Modelagem da variação horária da temperatura do ar em Petrolina, PE, e Botucatu, SP

The air temperature is a climatic element of interest for several agricultural related studies. Hence, daily air temperature from two locations in Brazil (Botucatu and Petrolina, with different climate classification), hourly recorded from January 2004 to December 2005, were analysed to verify if 24 h long air temperature variation can be predicted with 6 h interval records. Three data set were selected, with different first time record of air temperature, and analyses performed using geoestatistics to confirm the temporal dependency of records. Then, ordinary krigging was used to model air temperature variation within 1 h interval, and spherical model presented the best approach, with range of 11.6 h for Botucatu and 12.7 for Petrolina. For both locations, the time of air temperature recording was the most importnat factor on accuracy of estimation of air temperature variation. Records at 2, 8, 14 and 20 h and at 4, 10, 16 and 22 h presented the best approaches, but for records at 9, 15 and 21 h, the approach was worst.

A metodologia de superfície de resposta como ferramenta para a avaliação da produção de alginato e poli-hidroxibutirato pela Azotobacter vinelandii

The response surface methodology as a tool for assessing the production of alginate and polyhydroxybutirate by Azotobacter vinelandii. Alginate is a polysaccharide extracted from cell walls of brown algae and used in the food, pharmaceuticals and biotech industries. Production is concentrated on the cultivation of brown seaweed, but several bacteria of the genus Pseudomonas and Azotobacter produce alginate. The chemical structure of alginates produced by algae is similar to those synthesized by A. vinelandii. The bacteria also produce intracellular polymers such as polyhydroxybutyrate (PHB), known as bioplastic. This work studied the simultaneous alginate and PHB production by A. vinelandii using sucrose and different parameters of fermentation in an orbital shaker. The optimal values for the production of these compounds were determined by the MSR. The first experiment was a 2(6-2) factorial design. The second was based on significant variables of the first, resulting in a full 3(3-0) factorial design. From the first to the second, an increase was observed in the PHB productivity from 12 to 45 mg g(-1) cell h(-1) and alginate from 100 to 1,600 mg g(-1) of cell h(-1). The productivity of both compounds was in the maximum incubation temperature of 62 degrees C, in the shortest time of incubation (18h) and the sucrose concentration, 11 g L(-1). In both experiments the PHB extracted presented purity of 94%.

Rugosidade superficial de ligas com alto conteúdo de cobre, em função do aquecimento acima da temperatura de fusão.

Being the surface roughness a fundamental property in the fit of the castings, it was determined the roughness of 5 high-copper casting alloys, according to the heating over their melting temperature. That way, the specimens made with smooth plastic in the shape of a rectangular plate, 2 mm x 7 mm x 11 mm were invested into a cristobalite investment. After heating and elimination on the plastic, the molds were filled by 3 g of molten alloy, casted in a electrical casting machine at the casting temperature at 25 degrees C and 50 degrees C overheating. The surface roughness was measured in a roughness analyser, Talysurf. As a result, it was verified that there is a variation of surface roughness among the alloys tested, and the heating of the alloys until 50 degrees C over the melting temperature does not interfere in the roughness.

Efeito da temperatura sobre o desenvolvimento de Scymnus (Pullus) argentinicus (Coleoptera: Coccinellidae)

The biology of Scymnus (Pullus) argentinicus Weise on Schizaphis graminum at the temperatures 20, 25 and 30°C was studied. The temperatures of 25 and 30°C were favorable to S. (Pullus) argentinicus development. The average of the incubation period was 3.24 days and the larval development was 8.43 days at 25°C. The duration of the instars and pre-pupal and pupal periods was significantly shorter at 25 and 30°C. The percentage of emerging adults was higher at 30°C (98%) while at 20°C this percentual was 82%.

