Weed seed-germination .3. bidens-pilosa L

The germination of seeds of Bidens pilosa L. colected at different places was analyzed by dose-response curves for induction and reversion of germination in seeds pre-incubated at 25 degrees C or 36 degrees C during 24 hours. Our results indicate that phytochrome is responsible for the control of seed germination id Bidens pilosa and the level of pre-existing active form of phytochrome (Pfr) above the threshold switch the seed to germinate in darkness.

Determination of the maximum force due to skull impact in fights between sheep of the Ovis aries species

The present article presents a means of determining the maximum impact force between two bodies from the determination of the involved impulse in the impact and the sound emitted by the shock of the bodies during this impact.It also presents a case study applied to the shock between the skulls of male sheep of the Ovis aries species. These animals do not possess horns and dispute the territorial leadership by fighting, during which the skull is used as a weapon of attack, similar to a battering ram.Initially, a revision of basic physics approaching the theory of impulse is made, which shows that the average force during an impact can be obtained by the quantity of movement of the bodies. In its turn, the quantity of movement is obtained through the average speed of approach and the mass of the bodies. The maximum force is obtained from the average force, using the approach of the Force X Time curve with the Sonorous Intensity X Time Curve.In order to study the case of a shock between two sheep, the mass of the bodies was obtained through direct weighing and the average speed of approach obtained indirectly through filming, thus making possible the calculation of the average force. The Sonorous Intensity X Time Curve was obtained through the recording of the sound of the impact during a filmed fight, with later manipulation through computer programs. With this data the maximum force exercised between the skull of the sheep during the impact was obtained, which will be used in later studies.

Popcorn (Zea mays L. var. everta) yield and yield components as influenced by the timing of broadcast flaming

Farmers are interested in producing popcorn under organic production systems and propane flaming could be a significant component of an integrated weed management program. The objective of this study was to collect baseline information on popcorn tolerance to broadcast flaming as influenced by propane dose and crop growth stage at the time of flaming. Field experiments were conducted at the Haskell Agricultural Laboratory of the University of Nebraska, Concord, NE in 2008 and 2009 using five propane doses (0, 13, 24, 44 and 85 kg ha(-1)) applied at the 2-leaf, 5-leaf and 7-leaf growth stages. Propane was applied using a custom-built research flamer driven at a constant speed of 6.4 km h(-1). Crop response to propane dose was described by log-logistic models on the basis of visual estimates of crop injury, yield components (plants m(-2), ears plant(-1), kernels cob(-1) and 100-kernel weight) and grain yield. Popcorn response to flaming was influenced by the crop growth stage and propane dose. Based on various parameters evaluated, popcorn flamed at the 5-leaf showed the highest tolerance while the 2-leaf was the most susceptible stage. The maximum yield reductions were 45%, 9% and 16% for the 2-leaf, 5-leaf and 7-leaf stages, respectively. In addition, propane doses that resulted in a 5% yield loss were 23 kg ha(-1) for the 2-leaf and 7-leaf and 30 kg ha(-1) for the 5-leaf stage. Flaming has a potential to be used effectively in organic popcorn production if properly used. (C) 2010 Elsevier Ltd. All rights reserved.

Potencial alelopático e levantamento do banco natural de sementes sob a copa de Copaifera langsdorffii Desf

the aim of this study was to evaluate the allelopathic effect of soil samples collected under the canopies of three specimens of Copaifera langsdorffii the germination of Lactuca sativa and survey the natural seed bank according to seasonality. To test the allelopathic effect was carried experiments of pre and post-emergence with seeds of L. sativa and to quantify the stock of seeds, soil samples were collected from three specimens at three distances from the stem (1, 2 and 3 m) and at three depths (0-5, 5-10 and 10-15cm) in the region of savanna in the dry and wet seasons. The samples tested in bioassay of pre-emergence no significant influence on germinability, mean germination time and mean germination speed, but showed a difference in the synchronism of germination, these data were independent of sampling station. In test for post-emergence was observed statistical difference in the parameters evaluate (length of primary roots and hypocotyls) in both seasons. To quantify the natural seed bank were macroscopic analysis of each soil sample with the help of stereoscopic microscope. The analysis of the natural seed bank showed a larger number of seeds in the 0-5cm and in distance of 2m for both seasons. The results suggest the presence of allelochemical substances in soil samples collected under the canopy of Copaifera langsdorffii.

