489 resultados para retenção de nitrogênio
Resumo:
With technological innovations, such as irrigation, the bean has been grown by producers who have the most varied levels of technology that, in suitable times, allows the planting great success in grain yield. The aim of this study was to evaluate the response of the dry bean to different managements of irrigation and nitrogen fertilization with no-tillage system, in Aquidauana - MS, Brazil. The experiment was conducted at the Universidade Estadual de Mato Grosso do Sul (UEMS), with the soil of the area classified as Alfisol, using the bean crop "Perola" sown on June 30, 2007. The experimental design was a randomized block split-plot consisting of three blocks and two replications within each block. The plots were composed of three management of irrigation, by the Class A pan method, using Hargreaves-Samani equation, and management by tensiometry (-40 kPa), with water replacement of 16.5 mm for all irrigation plots. The subplots consisted on four rates of nitrogen fertilization (0; 50; 100 and 150 kg ha(-1)), in which the nitrogen source was urea. It was concluded that the irrigation management through the Class A pan and Hargreaves-Samani equation conduced to higher grain yields of bean, 3031.11 and 3005.02 kg ha(-1) respectively.
Resumo:
The objective of this work was to evaluate the effect of nitrogen sources and rates on maize nutrition and grain yield under no-tillage system in sandy soil. The experiment was conducted in a Typic Quartzipsamment, in the city of Cassilandia, State of Mato Grosso do Sul, Brazil. A completely randomized block design was used in a factorial array 3x4 with four replicates. Treatments consisted of three sources [urea, extruded urea with starch (Starea), and ammonium sulfonitrate with nitrification inhibitor of 3,4-dimethylpyrazole-phosphate (Entec (R) 26)] and four rates (0, 45, 90 and 180 kg ha(-1)) of nitrogen, applied in side-dressing when the plants presented four and six expanded leaves. The nitrogen source affected N, K, and S concentration in the leaf, but did not interfere in the components of production and maize grain yield. Nitrogen application like ammonium sulfonitrate promoted higher concentrations of N, K and S in the maize leaf in relation to the urea, especially in the larger rates studied. Side-dressing nitrogen fertilization increased the number of ears per plant, number of grains per ear and grain yield, grown under no-tillage system in sandy soil, independent of the used source.
Resumo:
The study aimed to evaluate the yield and fruit quality of papaya 'Sunrise Solo' as function of nitrogen and boron fertilization. The experiment had a randomized block design with four replications, two plants per plot with a single border. To make up the treatments, we used the experimental array Plan Puebla III, which set the rates for nitrogen (0.0 to 111.2 - 200 - 288.9 - 400 g plant(-1), and B (0.0 - 0.83 - 1.5 - 2.16 - 3.0 g plant(-1)), in a total of ten treatments. The addition of nitrogen increased the yield, average fruit weight and number of fruits per plant. The nitrogen and boron increased the diameter and length of the fruit, amount of seeds and content of soluble solids. The pH of the pulp decreased linearly with increasing doses of nitrogen and boron. It was observed a significant effect of N rates on the level of vitamin C.
Resumo:
The castor bean cultivation has a high demand for nitrogen, in addition, the efficiency of nitrogen fertilization in most cases is low, so that this essential nutrient is provided at the appropriate time. The objective was to study the time nitrogen application in castor bean hybrids under no-till system in off-season. The experiment was carried out in an experimental area located in Botucatu, São Paulo State, Brazil, for two growing off-seasons (2006 and 2007). The experimental design was a randomized block in split plot design, with four replications. The plots were constituted by two castor bean hybrids (Lyra/Savana in 2006 and Lyra/Sara in 2007). Six combination of times out rates (0-0, 0-100, 100-0, 30-70, 70-30, 50-50 kg ha-1 of N) side dressing nitrogen fertilization constituted the subplots. The N source used was ammonium nitrate, applied 20 days after emergence and 40 days after emergence. Measurements were carried out: dry matter production of shoots, nitrate and ammonium leaf, leaf analysis, yield components and nitrogen factor utilization. The highest grain yield was obtained to the hybrid Lyra with nitrogen fertilization. In 2006 the highest nitrogen utilization factor to the hybrid Lyra was obtained with the form 70-30 and in the 2007 with 50-50.