Efeito da restrição alimentar inicial e da temperatura ambiente sobre o desenvolvimento de vísceras e ganho compensatório em frangos de corte

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação da relação entre a temperatura da superficie corporal e produção de vacas jersey submetidas à climatização na pré-ordenha

Jersey cows has been used in warm climates because they have better performance in dairy production. Generally milk production is reduced in warm climates due to the consequent reduction in feed intake because of the heat stress. When the heat stress occurs there is an increase in the body temperature, however it is not known if the skin temperature indicates a thermal discomfort or if it influences milk yield. The objective of this research was to verify if there was a correlation between skin temperature and milk yield using two treatments. Treatment (A) where the cows stayed for 30 minutes before the milking period, in a room with a shower and a fan; and treatment (B) where the cows did not had access to any cooling device (control). After milking the skin temperature were recorded in the places: forehead, back, leg and teats. Data were statistically analyzed and, even though in treatment (A) the skin temperature were reduced it was not found correlation between skin temperature and milk yield.

Adesão de protozoários ̀a superfície de dispositivos intra-uterinos

Intrauterine devices (IUD) have been used by approximately hundred million of women in the world. IUD are unprescribed to women who have pelvic inflammation disease predisposition which is caused in general by non-treated sexually transmitted diseases (STD). Trichomoniasis, one of the most important vaginal infections, is caused by a flagellated protozoan, Trichomonas vaginalis, transmitted by sexual contact and also asyntomatic women are able to transmit it. The objective of this work was verify by scanning microscopy the adhesion of this protozoan on plastic and metalic IUD surfaces. IUD fragments were added in Diamond medium containing T. vaginalis and after 3 days at 37°C incubation, they were taken out and treated as necessary for scanning microscopy. The analysis showed showed the adhesion of the protozoans on plastic and metalic IUD surfaces. Even though the IUD were not yet directly associated with high incidence of the inflammation pelvic disease, it would become an infection reservoir of potencial pathogenic organisms.

Morfologia da micrópila e da superfície dos ovócitos de piracanjuba, Brycon orbignyanus (Osteichthyes, Characidae), sob microscopia eletrônica de varredura

This paper studied the morphology of oocytes of Brycon orbignyanus, (Osteichthyes, Characidae), through observation in Scanning Electron Microscopy (SEM). Fragments of the ovaries from adult females were collected. During the reproductive period, a hormonal induction in females was carried out to collect the oocytes after extrusion. The samples were fixed and processed for observation in SEM. Results showed that the oocytes of B. orbignyanus had a follicular epithelium formed by a single layer of cells with compressed shape, covering the whole radiatta zone that showed a smooth and regular surface with innumerable pores. The micropyle had a funnel-shaped, containing several furrows. The oocyte surface around the micropyle presented pores closer of each other than the other surface areas of radiatta zone.

Extração de matéria orgânica aquática por abaixamento de temperatura: Uma metodologia alternativa para manter a identidade da amostra

In this work was developed an alternative methodology to separation of aquatic organic matter (AOM) present in natural river waters. The process is based in temperature decreasing of the aqueous sample under controlled conditions that provoke the freezing of the sample and separation of the dark extract, not frozen and rich in organic matter. The results showed that speed of temperature decreasing exerts strongly influence in relative recovery of organic carbon, enrichment and time separation of the organic matter present in water samples. Elemental composition, infrared spectra and thermal analysis results showed that the alternative methodology is less aggressive possible in the attempt of maintaining the integrity of the sample.

Avaliação da formação do biofilme de Candida albicans sobre superfície de titânio revestida com hidroxiapatita por meio de microscopia eletrônica de varredura

In this study Candida albicans biofilm formation on the surface of commercially pure titanium (cp-Ti) coated with hydroxyapatite was observed by means of scanning electron microscope. The biofilm was formed after 45 days of incubation of the samples in liquid culture medium inoculated with fungus cells in a tube of polystyrene with screw cap and sterilized. After the biofilm removal with 10% EDTA solution was observed pitting on the surface of cp-Ti coated.

Efeito da temperatura ambiente e da restrição alimentar protéica ou energética sobre o ganho de peso e crescimento ósseo de frangos de corte

The effect of protein or energy restriction during the second week post-hatching on body weight gain and femur development of broiler chickens reared at different environmental temperatures (18°C, 25°C and 33°C) was studied. From 1 to 7 days of age and after a restriction period broilers were fed on a control diet with 2850 kcal ME/kg and 20% crude protein. From 8 to 14 days of age, two groups of broilers were fed on restricted energy and protein diets with 2565kcal ME/kg and 20% of crude protein or 2850kcal ME/kg and 15% of crude protein, respectively. At 14, 21, 28, 35 and 42 days, the bones were weighed and the length and width of bones measured. The protein restriction reduced the body weight gain and the diameter of bone at second week of life. After 21 days of age no differences between treatments for these traits were observed. The body weight gain and femur growth were not affected by energy restriction. The high temperature (33°C) reduced weight gain and femur diameter from 21 to 42 days of age, and femur length at 42 days of age. The protein restriction at second week or the high environmental temperature after 21 st day of life decreased body weight gain and femur growth of broiler chickens.

