Fractografia quantitativa: correlação entre dimensão fractal e tenacidade à fratura em compósitos fibra de carbono/epóxi

The fracture surfaces express the sequence of events of energy release due to crack propagation by linking the relief of the fracture to the loading stresses. This study aims to evaluate the heterogeneity of the critical zone for the advancement of the crack along its entire length in a thermoset composite carbon fiber and epoxy matrix, fractured in DCB testing (Double Cantilever Beam) and ENF (End-Notched Flexure). Investigations were made from image stacks obtained by optical reflection of extended depth from focus reconstruction. The program NIH Image J was used to obtain elevation map and fully focused images of the fracture surface, whose topographies were quantitatively analyzed. The monofractal behavior for DCB samples was assessed as being heterogeneous along the crack front and along the crack for all the conditionings. For the samples fractured in ENF test, there was a strong positive correlation to the natural condition, considering the fibers at 0° for the monofractal dimension and structural dimension (Df and Ds). For fibers at 90° to crack propagation, there was a moderate positive correlation for the textural dimension of natural condition. However, for the samples under ultraviolet condition and those subjected to thermal cycles, there was no correlation between the fractal dimension and fracture toughness in mode II

Estudo do envelhecimento da liga AA 7075 encruada

Aluminum alloys are widely used in industry, because they combine different mechanical properties according to the alloying elements used in addition to thermal and mechanical treatments performed, resulting in materials with good weight/resistance relation. The 7XXX series alloys are worked heat treatable alloys commonly used in the aerospace industry, especially due to their high mechanical properties obtained after aging heat treatment, which increases the interest around 7075 alloy. Some studies with alloys which can be aged show that it is possible that cold word processes affect the results of aging. Thus, this study was intended to verify the influence of the aging process of AA 7075 alloy. There were three routes of aging with specimens previously treated thermally. In the first route T6 treatment was performed with a annealed specimen and other in solid solution. The second was the natural aging in a annealed specimen. In the last route was done aging by steps with a annealed specimen and other in solid solution with the intention to reduce the effects of natural aging. The results show that the routes 1 and 3 had similar hardness for all the samples, showing that the validity of Route 3 as an alternative and also the hardening did not affect the hardness at the end of the process, significantly reducing the time required for the highest hardness. Finally, natural aging was less effective in increasing hardness

Preparação e caracterização de vidros contendo nanopartículas de Ag

This work consists of preparation and characterization of glasses containing transition noble metals and the study of optical properties of such materials. The glasses were prepared by quenching of the glass melt followed by heat treatment and polishing of the monoliths. The structural characterization of glasses was made using differential thermal analysis, X-ray, Raman and infrared spectroscopies, while the optical properties were studied by UV-Vis and M-Lines spectroscopies. Preliminary results have shown that the color of the glasses is dependent on both concentration of silver and the melting temperature of the melt. Controlled heat treatments have been used to induce the crystallization of Ag nanoparticles within the glass. The study of crystallization was accompanied by electron microscopy and UV-Vis spectroscopy. Data from electron diffraction, as well as chemical analysis, EDX, were obtained using a transmission electron microscope. EDX data have shown that the atomic percentage of Ag is higher on the nanoparticle. X-ray diffraction was used in order to characterize the composition of the crystals and cubic AgCl was identified as the main crystallized nanophase obtained after annealing