Resumo:
The aim of this study was to evaluate different dietary electrolyte balance (DEB) on the blood biochemical parameters, nitrogen balances and crude metabolizable energy of swine in the initial phase. Sixteen barrows were used, averaging 27.95 kg of initial weight, allotted individually in metabolic cages in a randomized blocks design with four treatments (DEB of 160, 208, 257 and 305 mEq/kg) and 4 replicates. The blood biochemical parameters analyzed were chloride, potassium, sodium and urea in blood. Urine pH was also evaluated, and the parameters evaluated in nitrogen (N) balance were N intake, fecal N, N excreted in urine, absorbed N, N retention, retained N/absorbed N and total excretion of N. The gross energy digestibility and metabolizibility coefficients were determined, and the respectives values of digestible and metabolizable energy. The values of urinary pH increased (P < 0.01) linearly with increasing levels of DEB, ranging from 6.90 to 8.03. The results for chloride, potassium and nitrogen balances of variables and gross energy were similar (P > 0.05) between the evaluated DEB. A linear increase (P < 0.01) was also observed for sodium concentrations in blood serum due to the increase of DEB, with values of 2.91, 3.03, 3.27 and 3.18 g/l, respectively for the different treatments. Urea levels in blood serum increased linearly (P < 0.01), with values of 26.21, 28.64, 34.32 and 32.89 mg/dl. It was concluded that increasing the dietary electrolyte balance, from 160 to 305 mEq/kg resulted in higher concentrations of urea and sodium in blood serum, and higher pH values in the urine of swine in the initial phase.
Resumo:
The authors looked for the verification of the fatigue of retentive clasps utilized on the removable partial denture. According to this, it was idealized and built on assay machine, that through movements, simulate the insertion and removal of the clasp for a pattern tooth, manufactured on cobalt-chromium which has all the preparation normally utilized to the correct confection of this type of prosthesis. It was utilized three different commercial alloys based on cobalt-chromium: L1-Biosil; L2-Steldent; L3-Duracron. It was utilized the T clasp of Roach, with was tested upon three different proportions among width and thickness: E1-1.7;E2-2.0 and E3-2.3 and was casted through two casting techniques: F1-oxygen-gas and F2-oxygen-acetylene. The clasps were tested on the machine, which allowed the reading of the number of insertion and removal cycles made until fatigue appeared. The obtained results were submitted to the statistic analysis and the authors concluded that: a) L3 (Duracrom) obtained the best results followed by L1 (Biosil) and finally L3 (Steldent); b) among the analyzed thickness, the best results were obtained by E3, followed by E2 and after this E1; c) form the casting techniques, F2 gave us the best results.
