to evaluate the effect of fungicides and antibiotics to control bacterial spot (Xanthomonas perforans) in tomato, and the activation of pathogenesis-related proteins. Hybrid tomato AP 529 was used to assess the severity of disease. The treatments consisted of spraying with acibenzolar-S-methyl, fluazinam, pyraclostrobin, pyraclostrobin + methiran, copper oxychloride, copper oxychloride and mancozeb + oxytetracycline, and inoculated and non-inoculated controls. After three days of treatment, all plants were inoculated with X. perforans (10 6 CFU / mL). Leaf discs were collected for assessment of peroxidase, polyphenol oxidase, β-1,3 glucanase, phenylalanine ammonia lyase and protease. The area under the disease progress curve (AUDPC) was calculated with the data of severity. All treatments had reduced AUDPC compared to the inoculated control. Fungicides acibenzolar-S-methyl, pyraclostrobin, and pyraclostrobin + methiran had more satisfactory results in reducing the severity of bacterial spot on tomato. The products based on pyraclostrobin together with acibenzolar-S-methyl induced enzymatic activities of peroxidase, polyphenoloxidase and β-1,3 glucanase, indicating that these products may be related to the induction of resistance to bacterial spot on tomato plants.
Resumo:
There is much information on the adequate soil water matrix potential for returning irrigation in conventional soil tillage systems; however there is not enough information on the best soil water matrix potential for no-tillage production systems. This work aimed to study the effect of five irrigation levels on yield, soluble solids, and fruit acidity of the Hypeel tomato, cultivated for industrial processing and cropped on no-tillage system in Yellow Latosol. The experiment was carried out on a randomized block design with five treatments and four replications. The treatments consisted in different soil water matrix potentials for returning irrigation (m at 13cm of soil depth): -15, -30, -45, -60 and -75 kPa. The results obtained showed that the soil water matrix potential of -28.5 kPa resulted in maximum yields for tomato crop; whereas the value of -50.8 kPa resulted in the maximum fruit soluble solids concentration.
Resumo:
The modern tomato production, either for fruit table production or for processing, has required quality seedlings, able to withstand environmental adversities after planting and maintaining the standard genotype productive. The aim of this study was to evaluate the effect of three concentrations of PBZ (0, 50 and 100 mg L-1) and two methods of application (seed treatment and watering seedlings) on seedling emergence and seedling production of tomato growth indeterminate. We adopted a completely randomized in a 2x3 factorial scheme with four replications. We evaluated the seedling emergence, the rate of speed of emergence, seedling height and diameter of hypocotyl and their absolute growth rate (TCA), leaf area, dry weight of shoots, roots and total, and reason leaf area (RAF). Results were subjected to analysis of variance and the mean levels of the factor methods of application compared by Tukey test at 5% and the mean levels of the factor concentrations subjected to regression analysis. The application of paclobutrazol via seedlings watering did not affect seedling emergence, significantly reduced the rate of seedling growth and, consequently, the size of the seedlings without affecting the diameter of hypocotyl, plus allow accumulation of dry roots. A concentration of 50 mg L-1 was shown to be sufficient to obtain seedlings more compact, subject to leaf area, the application via watering, beyond allowing an increase of about 37% in dry weight of roots.
Resumo:
The tomato cultivation in the greenhouse has been expanded in the last years, mainly, in the South and Southeast regions of Brazil, whose purpose is to improve the productivity and the quality of the agricultural products, offering regularity in the production. The present study aimed to determine, along the crop cycle, the relationship between the leaf area index and the productivity, and at the end of the cycle, the components of production of the tomato in the greenhouse. The models were generated through polynomial equations of 1st and 2nd order, having as independent variable the number of days after the transplanting. It was verified that it is possible to determine, in the greenhouse, through mathematical models, the leaf area index of the tomato crop considering the days after the transplanting. Basing on values of leaf area index, the productivity of the crop and the period of the maximum productivity can be determined, aiding the farmers to determine the best sowing and transplanting time of the tomato crop.