Ativos alisantes em cosméticos

A utilização de produtos cosméticos que resultem em alisamento ou relaxamento dos cabelos tem-se tornado cada vez mais comum. O desejo das mulheres em possuir um cabelo liso é registrado desde a época de escravidão e, em 1940, foram lançadas formulações contendo hidróxido de sódio para essa finalidade. O alisamento dos cabelos pode ser obtido por processos térmicos ou químicos, onde o primeiro apresenta efeito temporário (até o contato com umidade) e o segundo apresenta efeito definitivo. Por esse motivo, os alisamentos a base de substâncias químicas é chamado de alisamento definitivo. Diversas substâncias foram historicamente utilizadas a fim de obter o efeito alisante, tais como hidróxido de sódio, hidróxido de lítio, hidróxido de guanidina e tioglicolato de amônia. Em comum, estas substâncias agem profundamente na fibra capilar, alterando as ligações químicas da queratina, resultando em uma reestruturação destas ligações. Entretanto, essas substâncias também causam diversos danos a fibra capilar devido ao mecanismo de ação destes produtos. A supervalorização da imagem feminina e a busca incansável pela beleza fizeram com que, cada vez mais, estas substâncias químicas sejam utilizadas de modo indiscriminado e ilegal. O uso irracional dessas substâncias traz conseqüências graves à saúde dos consumidores e profissionais cabeleleiros, tais como dermatites, intoxicações e riscos de carcinogênese. Como exemplo, o uso de formaldeído como agente alisante foi proibido pela Agência Nacional de Vigilância Sanitária Brasileira (ANVISA) desde 2009, assim como sua venda e exposição em estabelecimentos públicos de todo o país, devido ao alto risco apresentado aos consumidores e profissionais. Dessa forma, a pesquisa e o desenvolvimento de produtos alisantes devem ser feita de modo responsável ...(Resumo completo, clicar acesso eletrônico abaixo)

Análise preliminar para a estimativa da perda de calor sensível de um fluido homogêneo térmico em um reservatório de geometria cilindrica

This work analyzed the loss of sensible heat from one fluid to be considered homogeneous heat distribution on a thermal reservoir with cylindrical geometries composite insulating layers. We studied two thermal reservoirs with a volume of 20 liters, and the first has a layer thickness of 75 mm of expanding polyurethane foam wrapped in the polycarbonate container and the second container has only layer thickness of 5 mm of polycarbonate, as insulation of fluid of the external environment. The experimental results are compared with theoretical results obtained through a calculation script, displayed and detailed during the work development, from the theory of energy balance. The maximum error introduced between the theoretical and experimental results were 3.5% and 1.4% respectively for the Boilers with or without a polyurethane coating

Auditoria energética em caldeira de monóxido de carbono

Within the concepts of sustainability, energy audit magnified its importance in managing systems in industrial plants. Can reduce waste and save energy representative, the improvement and development of thermal and electrical systems can be very attractive to business. With the focus on a boiler generating steam, the energy audit aimed to increase efficiency and eliminate energy losses of the heat engine. The boiler in question is commonly called CO boiler because most of the calorific power provided comes from this. Using a fuel gas from the catalyst regeneration process, it has featured in the boiler power generation system of the refinery. Burning a mixture of gaseous components from discarded into the atmosphere, the heat engine can generate tons of steam just as the other boilers installed. The challenge was to work with this gas mixture and obtain maximum efficiency, reduce moisture and enjoy the warmth of the heat exchange have been studied and recommended. Every project, from evaluation of the variables in the composition of fuel gas, to the using of heat exchangers and refrigeration system are suitable for evaluation and improvements

Análise da curva de resfriamento e refino de grão da liga de alumínio AA 356

The macrostructure of an alloy solidification in the raw state is of utmost importance due to its influence on mechanical properties. A structure showing columnar grains is generally undesirable in most applications of cast products and grain refining aims to suppress the formation of these grains and get a fine-grained equiaxed structure that improves the supply of liquid metal and the mechanical properties, as yield strength and tensile strength limit, as well as the tendency of formation of hot cracks. The type and size of grains formed are determined by chemical composition, cooling rate and the use of inoculum for grain refining. Titanium and boron are the major refiners in the aluminum industry and can be added to the molten metal in the form of alloys such as Al-Ti, Al-Ti-B or Al-B. In this paper we will discuss the information obtained from cooling curves and first derivative of the cooling curve to obtain the thermal parameters that influence the process of grain refining alloy AA 356.0