Potencial alelopático de extrato etanólico de Anadenanthera macrocarpa e Astronium graveolens

The objective of this study was to evaluate the allelophatic potential ethanol extract of leaves of Anadenanthera macrocarpa (Benth.) Brenan (angico) and Astronium graveolens Jacq (aroeira) on the biomonitor germination of Brassica chinensis (Malaysia's cabbage) and Lactuca sativa (lettuce). For the test of allelopathy was the bioassay of germination of B. chinensis and L. sativa using solutions of ethanol extracts in different concentrations (5, 10 and 20 mg / mL) with continuous light for 11 days. The experimental and control groups were divided into the Petri dish containing 50 seeds of B. chinensis and L. sativa each. Were performed six replicates for each concentration of extract of leaves of A. macrocarpa and A. graveolens and the negative control (water). The rolling action of the treatments was performed by quantitative observation and monitoring of germination every six hours. The results show that the ethanol extract of A. macrocarpa and A. graveolens presents allelopathic potential, regardless of the concentration used, but with answers dose-dependent, and thus able to interfere directly in germination, average speed and time of germination biomonitor of B. chinensis and L. sativa.

Shear strength evaluation of composite-composite resin associations

Objective: The aim of this study was to investigate the shear strength between distinct associations of different commercial composite resins and their fracture modes.Methods: Nine composite-composite associations (n = 90) were prepared for shear strength evaluation and separated into the following groups: Z/Z (Filtek Z250 UD + Filtek Z250 A2); Z/ D (Filtek Z250 UD + Durafill VS A2); Z/S (Filtek Z250 UD + Filtek Supreme YT); C/C (Charisma OA2 + Charisma A2); C/D (Charisma OA2 + Durafill VS A2); C/S (Charisma OA2 + Filtek Supreme YT); H/H (Herculite XRV B2D + Herculite XRV B2E); H/D (Herculite XRV B2D + Durafill VS A2); H/S (Herculite XRV B2D + Filtek Supreme YT). Shear tests were carried out using universal mechanical test equipment with a load of 200 kgf and speed of 0.5 mm/min. Ultimate shear strength data (MPa) from all tested groups were submitted to analysis of variance (one-way ANOVA) and the Tukey test. The fractured surfaces of the test samples were visually evaluated by binocular stereomicroscope at 20 times magnification. Fractures were classified as either adhesive or cohesive or mixed.Results: The highest ultimate shear strength observed for composite-composite associations was found for the groups: Z/Z, C/S, H/H, H/S, Z/S and C/C. Those associations containing the Durafill resin were weaker than the others.Conclusion: Microparticle RBC associations presented lower shear strength than hybrid and/or nanoparticle RBC associations, once the only significant difference was found when the Durafill resin was involved. (c) 2008 Elsevier Ltd. All rights reserved.

Analysis of bone microarchitecture related to anthropometry in climateric women

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Germinação da semente e produção de mudas de cultivares de alface em diferentes substratos

The aim of this paper was to evaluate the effects of the combinations of substrata on germination and development of seedlings of lettuce cultivars. The experiment was carried out in a nursery, in Mato Grosso do Sul State University. There wend compared the following combinations of substrata: washed sand + earthworm humus (2: 1); manure bovine + earthworm humus (2: 1); Plantmax(R) + earthworm humus (2: 1); washed sand + Plantmax(R) (2: 1) and manure bovine + Plantmax(R) (2: 1), and three lettuce cultivars: Crespa sem cabeca, Americana Julia and Baba de Verao. The experimental design was entirely at random, in a 5x3 factorial outline, with four replications and 16 seeds perplot. There were considered for evaluation 10 central seedlings per plot. The characteristics evaluated were: germination percentage (%), index of germination speed (IVE) and dry mass of the whole seedling (g). For all the analyzed variables, the cultivars Baba de Verao and Crespa sem cabeca presented the best results. Manure + humus was the best substratum to obtain seedling with larger development (vigor), althout it did not increase IVE and germination percentage.