Resumo:
The authors tested the T clasp of Roach in three differents proportions among width and thickness: E1-1.7; E2-2.0 and E3-2.3, with a constant length of 15 mm. These clasps were casted with three cobalt-chromium alloys (L1-Biosil; L2-Steldent and L3-Duracrom), through two casting techniques (F1-oxygen-gas and F2-oxygen-acetylene). The fatigue of the clasps were verified by using and assay machine, that through movements, simulate the insertion and removal of the clasps for a pattern which were obtained from a premolar, prepared in a surveyor. This machine detect the fatigue of the clasps and count the number of cycles of insertion and removal realized. The obtained results of the interaction between the analysed factors, were submitted to the statistic analysis and the authors concluded that: a) the interaction of factors, Alloy x Thickness, Alloy x Casting Technique and Thickness x Casting Technique did not change the order of effects that the factors showed separately but gave rise to effects of different magnitude for any observed sense; b) the simultaneous interaction of the factors Alloy x Thickness x Casting Technique confirmed the superiority of the L3 alloy, the thickness E3 and the F2 casting technique.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The nylon bag in situ degradation thecnique was employed to study the ruminai degradability of the neutral detergent fiber and neutral detergent insoluble nitrogen of the corn silage and soybean meal in four rumen fistulated Nellore steers, averaging 36 months of age and 520 kg of liveweight. A randomized completelcs block experimental design was used, where the animals constituted the blocks. It was used diets with two levels of concentrate: 20 and 40%.The forage used in the diets was corn silage, and the concentrate ingredients were: soybean meal, cottonseed meal, corn grain and sorghum grain. The NIDN degradation rate of the corn silage and the soybean meal showed a decrease of 32,1% and of 46,0 % as a function of the higher concentrate level of the diet, but the effective and potential degradability of this fraction were not affected. Concerning to the NDF, the soluble fraction, potentially degradable and undegrable , were not affected by the increase on the diet concentrate level, but for the corn silage, there were 21,8% of reduction on the effective degradability of NDF. The use of lag time promoted higher degradability values for the studied fraction. The obtained values for some evaluated parameters, different from that assumed by CNCPS, showed the necessity of more data about brazilian used feeds, for model adjustments.
Resumo:
The objective of this research was to study the porosity, bulk density and retention of water of an Oxisol, located in the Northwestern region of Sn̄o Paulo state, Brazil. The soil was cultivated with Citrus sp., to which green manure was applied between rows for three years. Each of six species of green manure crops (Crotalaria juncea L., Mucuna deeringiana Steph. & Bart., Canavalia ensiformis L. DC., Cajanus cajan L., Lablab purpureum L. and Ricinus communis L.) were seeded for three years (1995, 1996 and 1997) between Citrus rows, plus a treatment with a mix of all six species and a control (natural regrowth af vegetation). The experimental design was a randomized complete block design, with four replications for each of the eight treatments. Water retention, microporosity, macroporosity, total porosity and bulk density were analyzed in the beginning (1995) and end (1997) of the experiment, at three depth ranges (0-0.10; 0.10-0.20 and 0.20-0.40m). We concluded that there were statistically significant differences for bulk density, macroporosity, total porosity and retention of water among the different soil depth ranges; there were no significant differences among treatments though.
Resumo:
A plantation of Eucalyptus urophylla, established in 1984 on a Quartzpsamment Soil, at Altinopolis, São Paulo State, presented in 1989 an medium increment of the cylindrical volume of the trees of 13.97 m 3/ha/year and also showed deficiency symptoms of potassium, calcium and magnesium. At 4.33 years after planting were applied two doses of nitrogen (0 and 10 g/tree of N), potassium (0 and 20 g/tree of K 2O) and of dolomitic lime (0 and 500 g/tree), combined in a randomized block design arranged in a factorial way (2 × 2 × 2), with four replications, in order to study the recuperation of the tree growth rate. Evaluations of the trees growth were performed at 4.33, 5.67, 6.75 and at 7.58 years when cutting the plantation was done. The soil fertility and leaf concentrations of N, K, Ca and Mg were analyzed before and after the application of the treatments. The accumulation and distribution of biomass and of these nutrients in the tree components and in the litter, and the economic studies referring to the volumes of wood were also evaluated 7.58 years after planting. Potassium fertilization increased the mass of potassium in stemwood, stembark, foliage, fruits and litter, but the increase was greater in foliage and in the stembark. Liming increased the mass of magnesium in stemwood, stembark, foliage and litter, but the increase was greater in the litter. There was no isolated effect of nitrogen fertilization. The growth rate of trees was recovered with the potassium application, which increased the mean annual increment (MAI) of cylindrical volume from 13.85 m 3/ha/year without fertilizer to 16.82 m 3/ha/year. At 7.58 years after planting, there was observed an effect of the N x K x dolomitic lime interaction in the wood production. In the absence of nitrogen and dolomitic lime, the application of potassium increased the real volume of 43% and there was a gain of US$ 86.79/ha.