Vitrocerâmicas para blindagens balísticas

The use of ceramic materials in ballistic armor is considerable. Such materials can be very harder and lighter than metallic materials commonly used and it presents advantages to replace metallic materials when necessary toughness can be achieved. However, as SiC and Al2O3 ceramic, traditionally used for shielding, still have high manufacturing cost or low density do not have enough to shield applications such as aircraft. An alternative is the glass-ceramics, ceramics obtained by controlled crystallization of glasses, whose properties can be adjusted by choosing the chemical composition of glass, heat treatment of crystallization and special treatments such as ion exchange on the surface, resulting in increased mechanical strength . The objective of this project is to study the kinetics of crystallization of a glass composition based on cordierite (2MgO.2Al2O3.5SiO2), low density and high hardness, for the manufacture of glass-ceramics for ballistic tests. Shown in this report are results of heat treatment of crystallization and characterization by thermal analysis (DSC) glass obtained previously, indicating uneven distribution of crystals, and drying, weighing, mixing of raw materials and a new fusion of glass, the same composition

Perfil epidemiológico dos pacientes internados na unidade de tratamento de queimaduras do Hospital Estadual de Bauru

Burns are frequent accidents, and they are among the major causes of morbidity and mortality in our society. In Brazil, statistical data on such lesions are relatively scarce, and they are concentrated in a few treatment centers. Data on such accidents allow for specific care to be timely and properly taken in order to provide patients with a better prognosis, in addition to enabling the development of prevention programs as well as fire-prevention safety laws. To characterize the epidemiological profile of users at the Burn Treatment Unit of Bauru State Hospital. Collection of epidemiological data through the e-pront system and from charts of burned inpatients from April 2005 to April 2010. During the studied period, 906 hospitalizations of burned patients occurred, with an annual average of 181.2 individuals. Their mean age was 28.4 years, with a predominance of males. The mean hospitalization period was of 27.6 days, with a median of 16 days and a maximum of 216 days; 14.7% developed to death, with the highest mortality rate in the first two weeks of hospitalization. Second-degree burns were the most frequent; 36.8% of the patients burned less than 10% of their body surface, and there was a gradual frequency reduction when a larger burned surface was taken into account; the greater the affected areas, the higher the number of deaths; 91% resulted from thermal agents, 6% from electric and 2% from chemical agents; scalding was the major cause among all agents, followed by alcohol associated with fire and direct flame. The major area affected areas were the upper limbs. The study shows the need for educational and preventive measures, particularly for the young adult population, by means of educational programs and prevention campaigns

Análise da estabilidade dimensional e resistência mecânica em bambu Guadua angustifolia pós-processos de tratamentos químicos e térmico

Nowadays, bamboo is being studied because of their strength properties according with their specific mass and speed of growth, which makes it an important alternative as a new resource that will help reduce pressure on forests and helpping them favoring the minimization of uncontrolled deforestation in many regions of Brazil. This study aimed, in general, to analyze physical and mechanical properties of the material with the divulgation of its potential for industrial application. To do so, in this research were determined in relation to the physical properties, moisture content, dimensional stability and the apparent densities and the mechanics and basic, just a tension parallel to grain, in order to observe the interference of various kinds of treatments (chemical, thermal and natural) on the strength and modulus of elasticity in this request. The species used was the Guadua angustifolia, a species native of Brazil. All tests were performed at Universidade Estadual Paulista - Campus Experimental Itapeva in the laboratory of Materials Properties. The methodology used for testing of moisture, density and tension parallel to grain were based on NBR 7190/1997 for the wood, and dimensional stability tests were based on much the same as in COPANT 462/1972 (South American) . The preservative treatments conducted followed the recommendation of each manufacturer. The values obtained in tests of physical properties were satisfactory especially with respect to density and dimensional stability analyzed by the coefficient of anisotropy, showed that, compared to wood, excellent quality for the shrinkage test, obtaining a coefficient of 1.2. With respect to parallel tensile tests to fibre results showed, in most cases, that test specimens with the presence of us have lower values of resistance and modulus of elasticity when compared with those without us. In the treatment of thermal-treatment there was an apparent treatment there was an apparent increase in...

