234 resultados para Synthetic Control Method


Relevância:

30.00% 30.00%

Publicador:

Resumo:

Actually, the most used method to control ticks is synthetic acaricides with neurotoxic action. However, the use of these methods presents inconveniences, such as the contamination of the environment and risks to the host's health due to the residual effects. Thus, several studies have been developed aiming to find alternative ways to control these ectoparasites, such as the use of natural compounds with active ingredients, which act controlling some species of plagues in addition to presenting medicinal properties that are beneficial to humans. The present study aimed to analyze the action of andiroba oil (Carapa guianensis) on the synganglion of Rhipicephalus sanguineus semiengorged females through morphological and cytochemical techniques aiming to verify if this natural product have neurotoxic action as the numerous synthetic acaricides. The results showed that andiroba oil interferes in the synganglion through structural and enzymatic changes, which lead the nervous tissue to apoptotic death involving autophagy. Among these changes was observed the emergence of large empty spaces between the perineurium and the cortical region, vacuolated cortex cells and with cell swelling, neural cells with picnotic nuclei or in initial stage of chromatin margination and neuropile with high structural disorganization. Considering these data, it can be concluded that andiroba seed oil can be used as an alternative method in the control of R. sanguineus ticks due to its neurotoxic action. © 2013 Wiley Periodicals, Inc.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This work presents an alternative approach based on neural network method in order to estimate speed of induction motors, using the measurement of primary variables such as voltage and current. Induction motors are very common in many sectors of the industry and assume an important role in the national energy policy. The nowadays methodologies, which are used in diagnosis, condition monitoring and dimensioning of these motors, are based on measure of the speed variable. However, the direct measure of this variable compromises the system control and starting circuit of an electric machinery, reducing its robustness and increasing the implementation costs. Simulation results and experimental data are presented to validate the proposed approach. © 2003-2012 IEEE.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The açai palm is a Brazilian native species and economically important, grown for the hearts of palm and fruit extraction, as well as the seedling production for ornamental purposes. The weed control is one of the concerns observed in seedling production, which has the artillery plant (Pilea microphylla) with the major and widespread occurrence. Thus, the aim of this trial was to evaluate the selectivity and efficacy of oxyfluorfen in artillery plant control in açai (Euterpe oleracea) seedlings. The experimental design was completely randomized. The treatments were arranged in a 2 x 3 factorial scheme, using 2 types of herbicide application: broadcast spraying (sprayed over total area) and spot spraying (directed to the target) and 3 oxyfluorfen dosages (0, 72 and 144 g of active ingredient ha-1) with four replications. Each experimental unit consisted by one açai palm pot infested by artillery plant. They ere visually evaluated for seedling toxicity and the weed control percentage, at 7, 15, 30, 45 and 60 days after application (DAA). There was 100% control of artillery plant from 15 to 60 DAA for the two tested dosages, regardless of application type. However, 100% control was observed at 7 days, using 1.5 L ha-1 in the spot type. The effects of phytotoxicity from 30 to 60 days was moderate, regardless the application method or dosage.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This paper deals with the problem of establishing a state estimator for switched affine systems. For that matter, a modification on the Luenberger observer is proposed, the switched Luenberger observer, whose idea is to design one output gain matrix for each mode of the original system. The efficiency of the proposed method relies on a simplification on estimation error which is proved always valid, guaranteeing the estimation error to asymptotically converge to zero, for any initial state and switching law. Next, a dynamic output-dependent switching law is formulated. Then, design methodologies using linear matrix inequalities are proposed, which, to the authors's knowledge, have not yet been applied to this problem. Finally, observers for DC-DC converters are designed and simulated as application examples. © 2013 Brazilian Society for Automatics - SBA.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This paper proposes a straightforward compromising method to determine the output power of all committed units during the scheduling time horizon. Unlike the conventional methods that work based on a constant pollution control cost (CPCC), this method works based on the system topology such as demand, minimum cost and minimum output emission of the system. In order to have a meaningful compromise between costs and emission in economic and emission dispatch (EED) problem, a flexible pollution control cost (FPCC) is proposed. Also a dynamic economic emission dispatch (DEED) approach is considered where the ramping constraints couple the scheduling hours; the inclusion of valve-point effect makes the DEED modeling more practical. The validity and effectiveness of the unproblematic FPCC approach is verified through an IEEE 30-bus test system with 6 unit for the 6-hour scheduling horizon. © 2013 IEEE.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