An AM1 semiempirical study of the mechanism of sintering for ZnO in the presence of water and carbon dioxide

AM1 calculations were performed for the absorption of H2O and CO2 molecules on the surface of model ZnO crystals. The absorption of isolated molecules of each species and the co-absorption of both compounds simultaneously were considered. It was found that the absorption of H2O near a site where CO; is already absorbed favors the process of sintering, in agreement with the experimental findings. This is explained by the formation of Zn(OH)CO3H bound to the surface, a more mobile species than the ZnO unit itself. The roundening of the grains observed in atmospheres containing dry CO2 but suppressed when H2O is present, is also explained by these calculations. After absorption of CO2, the rupture of one bond - so that diffusion of the ZnCO3 species on the surface is allowed - requires much less energy than the breaking of two bonds, necessary for ZnO migration. These facts explain why the speed of surface transport does not decrease in CO2 atmospheres while sintering is indeed slowed down. © 1994.

Electrical conductivity of soybean soaked seeds. I. Effect of genotype

During the period from October/92 to September/94 experiments were carried out at the Seed Laboratory, FCAV/UNESP, Jaboticabal, SP, Brazil, using soybean seeds of different genotypes in order to evaluate the effect of genotype on the electrical conductivity (bulk conductivity) of soaked seeds. Seed moisture content (105 ± 3°C, 24 h), standard germination (four 50-seed samples, paper towel, 30°C), and vigor-accelerated aging (42°C, 48 h) were first determined. Undamaged soybean seeds were soaked in deionized water (four 50-seed samples, 75 ml, 25°C, 24 h) and electrical conductivity (μmhos.cm+1.g+1) was measured. Significant differences in conductivity were observed among genotypes having the same pattern of germination and vigor. The results have showed that electrical conductivity can be significantly influenced by genotype.

Effect of Surface Treatments on the Bond Strength between Composite Resin and Acrylic Resin Denture Teeth

Purpose: This investigation studied the effects of 3 surface treatments on the shear bond strength of a light-activated composite resin bonded to acrylic resin denture teeth. Materials and Methods: The occlusal surfaces of 30 acrylic resin denture teeth were ground flat with up to 400-grit silicon carbide paper. Three different surface treatments were evaluated: (1) the flat ground surfaces were primed with methyl methacrylate (MMA) monomer for 180 seconds; (2) light-cured adhesive resin was applied and light polymerized according to the manufacturer's instructions; and (3) treatment 1 followed by treatment 2. The composite resin was packed on the prepared surfaces using a split mold. The interface between tooth and composite was loaded at a cross-head speed of 0.5 mm/min until failure. Results: Analysis of variance indicated significant differences between the surface treatments. Results of mean comparisons using Tukey's test showed that significantly higher shear bond strengths were developed by bonding composite resin to the surfaces that were previously treated with MMA and then with the bonding agent when compared to the other treatments. Conclusion: Combined surface treatment of MMA monomer followed by application of light-cured adhesive resin provided the highest shear bond strength between composite resin and acrylic resin denture teeth.

Changes in protein fractions, trypsin inhibitor and proteolytic activity in the cotyledons of germinating chickpea

The chickpea seed germination was carried out in 6 days. During the period it was observed a little variation on total nitrogen contents, however the non protein nitrogen was double. A decrease of 19.1 and 20.6% in relation to total nitrogen was observed to the total globulin and albumin fractions, respectively. The gel filtration chromatography on Sepharose CL-6B and SDS-PAGE demonstrated alterations on the distribution patterns of the albumin and total globulin fractions between the initial and the sixth day of germination suggesting the occurrence of protein degradation in the germination process.The assay for acid protease only appeared in the albumin fraction with casein and chickpea total globulin as substrates, whereas the former was more degradated than the latter, however the transformations detected in the protein fractions apppear indicated that others enzymes could be acting during the process. The trypsin inhibitor activity had a little drop after six day of germination indicating a possible increase on the digestibility of the proteins.

