Influence of seed particle frequency on the phase formation and on the microstructure of 0.88 PZN-0.07 BT-0.05 PT ceramic

The Pechini method as well as the simultaneous addition of seeds particles and dopant solutions of BaTiO3 (BT) and PbTiO3 (PT) were used to prepare the perovskite phase 0.88 PZN-0.07 BT-0.05 PT. To study the influence of seed particle frequency on the synthesis of the PZN ceramic, two ranges of seed particle size were used: the range from 30 to 100 nm, termed small seed particles (frequency of 10(15) particles/cm(3)); and the range from 100 to 900 nm, termed large seed particles (frequency of 10(13) particles/cm(3)). The crystalline nuclei size influenced the calcining process, the sintering process and the microstructure. Samples prepared with lower seed frequency displayed more amount of pyroclore phase, need higher temperatures for sintering and showed a more heterogeneous microstructure with poor dielectric properties. (C) 2000 Elsevier B.V. Ltd and Techna S.r.l. All rights reserved.

Effect of age on seed digestion in parrots (Amazona aestiva)

The objective of this study was to compare the capacity of adult (more than 3 yr old) and young (less than 1 yr old) true parrots to digest seeds that are normally included in their diet in captivity, particularly soybean, sunflower, and corn. All the seeds were offered for 5 d with an interval of 15 d between different diets. The seeds of soybean and corn were boiled for 15 min and soaked in water at ambient temperature for 12 h before being fed to the birds. There were no differences in the digestibilities of crude protein and fats (ether extract) among animals, but the digestibilities of dry matter and crude fiber by the adult animals were higher than those of the young ones. The digestibility of carbohydrate (nitrogen-free extract) by adult birds was higher only for sunflower seeds. It is concluded that the capacity of parrots to digest fiber may change according to the age of the animal. Since the digestion of fiber depends on the action of microorganisms, these results suggest that the colonization of the gastrointestinal tract is delayed or very slow in young parrots.

Removal of epulis fissuratum associated to vestibuloplasty with carbon dioxide laser

There have been numerous surgical techniques developed for removing the epulis fissuratum lesions in order to improve alveolar ridge contour and improving adaptation of full prostheses. Most of these techniques can cause postoperative complications, such as oedema, pain, difficulty in swallowing and jaw movements, haemorrhage, infections and slow placement of final prostheses. The use of carbon dioxide (CO2) laser for the surgical removal of epulis lesions has resulted in many significant improvements including convenient mucosa removal, no bleeding or need for sutures, and minimal postoperative pain and oedema. This study is of 15 cases of removal of extensive epulis with vestibuloplasty in the maxilla and mandible that was carried out with CO2 laser, with no postoperative complications, rapid healing, and excellent aesthetic and functional outcome, all of which allowed for more rapid placement of final prosthesis.

Immobilized cells of Acidithiobacillus ferrooxidans in PVC strands and sultite removal in a pilot-scale bioreactor

The biooxidation of ferrous ion into ferric ion by Acidithiobacillus ferrooxidans can be potentially used for the removal of H2S from industrial gases. In this work, Fe3+ ions were obtained through the oxidation of Fe2+ using the LR strain of At. ferrooxidans immobilized in PVC stands in a pilot-scale bioreactor, while H2S was removed in an absorption tower equipped with Rasching rings. At. ferrooxidans LR strain cells were immobilized by inoculating the bacterium in a Fe2+-mineral medium and percolating it through the support. After complete Fe2+ oxidation, which took around 90 h, the reactor was washed several times with sulfuric acid (pH 1.7) before a new cycle was started. Four additional cycles using fresh Fe2+ mineral medium were then run. During these colonization cycles, the time required for complete iron oxidation decreased, dropping to about 60 h in the last cycle. The batch experiments in the H2S gas removal trials resulted in a gas removal rate of about 98-99% under the operational conditions employed. In the continuous experiments with the bioreactor coupled to the gas absorption column, a gas removal efficiency of almost 100% was reached after 500 min. Precipitate containing mainly sulfur formed during the experimental trial was identified by EDX. (c) 2005 Elsevier B.V. All rights reserved.

Effect of pre-imbibition and osmoconditioning on seed-germination in Phaseolus-vulgaris L. under water-stress

The effect of osmoconditioning and controlled water sowing was analysed in seeds of Phaseolus vulgaris L. cv. carioca on germination under water stress conditions. The pre-sowing in water at low temperature to limit germination resulted in the increase in the tolerance to water stress. The osmoconditioning with PEG for 48 hours increased the tolerance of bean seeds to water stress of -0.51MPa. The osmoconditioning or controlled water sowing can be used as a practice to increase the tolerance of bean seeds to water stress before planting in the field.

Differences and similarities in the pore size distribution of soybean seed coats

In this work we apply the mercury porosimetry technique to determine the pore size distribution in soybean seed coats of different varieties. The analyses show that the porosity of soybean seed coats is different when seeds of different genotypes are compared. This result points the possibility of using pore size distribution to varietal discrimination.