Análise teórica e simulação computacional de um sistema de resfriamento líquido de processadores de computadores pessoais

This paper aims to study the thermal aspects involved in a liquid cooling system for processors, analyzing their competitiveness and efficiency across the fins and fan system usually used by personal computers, because electronic components become more potent and consequently current methods of cooling are becoming ineffective. The liquid cooling system and air cooling system have different heat transfer mechanisms that involve mainly convection and conduction heat transfer modes, and, furthermore, requires an analysis of fluid dynamics, which can evaluate the losses involved in the closed system, consisting in an exchanger heat pipe and water blocks in liquid cooling system or heat sink and turbo-axial fan in the air cooling system

Confecção e caracterização de filmes finos de boro para a medida da taxa de reação 10B(N, a)7LI na terapia por captura de nêutrons pelo boro

The Boron Neutron Capture Therapy (BNCT), based on the 10B(n,α)7Li reaction, represents a promising modality for the treatment of cancers that are resistents to conventional treatments. So, it is necessary to find drugs (boron compounds) with high selectivity for each type of cancer, the neutrons source should be well characterized and the rate of 10B(n,α)7Li reaction should be measured with great accuracy as possible. This study aimed to develop a method for manufacturing thin films of boron, for measure the 10B(n,α)7Li reaction, and analyze the uniformity of the films. Five thin films of boron were manufactured with three different concentrations of boric acid, heated to transform the acid in boron, irradiated with thermic neutrons coupled to CR-39 detectors, in BNCT line at the reactor IEA-R1 IPEN/CNEN, São Paulo. After the irradiation, the detectors were chemically attacked with NaOH to reveal the tracks. The methodology presented is effective because it resulted in deposition of boron as thin film enabling the quantitative analysis of 10B(n,α)7Li reaction. The analysis of the uniformity of density of the induced tracks in CR-39 shows that, in most of the films, there is no uniformity in surface distribution of boron, but when the film is divided, we obtain some uniform sectors

Avaliação da influência da taxa de resfriamento posterior ao tratamento térmico nas propriedades mecânicas do aço API 5L X70

In this work a study about the mechanical properties of the API 5L X70 steel, with or without heat treating, has been made, with the intetion of assess the influence of cooling after the austenitization heat treating by air cooling (normalizing) and a rapid cooling with oil (tempering). This steel is known by high strength and ductility values and it is commonly used in the manufacture of oil pipes. The growing energy demand encouraged the study and manufacture of this material. Although this microalloyed dispense subsequent heat treatings, it was proven that its implementation is very advantageous for this type of application, improving hardness and plastic stability. It was also assessed that the faster the cooling rate is, the better will be these properties

Staphylococcus sp na produção primária de leite: aspectos de saúde pública

Staphylococcus is one of the more important causes of the called Foodborne Disease(FD), being that from the 40 species described from genus, the more important is Staphylococcus aureus. During years believed that the S. aureus was the only specie from genus able to produce enterotoxins, responsable for the clinical frame in humans, but latest studies report the isolation of other species both positive coagulase (PC) as negative with enterotoxigenic potential. The symptoms of this intoxication appear after a short period of incubation (2-6 hours) and usually characterized by nausea, vomits, abdominal ache, diarrhea, and rarely is fatal. For the toxin to be formed in food is necessary that bacteria population to be at least 105 UFC/g, being that such toxins characterized by presenting great resistance front of gastrointestinal proteases and of homemade termical treatment. Among the main foods that might carry the microorganism, the milk and its derivatives have highlights. The contamination of the product might happen as from the milk from cows with clinical and/or subclinical mastitis, as the Staphylococcus genus is one of the main agents etiologic from this disease, equipments utensils badly sanitized equipments and utensils and from the manipulators. The control of these factors configures as fundamental condition for the achievement of a safe, quality product, which doesn’t offer risk to the consumers

Evolução da tecnologia móvel até 2013

In this paper expounds on the major phases or generations of the evolutionary process of wireless mobile communication, emphasizing their characteristics and changes over time. The main benefit of this process is the rate of data transfer remembering capacity spectral and methods of harnessing and improving its efficiency. The current network today is 4G and the technologies developed over the following requirements of the ITU are: Long Term Evolution Advanced (LTE-Advanced) and WirelessMAN-Advanced as part of the WiMAX IEEE 802.16m also described in this graduate work