Resumo:
As an additive in in vitro culture media, fruits have a great potential for facilitating economical orchid production because of lower technology requirements and the ease of obtaining raw materials to formulate culture media. We studied the in vitro growth of Cattleya bicolor Lindl. grown in a simplified culture medium supplemented with different kinds of fruit pulp. The experimental design was completely randomised, with eight seedlings per replication and ten replications per treatment, for a total of 80 seedlings per treatment. The culture medium was made using 150 g L -1 of pulp (without peel or seed) from the following fruits: ripe Santa Cruz tomatoes (Solanum lycopersicum L.), dwarf bananas (Musa cavendishii L.) of intermediate ripeness, light green chayote (Sechium edule (Jacq.) Sw), ripe papaya (Carica papaya L.) or green coconut (Cocos nucifera L.).The treatment control was MS 50 %. The treatments and the control were kept in a growth chamber for seven months before evaluating seedling survival percentage, shoot height, number of leaves, rooting percentage, root number, root length and dry masses of shoot and roots. The highest percentages of seedling survival were obtained using MS 50 %, banana and coconut medium. The seedling survival and rooting percentages illustrate that it is possible to emphasise the culture medium MS 50% and the culture medium supplemented with coconut on the most traditional culture medium with banana or tomato pulp. For the in vitro development of Cattleya bicolor Lindl., a simplified culture medium supplemented with coconut pulp is the most suitable for use as an alternative to MS 50%. A simplified culture medium supplemented with papaya pulp is not recommended for the in vitro development of Cattleya bicolor Lindl.
Resumo:
Purpose: This paper aims to evaluate the consumer acceptance of Bordô and Isabel wines from innovative winemaking in order to increase red wine consumption by consumers to obtain nutritional benefits. Design/methodology/approach: All wines were produced by a standard procedure of vinification. Pre-drying treatment aimed at drying the grapes up to 22°Brix and static pomace wines presented the constant contact between the must and pomace. Sensory acceptance was carried out by 80 consumers who evaluated eight samples (six experimental wines and two commercial wines) concerning the attributes: appearance, aroma, body, flavor and overall acceptance. Findings: Experimental wines presented higher acceptance when compared to commercial wines and cluster analysis shows the splitting of consumer preferences, highlighting the higher acceptance of traditional Bordô wine and static pomace samples in all sensory attributes. Pre-drying process enhances the concentration of coloured compounds, to highlight the appearance acceptance of these samples. Research limitations/implications: Although this paper has limited the consumer acceptance of red table wines, the innovative treatments will be applied in Vitis vinifera red wines. Practical implications: The wide acceptance of static pomace and pre-drying wines has promoted further information about innovative winemaking that can be applied in Brazilian and worldwide wineries. Social implications: The innovative treatments can change sensorial features of wines and therefore influence the choice of consumers as well as enhancing the nutritional benefits of red wines. Originality/value: The pre-drying and static pomace winemaking are the novelty of this study and the wide acceptance of the sensory attributes concerning these treatments indicates the potential for application in wineries. © Emerald Group Publishing Limited.
Resumo:
Insecticide potential and efficaciousness of vegetal extracts concentrations from six botanic families in three different modes were analyzed on the nymphs of the silverleaf whitefly Bemisia tabaci (Genn. 1889) on a tomato plantation Lycopersicon esculentum Mill. Nymph breeding was kept in cherry tomato shrubs. Test solutions were obtained from successive extractions with ethanol and evaporation in a rotary evaporator. Tests consisted of 10 solutions in four concentrations (500; 1,000; 1,500 and 3,000 μg/mL) and control treatment (distilled water + 1% DMSO) under three different modes of activity, namely, contact, translaminar and systemic. Experimental design was totally randomized with four repetitions and eleven treatments. Means were compared by Scott-Knott test at 5% probability and lethal concentrations (CL50) were calculated by POLO. In the case of contact activity mode, all extracts had efficiency above 50% with the highest concentration (3,000 μg/mL) in which the highest efficiency for all extracts tested was verified. There was a need for dose increase in translaminar activity mode for similar results, whereas in the case of systemic activity the best performance was obtained with extracts of Nerium oleander, Derris amazonica and Ipomoea carnea. Extracts of the last two caused a higher percentage when compared with that of other extracts in all activity modes lower than CL50.
