Obtenção de compósitos de borracha natural com resíduo industrial de couro reticulados com diferentes peróxidos

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Resíduo de abacaxi em programa de restrição alimentar qualitativa para suínos pesados

Pós-graduação em Ciência e Tecnologia Animal - FEIS

Beneficial effects of fermented vegetal beverages on human gastrointestinal microbial ecosystem in a simulator

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Componentes produtivos do trigo afetados pela densidade de semeadura e aplicação de regulador vegetal

Improvement on yield potential of plants by crop management is the main research challenge due to the growing of food demand worldwide. The objective of this work was to study physiological and morphological traits and its relationship with yield components and yield of wheat as affected by sowing densities and plant growth regulators. The experimental design was a split-plot design with four replications. The plots were consisted by four sowing densities ( 30, 50 70 and 90 plants m(-1)) and the subplots were consisted by plant growth regulators [control, (IBA+GA+KT), Trinexapac-Ethyl e (IBA+GA+KT) + Trinexapac-Ethyl]. Dry matter accumulation, plant height, source-sink distance, gas exchange and yield were determined. Trinexapac-Ethyl application resulted in decreasing of plant height, source-sink distance and flag leaf length; however, the grain yield was not affected. The number of plants per unit area affected dry matter accumulation. Higher dry matter accumulation showed direct relationship with yield and yield components in lower plant densities.

Biodegradação de óleos derivados do petróleo e de origem vegetal estimulada por biossurfactantes em meio aquoso e monitoramento de sua toxicidade

Não disponível

Biodegradação da vinhaça resíduo da produção de etanol

The State of São Paulo is responsible for the largest sugar cane production in Brazil, as well as the largest production of ethanol made of this raw material – which is widely used as fuel for automobiles. This utilization began in the 1970’s, with the institution by the Brazilian government of the National Alcohol Program (PRO-ÁLCOOL), as a consequence of the petroleum crisis, rising again five years ago, with the development of flex fuel cars. The obtaining process of ethanol originates residues; amongst them, vinasse is the one that’s generated in the largest amount (an average of 10 to 13 litres/litre of ethanol produced). The disposal of this residue in waters was only forbidden in 1978, but before that, researchers had already been investigating its utilization as raw material. This paper had the objective of accompany the biodegradation of vinasse by evaluating the oxygen comsumption during it until the ultimate Biochemical Oxygen Demand (uBOD), performed in twenty days; another objective was to analyse the biomass production of Saccharomyces cerevisae in this residue. Physical and chemical analyses of the residue were also performed, as well as acute toxicity essays using Daphnia similis and Dugesia tigrina, before and after its biodegradation. The physical and chemical analyses pointed elevated acidness (pH = 3,98), conductivity (8,30 mS/cm) and COD (25.693,43 mg O2/L) and mean quantity of suspended solids (5.246 mg/L). The toxicity essays indicated absence of toxic potential in vinasse after biodegradation for both species. The uBOD degradated until 88,22% of the COD, demonstrating the possibility of biodegradation of most of the residue’s organic load in a relatively short period of time. S. cerevisae caused a 37,03% COD diminution in vinasse, diminished its conductivity and promoted a slight elevation of the pH; it obtained low biomass...(Complete abstract click electronic access below)

Amostragem de poluentes gasosos e particulados emitidos pela queima de biomassa vegetal

The use of biomass as an energy source has been increasing in Brazil, with emphasis on the use of wood biomass, such as bark, wood chips and sawdust, that after receiving the appropriate treatment can be used in burners for power generation. However, from this burning are emitted fine particles known as particulate matter and a wide range of toxic organic and inorganic components in the form of gases that contribute greatly to air pollution and global warming, affecting human health, the environment and climate. The objective of this project was the quantification of gaseous and particulate, using and evaluating the equipment DR4000 ( Dataram 4 ) sampling of particulates smaller than 2.5μm and EUROTRON ( Ecoline 4000 ) when sampling gaseous pollutants, emitted from the burning of biomass in real time in the firing burner to a chimney attached biomass . We note that there are no specific rules that establish emission limits for particulate matter with diameter less than 2.5μm that are most harmful to human health and the highest concentrations reached about 800000μg/m3, for smaller diameters. It is noticeable the need for sampling of pollutants especially in industries that use biomass to fuel that could be implanted emission control equipment

Amostragem de poluentes particulados emitidos pela queima de biomassa em correntes confinadas