Geração de modelos digitais de superfície por meio de plataformas computacionais com estrutura vetorial e raster

Geographic Information Systems (GIS) integrate the technologies related to Geoprocessing, with the ability to manipulate georeferenced information through data storage, management and analysis. One of the GIS applications is the generation of Digital Elevation Models (DEM) as a result of rebuilding the elevation of a region using computation tools and artificial representation. This paper presents the DEM created from a point base in two computational frameworks with different structures (vector and raster), comparing the contour lines generated from these models with the original contour lines from analog cartographic base. It was observed that one of the generated models presented some discrepancies related to real space for both GIS structures. However, using constrained Delaunay's triangulation in raster GIS a digital elevation model was generated with contour lines quite close to the original ones, with satisfactory results. A 3-D terrain representation was also created offering a very useful tool for analysis.

Efeito da temperatura na germina̧ão de sementes de Sebastiania commersoniana (Baillon) Smith & Downs separadas pela colora̧ão do tegumento

Sebastiania commersoniana (Euphorbiaceae) is a tree species of riparian forests in Brazil. Seeds of this species released from mature fruits have heteromorphy in coat colour: dark (dark-brown to black), striated (dark with light-grey stria) and clear (light-grey to whitish). In this work two experiments were carried out in order to study the effect of temperature on seed germination in interaction with coat colour. Germination final percentage and speed index were evaluated. In the first experiment seeds of the three colours were submitted to constant (30°C) and alternating (20-35°C) temperatures. For all the seed colours, best results were obtained at alternating temperature. Physiological quality of striated seeds was greater than those clear seeds and dark seeds were intermediate. In the second experiment striated and clear seeds were submitted to three amplitudes of alternating temperature: 5°C (20-25°C and 25-30°C), 10°C (20-30°C and 25-35°C) and 15°C (20-35°C). Both germination percentage and speed were higher in striated seeds and for the two seed colours, best results were obtained at 20-30°C and 20-35°C. These temperatures are recommended for the germination test.

Modelagem numérica da superfície na geração da planialtimetra segundo dados de quatro equipamentos topogríficos

The aim of this present work was to compare planialtimetric charts obtained from different risings using two different theodolite types, a total station, and a precision level, used as control. Using a total station, an area was marked with clear variations of relief, following a grid, with a distance of 20 meters among stakes. After that, the stakes were read by the total station and two theodolites of different precisions. The geometric leveling was done by a precision level. The data were input in the DataGeosis software and the numerical modelling of the land was made with mesh of maximum rigidity, generating planialtimetric representation for each rising. It was verified, through comparison of the four representations that little variations occur in relation to the control. The closest representation of the control was the planialtimetry based on the data from the total station, in which the representations obtained from the theodolites were identical among themselves. It was concluded that in the process of obtaining detailed planialtimetry of small areas, submitted to the grid, it was not necessary to use composed geometric leveling, reducing work to the exclusive use of a total station or conventional theodolite.

Análise de superfície de tendência aplicada à chuva, medida por radar meteorológico, nas regiões de Assis e Piracicaba, SP

This paper presents the results from lineal trend surface analysis technique application. The purpose was to detect positive and negative anomalies in the rain measure distribution obtained by the meteorological radar Doppler, band S, located in Bauru, during the period of 21 of October/2004 to 29 of April/2005 in the areas of Assis and Piracicaba. Using three Z-R radar relations for rain quantification was chosen the specific equation Z = 32R1,65, as the best one. The results showed that the applied methodology was able to indicate the space distribution of the rain accumulated, identifying and locating the regions where there was rainy excess and rainy lack during each analyzed period. Such results indicate areas with larger pluvial impact and consequently more favorable for environmental damages.