Fusarium solani f. sp. passiflorae: A new forma specialis causing collar rot in yellow passion fruit
Resumo:
The aim of this study was to characterize a Fusarium population obtained from yellow passion fruit (YPF) with collar rot using pathogenicity, morphocultural characteristics and molecular tests. Pathogenicity and disease severity were assessed in six plant species: YPF, zucchini, tomato, bean, soya bean and cucumber. Potato dextrose agar medium (PDA) was used to determine mycelial growth at five temperatures (15-35°C). The colour produced by isolates was also determined on PDA at 25°C. Synthetic nutrient agar medium was used to evaluate: (i) type of mycelium and phialides; (ii) size, shape and number of septa from conidia; and (iii) production of chlamydospores and perithecia. Molecular tests consisted of sequencing the ITS-5·8S rDNA region and elongation factor 1α (EF-1α) gene. The isolates caused large lesions on YPF, zucchini and tomato, with YPF having the highest mean disease severity and being the only one that showed wilt symptoms and death of the plant. Thus the isolates showed host specificity. Maximum mycelial growth occurred at 25°C and the predominant colour was bluish-white. The isolates produced long phialides, dense aerial mycelium, oval microconidia with a mean size of 9·5 × 2·6 μm, macroconidia of 32·7 × 3·4 μm with 3·3 septa, and chlamydospores; only one isolate lacked perithecia. Phylogenetic trees of the ITS region and EF-1α gene showed that isolates from YPF formed a distinct group within the F. solani group and the formae speciales of F. solani. It is proposed to name all isolates from YPF as F. solani f. sp. passiflorae. © 2013 British Society for Plant Pathology.
Resumo:
Fungi constitute an important part of the soil ecosystem, playing key roles in decomposition, cycling processes, and biotic interactions. Molecular methods have been used to assess fungal communities giving a more realistic view of their diversity. For this purpose, total DNA was extracted from bulk soils cultivated with tomato (STC), vegetables (SHC), and native forest (SMS) from three sites of the Taquara Branca river basin in Sumaré County, São Paulo State, Brazil. This metagenomic DNA was used as a template to amplify fungal 18S rDNA sequences, and libraries were constructed in Escherichia coli by cloning PCR products. The plasmid inserts were sequenced and compared to known rDNA sequences in the GenBank database. Of the sequenced clones, 22 were obtained from the SMS sample, 18 from the SHC sample, and 6 from the STC sample. Although most of the clone sequences did not match the sequences present in the database, individual amplified sequences matched with Glomeromycota (SMS), Fungi incertae sedis (SMS), and Neocallimastigomycota (SHC). Most of the sequences from the amplified taxa represent uncultured fungi. The molecular analysis of variance (AMOVA) indicated that fluctuations observed of haplotypes in the composition may be related to herbicide application. © 2013 Silvana Pompéia Val-Moraes et al.
Resumo:
The objective of this study was to evaluate the association between the physicochemical properties and sensory acceptance of Brazilian red wines by applying chemometric techniques. Therefore, three winemaking processes were carried out: a traditional winemaking process and two novel winemaking processes, pre-drying and static pomace. Significant differences could be identified amongst the physicochemical properties of the wines (P<0.001). The sensory results showed greater acceptance of the wines made after pre-drying of the grapes or from the static pomace, as compared to commercial brands. Cluster analysis and Multidimensional Scaling were successfully applied and their results demonstrated the influence of the total phenolic content and color indexes on acceptance of the appearance of the wines. The odor was associated with the alcohol content, acidity, dry extract, total and reducing sugars and the body of the wines. The flavor was associated with several physicochemical properties which influenced the overall acceptance of the samples. © 2013 Elsevier Ltd.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)