Use of reduced concentrations of tetrazolium solutions for the evaluation of the viability of peanut seed lots

The possibility of reducing the concentration of the working solution used in the tetrazolium test for peanut seeds (Arachis hypogaea L.) with or without seedcoats was studied. Tetrazolium solutions of different concentrations (0.05%, 0.075% and 0.1%) were tested at the temperatures of 35 and 40 degrees C, for determining the time needed for the seeds to reach proper staining. The efficiency of the selected treatments in evaluating the viability potential of the seeds was determined by comparing the results of the tetrazolium tests with those obtained by standard germination (using sand and rolled paper towel as substrata) and seedling emergence in the field tests. Staining the seeds without seedcoat in 0.05% tetrazolium solution for three hours at 40 degrees C yielded efficient results. on the other hand, reduced concentrations can be employed in the staining process of seeds with seedcoat; however, this method requires a higher consumption of tetrazolium salt, longer staining time as well as a higher ability and availability of time for embryo evaluation, since the cross-cutting of seeds is much more difficult in the presence of the seedcoat and the occurrence of damage to the outer surface of the cotyledons cannot be determined.

The effectiveness of alumina powder on carious dentin removal

This study determined the size of aluminum oxide particles used in an air abrasion system that is able to remove carious dentin tissue with maximum preservation of sound structure. Thirty extracted and carious-free third molars were used in this study. The dentin sample was obtained by sectioning the middle of the crown longitudinal to the long axis of the tooth in a mesio-distal direction. One half of the crown corresponded to the sound dentin group (SD), while the other half was used to develop artificial caries, constituting the, carious dentin group (CD). The specimens were air abraded for 15 seconds. The SD and CD groups were each randomly divided into three subgroups (N=10) according to the particle diameter employed (27, 50 and 125 pm). The prepared cavity was perpendicularly cut in half, and the profiles of all hemi-fragments were observed using SEM microscopy. The cavity measurements were made using a modified cephalometric analysis. The 27, 50 and 125 pun aluminum oxide particles did not present selectivity in the removal of carious dentin. However, when using the air abrasive technique for carious dentin treatment, the use of 27 and 50 pun aluminum oxide particles is recommended, due to their capacity to remove less sound tissue than the 125 pun particles.

Embryology and seed development of Syngonanthus caulescens (Poir.) Ruhland (Eriocaulaceae-Poales)

The embryology and the seed development of Syngonanthus caulescens are presented. This species possesses: a bithecous and tetrasporangiate anther, with a four-layered wall, a conspicuous endothecium of the baseplate type, a secretory tapetum formed by uninucleate cells, successive microsporogenesis resulting in isobilateral microspore tetrads, spiraperturate and binucleate pollen grains, an orthotropous, pendulous, bitegmic and terminucellate ovule, with a micropyle formed only by the inner integument, a megagametophyte of the Polygonum type, with formation of an antipodal cyst, free-nuclear and starchy endosperm, a broad and bell-shaped embryo, operculate and endotestal seeds, a seed coat derived from the inner layers of both integuments, and tanniniferous endotegmen. These embryological aspects are characteristic not only for Syngonanthus, but for the whole family, with few differences between genera. Furthermore, the pollen grain of the spiraperturate type and the cystic arrangement of the antipodals in the megagametophyte are peculiar and very distinctive features of Eriocaulaceae within the other Poales (commelinids). (c) 2006 Elsevier B.V. All rights reserved.

Seed maturation and effect of temperature regime on Trema micrantha (L.) Blume seed germination

T. micrantha (L.) Blume (Ulmaceae), a common pioneer tree species in Brazil, is used in the restoration of degraded areas. The fruits are fleshy and indehiscent, with only one water impermeable seed. During the fruiting period, fruits of different colours are found at the same time on the same branch. This research aimed to correlate fruit colour with other physical indicators of seed maturity and to Verify the effect of temperature regime on seed germination. Collected fruits were separated in to green, green-red and red colour and for each of these maturation stages, size, moisture content and dry matter of both fruits and seeds were determined. Seeds were scarified with sulphuric acid and submitted to a germination test conducted at constant (20 degreesC, 30 degreesC and 40 degreesC) and alternating (20-30 degreesC, 30-40 degreesC and 20-40 degreesC) temperatures for 15 weeks. Seed germination percentage and speed were analysed after five weeks and the fmal percentage of germinated and Viable seeds after 15 weeks. Seed maturity is attained when the fruits are green-red. At this stage, moisture content was about 64% for fruits and 10% for seeds. Alternating temperature was required for seed germination and 20-30 degreesC was the best option. Most seeds had germinated after five weeks, providing mature seeds, acid scarification and alternating temperature were used.

Flowering phenology, nectary structure and breeding system in Corymborkis flava (Spiranthoideae : Tropidieae), a terrestrial orchid from a Neotropical forest

Flowering phenology, breeding system and nectary structure of Corymborkis flava (Sw.) Kuntze were studied in a fragment of the Atlantic Forest in south-eastern Brazil. The flowering period extended from March (end of rainy season) to early June and seed dispersal occurred from June to September (dry season). Flowering peak occurred mainly in April, with up to 34 open flowers per plant being observed. The yellow, odourless and tubular flowers lasted similar to 7.8 days. The flowers present a perigonal nectary located in the basal lateral parts of the labellum; this is the first report on the nectary location and characterisation in the Tropidieae tribe. At the pre-anthesis stage, cells of both secretory parenchyma and epidermis of the nectary are filled with compound amyloplasts. However, starch grains were not observed in these tissues in senescent flowers, indicating that these starch grains are hydrolysed and used as source of sugars for nectar production. The nectar accumulates between the cuticle and the outer periclinal wall of the epidermal cells before. owing out into the nectar chamber. C. flava is a self-compatible species and spontaneous self-pollination does not occur because of hercogamy. The high pollinia removal (0.80) and insertion (0.82) per flower, as well as the high natural fruit-set indicate an efficient natural pollination system. The present study contributes for the knowledge of the diversity of reproductive strategies and nectary structures in Orchidaceae.