Friction and wear properties of functionally graded aluminum matrix composites

Aluminum matrix composites are currently considered as promising materials for tribological applications in the automotive, aircraft and aerospace industries due to their great advantage of a high strength-to-weight ratio. A superior combination of surface and bulk mechanical properties can be attained if these composites are processed as functionally graded materials (FGM's). In this work, homogeneous aluminum based matrix composite, cast by gravity, and aluminum composites with functionally graded properties, obtained by centrifugal cast, are tested against nodular cast iron in a pin-on-disc tribometer. Three different volume fractions of SiC reinforcing particles in each FGM were considered in order to evaluate their friction and wear properties. The sliding experiments were conducted without lubrication, at room temperature, under a normal load of 5 N and constant sliding speed of 0.5 ms-1. The worn surfaces as well as the wear debris were characterized by SEM/EDS and by atomic force microscopy (AFM). The friction coefficient revealed a slightly decrease (from 0.60 to 0.50) when FGM's are involved in the contact instead of the homogeneous composite. Relatively low values of the wear coefficient were obtained for functionally graded aluminum matrix composites (≈10-6 mm3N-1 m-1), which exhibited superior wear resistance than the homogeneous composite and the opposing cast iron surface. Characterization of worn surfaces indicated that the combined effect of reinforcing particles as load bearing elements and the formation of protective adherent iron-rich tribolayers has a decisive role on the friction and wear properties of aluminum matrix composites.

Effect of ceramic surface treatment on the microtensile bond strength between a resin cement and an alumina-based ceramic

Purpose: The objective of this study was to test the following hypothesis: the silica coating on ceramic surface increases the bond strength of resin cement to a ceramic. Materials and Methods: In-Ceram Alumina blocks were made and the ceramic surface was treated: G1 - sandblasting with 110-μm aluminum oxide particles; G2 - Rocatec System: tribochemicai silica coating (Rocatec-Pre powder + Rocatec-Plus powder + Rocatec-Sil); G3 - CoJet System: silica coating (CoJet-Sand) + ESPE-Sil. The ceramic blocks were cemented to composite blocks with Panavia F resin cement (under a load of 750 g/1 min). The cemented blocks were stored in distilled water at 37°C for 7 days and sectioned along the x and y axes with a diamond disk. Samples with an adhesive area of ca 0.8 mm 2 (n = 45) were obtained. The samples were attached to an adapted device for the microtensile test, which was performed in a universal testing machine (EMIC) at a crosshead speed of 1 mm/min. Results: The obtained results were submitted to ANOVA and Tukey's test. Mean values of tensile strength (MPa) and standard deviation values were: (G1) 16.8 ± 3.2; (G2) 30.6 ± 4.5; (G3) 33.0 ± 5.0. G2 and 63 presented greater tensile strength than G1. There was no significant difference between G2 and G3. All the failures took place at the ceramic/resin cement interface. Conclusion: The silica coating (Rocatec or CoJet systems) of the ceramic surface increased the bond strength between the Panavia F resin cement and alumina-based ceramic.

Polymer light emitting devices with Langmuir Blodgett (LB) films of a polyfluorene derivative

Polyfluorenes are promising materials for the emitting layer of polymer light emitting devices (PLEDs) with blue emission. In this work, we report on PLEDs fabricated with Langmuir-Blodgett (LB) films of a polyfluorene derivative, namely poly(9,9-di-hexylfluorenediyl vinylene-alt-1,4-phenylenevinylene) (PDHF-PV). Y-type LB films were transferred onto ITO substrates at a surface pressure of 35 mN m-1 and with dipping speed of 3 mm min -1. A thin aluminum layer was evaporated on top of the LB film, thus yielding a sandwich structure (ITO/PDHF-PV(LB)/Al). Current-voltage (I vs V) measurements indicate that the device displays a classical behavior of a rectifying diode. The threshold value is approximately 5 V, and the onset for visible light emission occurs at ca. 10 V. From the a.c. electrical responses we infer that the active layer has a typical behavior of PLEDs where the real component of ac conductivity obeys a power-law with the frequency. Cole-Cole plots (Im(Z) vs. Re(Z)) for the device exhibit a series of semicircles, the diameter of which decreases with increasing forward bias. This PLED structure is modeled by a parallel resistance and capacitance combination, representing the dominant mechanisms of charge transport and polarization in the organic layer, in series with a resistance representing the ITO contact. Overall, the results presented here demonstrate the feasibility of LEDs made with LB films of PDHF-PV.