An indirect method for the georeferencing of 3D point clouds obtained with terrestrial laser scanning (TLS) data using control lines is presented. This technique could be used for rapid data acquisition where resources do not permit the use of expensive navigation sensors or the placement of pre-signalised targets. The most important characteristic is the development of a mathematical model based on the principle that the direction vector of the TLS straight line is coplanar with the plane defined by the origin of the TLS system, one endpoint of a control line and the direction vector of the control line in the ground reference coordinate system. The transformation parameters are estimated by minimising the distance between the control lines and their corresponding TLS straight lines. The proposed method was tested using both simulated and real data, and the advantages of this new approach are compared with conventional surveying methods. © 2013 This article is a U.S. Government work and is in the public domain in the USA.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Pós-graduação em Ciências Biológicas (Microbiologia Aplicada) - IBRC

Relevância:

30.00% 30.00%

Publicador:

Resumo:

OBJECTIVE: The aim of this study was to identify the procedures adopted by Brazilian orthodontists in the following situations: extraction space closure, anchorage control in case of necessary anchorage for group A and frequency of skeletal anchorage use, especially in the upper jaw. METHOD: A questionnaire was sent to the e-mail address of all dentists registered in the Brazilian Federal Council of Dentistry. RESULTS: The results showed that most Brazilian orthodontists usually perform extraction space closure by means of sliding mechanics. The use of palatal bar, inclusion of second molars in the archwire and space closure performed in two phases are the most used techniques for anchorage control in the upper jaw. The skeletal anchorage is referenced by 36.5% of specialists as a routine practice for the upper jaw anchorage. CONCLUSIONS: There is a wide variety of procedures adopted by Brazilian orthodontists for orthodontic space closure and anchorage control.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Improved methods for the detection of Histoplasma capsulatum are needed in regions with limited resources in which the organism is endemic, where delayed diagnosis of progressive disseminated histoplasmosis (PDH) results in high mortality rates. We have investigated the use of a loop-mediated isothermal amplification (LAMP) assay to facilitate rapid inexpensive molecular diagnosis of this disease. Primers for LAMP were designed to amplify the Hcp100 locus of H. capsulatum. The sensitivity and limit of detection were evaluated using DNA extracted from 91 clinical isolates of known geographic subspecies, while the assay specificity was determined using DNA extracted from 50 other fungi and Mycobacterium tuberculosis. Urine specimens (n = 6) collected from HIV-positive individuals with culture- and antigen-proven histoplasmosis were evaluated using the LAMP assay. Specimens from healthy persons (n = 10) without evidence of histoplasmosis were used as assay controls. The Hcp100 LAMP assay was 100% sensitive and specific when tested with DNA extracted from culture isolates. The median limit of detection was <= 6 genomes (range, 1 to 300 genomes) for all except one geographic subspecies. The LAMP assay detected Hcp100 in 67% of antigen-positive urine specimens (4/6 specimens), and results were negative for Hcp100 in all healthy control urine specimens. We have shown that the Hcp100 LAMP assay is a rapid affordable assay that can be used to expedite culture confirmation of H. capsulatum in regions in which PDH is endemic. Further, our results indicate proof of the concept that the assay can be used to detect Histoplasma DNA in urine. Further evaluation of this assay using body fluid samples from a larger patient population is warranted.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Objectives: To evaluate the antimicrobial activity of Arctium lappa L. extract on Staphylococcus aureus, S. epidermidis, Streptococcus mutans, Candida albicans, C. tropicalis and C. glabrata. In addition, the cytotoxicity of this extract was analyzed on macrophages (RAW 264.7).Design: By broth microdilution method, different concentrations of the extract (250-0.4 mg/mL) were used in order to determine the minimum microbicidal concentration (MMC) in planktonic cultures and the most effective concentration was used on biofilms on discs made of acrylic resin. The cytotoxicity A. lappa L. extract MMC was evaluated on RAW 264.7 by MTT assay and the quantification of IL-1 beta and TNF-alpha by ELISA.Results: The most effective concentration was 250 mg/mL and also promoted significant reduction (log(10)) in the biofilms of S. aureus (0.438 +/- 0.269), S. epiderrnidis (0.377 +/- 0.298), S. mutans (0.244 +/- 0.161) and C. albicans (0.746 +/- 0.209). Cell viability was similar to 100%. The production of IL-beta was similar to the control group (p > 0.05) and there was inhibition of TNF-alpha (p < 0.01).Conclusions: A. lappa L. extract was microbicidal for all the evaluated strains in planktonic cultures, microbiostatic for biofilms and not cytotoxic to the macrophages. (C) 2014 Elsevier Ltd. All rights reserved.