Resumo:
The purpose of this study was to evaluate the effect of an intramuscular injection of prostaglandin, within the first hour post partum, on the incidence of retained fetal membranes in cows, at 8 and 12 hours post-partum. Eighty-two cows were used as controls and 82 were treated with 25mg of prostaglandin (LUTALYSE®, 5ml), in two different farms. Cows treated with PGF 2α released the placenta faster (P < 0.10) than cows in the control group (7.72±0.84 vs. 10.07±1.09h). The incidence of retained placenta with more than 8h post partum was 30.5% in the control group and 17.1% in the treated group (P < 0.05), and with more than 12h was 19.5% in the control group and 12.2% in the treated group (P < 0.10). Farm, body condition score and parity showed influence on retained placenta rates, whereas sex of calf and help during calving did not have influence. These data showed that prostaglandin treatment within the first hour post-partum is capable of reduce the incidence of retained placenta and may work as a preventive treatment.
Resumo:
The nitrogen is the nutrient required in greatest quantities by the bean crop and the response to its application depends on the applied N rate as well as the time of its application. The objective of this work was to evaluate yield components, grain productivity and physiological quality of bean seeds, affected by different nitrogen (urea) rates top-dressed at three crop growth stages. The experiment was conducted in no-till system. The treatments were constituted by 0, 40, 80, 120, 160, 200 and 240 kg ha-1 N top-dressed at V4-5, R5 and R6 growth stages, corresponding to 21, 32 and 38 days after plant emergence, respectively. Seed physiological quality was evaluated by germination and vigor tests. Nitrogen applied at different crop growth stages did not interfere on the yield components, but interfered on bean productivity. Maximum grain productivity was obtained with top-dressed 164 kg ha-1 N, independently of growth stage application. Seed physiological quality was not affected by the treatments, fitting in the category of seeds for commercialization.
Resumo:
The objective of the experiment was evaluating the development and production of turmeric, it was carried out at FCAV-UNESP, in Jaboticabal-SP, during 11/18/ 1999 to 7/18/2000, in randomized blocks, with three replications, factorial scheme 5 × 5. The factors evaluated were doses of N (0, 68, 136, 170 and 204 kg.ha-1) and doses of K2O (0, 92, 184, 230 and 276 kg.ha-1). The potassium doses influenced plant-mother's height significantly, answering lineally to the increment in the potassium fertilization. There was significant interaction between nitrogen and potassium on the number of leaves of the sons and total-plant. In the doses of 0 and 92 kg of K2O.ha-1 a lineal increase was observed in the number of leaves with the increment of the applied nitrogen. The potassium doses also influenced the foliar area of the sons and total-plant, reaching values of 3260 and 4971 cm2 per plant, respectively, for the application of 276 kg K2O.ha1. The number of sons had a lineal increment with the growing fertilization of potassium, contemplating on the dry mass of the aerial part of the sons. The production of rhizomes per plant wasn't influenced for the factors evaluated.
Resumo:
The designs of filters made by granular material or textile are mainly based on empirical or semi empirical retention criteria according to Terzaghi proposal, which compares particle diameter of the soil base with the filter porous spaces. Silveira in 1965, proposed one rational design retention criteria based on the probability of a particle from the soil base, carried by one dimensional flow, be restrained by the porous of the filter while trying to pass through its thickness. This new innovating theory, besides of being very simple, it is not frequently used for granular filters since the necessary parameters for the design has to be determine for each natural material. However, for textile this problem no longer exists because it has quality control during manufacturing and the necessary characteristics properties of the product are specify in the product catalog. This work presents one adaptation of the Silveira theory for textile filters and the step-by-step procedure for the determination of the characteristics properties of the textile products necessary for the design. This new procedure permits the determination of the confiability level of retention that one specific particle diameter form the soil base has for one specified textile. One complete example is presented to demonstrate the simplicity of the method proposed and how the textile characteristics are obtained.