It is clear today the ever-accelerating search for new fuels that will eventually replace those that will survive in our society, which are fossil fuels. For this reason, a fuel used since the dawn of humanity and much studied since then, considered the generator of clean, renewable energy, can earn more and more space in the power generation sector, which is biomass. We performed two experiments with two different types of biomass, one from the Amazon rainforest and other pine and eucalyptus as waste from the sawmill UNESP Itapeva. In the first experiment, conducted at the Laboratory of Combustion and Propulsion INPE Cachoeira Paulista were conducted three tests in a chimney with a fan creating forced ventilation, where the biomass was burned and deposited on a support beneath the hood. In the second experiment was conducted to analyze the emission of particulate matter using biomass (waste) from the sawmill on the campus of UNESP experimental Itapeva the burning of it in a burner for heating water for a wood oven. In these experiments we used a particle called DATARAM4 sampler that is capable of sampling both outdoors and inside of pipelines, which is the focus of this work. With this equipment it was possible to measure the concentration of particulate matter in all the firings as above, and compare them to levels acceptable in the current law, always trying to analyze the so-called fine particles, which are those with diameters less than 2.5 μm. Using data obtained from the equipment was also possible to evaluate the diametral distribution of particulate matter in question, and verify which phases of the flares in the concentration and the diameters of the particles are the most critical. In this work we concluded that in all firings conducted concentrations of particulate matter were higher than that allowed by the law, and the diameters were found that are more harmful to human health

Dinâmica espacial e estrutura fitossociológica do estrato inferior de um trecho da comunidade vegetal às margens do Ribeirão Claro e de seu afluente Jardim Bandeirantes, Rio Claro/SP

O presente trabalho tem como objetivo descrever a estrutura fitossociológica do estrato herbáceo, de diferentes manchas que definem o mosaico da vegetação de um trecho do Ribeirão Claro e seu afluente Jardim Bandeirantes, analisando a diversidade das comunidades no tempo e no espaço, a dominância e a distribuição das espécies, estabelecendo relações com variáveis ambientais edáficas (umidade, pH e teor de matéria orgânica) e microclimáticas (luminosidade, cobertura de dossel e declividade), a fim de estudar a estrutura, composição e os processos sucessionais desta fitocenose. Foram definidas 13 manchas de vegetação como foco de estudo, em cada uma foram dispostas 6 parcelas de 5x5m perfazendo uma extensão de 30 m perpendicularmente ao rio. No interior das parcelas foram levantadas todas as formas de vida vegetais abaixo de 1,5m de altura, aplicando-se um método de avaliação de cobertura (método do toque), onde a amostragem foi realizada em intervalos de 0,5m. Os indivíduos foram amostrados com indicação do seu hábito e classificação taxonômica. As quantificações foram realizadas tanto no período chuvoso quanto no período seco, com a finalidade de entender a dinâmica sazonal dessa comunidade. A comunidade estudada apresentou variação em sua composição e estrutura no que se refere às estações seca e chuvosa. Os parâmetros ambientais analisados mostraram uma heterogeneidade física nas fisionomias descritas, o que pode estar contribuindo para a diferenciação na distribuição das espécies amostradas em cada fisionomia. Com base no inventário realizado, envolvendo a vegetação marginal do trecho estudado do Ribeirão Claro e seu tributário Jardim Bandeirantes, em duas estações distintas, os dados mostraram maiores variações da cobertura herbácea nas fitocenoses em estágios sucessionais mais avançados... (Resumo completo, clicar acesso eletrônico abaixo)

Produção de carvão vegetal a partir da madeira de Eucalyptus saligna clone SI70 com tres anos e meio de idade

Charcoal is obtained from carbonization, much used in the steel industry for ore reduction, using as raw material the Eucalyptus. The present study aims to verify whether the main Eucalyptus saligna genetically modified produce quality charcoal with only 3.5 years old. The study was done with material collected from three trees, divided into five discs removed at 0, 25 , 50 , 75 and 100 % of the commercial height of the tree. The procedures adopted were based on standards published by ABNT. The results were satisfactory for the parameters: basic wood density with an average of 0.39 ± 0.0082 g / cm ³; volatile materials from coal with an average of 19.35 ± 3.27 %, fixed carbon content of the coal with an average of 75.62 ± 3.40 % and gross calorific value of coal with an average of 4694.43 cal / g, and unsatisfactory results for ash content averaging 5.03 ± 0.23 when compared to the values found in the literature. It was concluded that the studied wood is able to produce charcoal, but the factors of production should be better observed, such as heating time which exerted direct influence on the determination of ash content

Schinus Terebinthifolius raddi: estudo farmacognóstico e investigação da atividade biológica de extratos e frações

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Comportamentos, térmico e mecânico, de compósitos de polipropileno e resíduo da hidrólise enzimática do bagaço de cana de açúcar

Pós-graduação em Engenharia Mecânica - FEG

Caracterização da cinza de bagaço de cana-de-açúcar e aplicação no solo

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Aplicação de cinza de bagaço de cana-de-açúcar nos atributos químicos e biológicos do solo

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Co-digestão dos dejetos de suínos e óleo vegetal de descarte: adição de microrganismos e lipases comercias

Pós-graduação em Zootecnia - FCAV