Modelagem matemática e simulação computacional de derrames de óleo em corpos d'água: um estudo de caso na região do Porto de Santos

The objective of this work is to accomplish studies of mathematical modeling and computational simulation of oil spills in water bodies. For this reason, a case study in the region of the Port of Santos was developed using the softwares SisBAHIA and ADIOS2 for the simulation of different hypothetical scenarios of oil spilling on the surface of water, aiming to obtain information that contribute to the reduction of the possible environmental impacts that can be caused by such accidents. The results generated in the different simulations had shown that the obtained data can be extremely useful to subsidize the elaboration of mitigation plans, the mapping of risk areas or even the proposal of emergencial strategies in cases of real accidents, configuring the modeling and the simulation as important and modern tools for the environmental planning and management.

Jogo baseado em simulação de vida artificial

The market of digital games have grown in the last years, becoming popular between many ages, the number of smartphones and tablets users have also showed a recent increase, including the ones using Android as operational system. The main objective of a digital game is the ludic activity but also it can be used as a tool to education, learning and even simulation. This work proposes the development of a game for smartphones or tablet running on Android operational system, this game will simulate living beings in an environment, each one with different behaviors, based in the concepts of artificial live, cellular automata and emergence. This way simulating the behavior of a living being community with a computational base in artificial live and following concepts of game design. The game can represent visually some characteristics of living beings, as well behaviors and interactions between them, in a very simple way. The game can be upgraded in the future to represent better living beings using more details to the simulation of these

Desenvolvimento de um código computacional para simulação e análise de espectros atômicos

The aim of this work was the development a computer code for simulation and analysis of atomic spectra from databases constructed from the literature. There were created four routines that can be useful for spectroscopic studies in the atomic processes of laser isotope separation. In the first routine, Possible Transitions, the program checks the possible electron transitions from an energy level of the atom present in the database considering the selection rules for an electric dipole transition. The second routine, Locator Transitions, checks the possible electronic transitions within a user-specified spectral region. The routine Spectra Simulator creates simulated spectra using the graphical application gnuplot through lorentzian curve and finally, the routine Electronic Temperature determines the temperature of electronic excitation of the atom, thought the Boltzmann Plot Method. To test the reliability of the program there were obtained experimental emission spectra of a hollow cathode discharge of dysprosium and argon as a buffer gas. The hollow cathode discharge has been subjected to different values of operating currents and pressure of inert gas. The spectra obtained were treated with the assistance of program routines developed (Transition Locator and Spectra Simulator) and temperatures electronic excitation of the atoms of dysprosium in the different discharge conditions were calculated (routine Electronic Temperature). The results showed that the electronic excitation temperature of the neutral dysprosium atoms in the hollow cathode discharge increases with increasing current applied to the cathode and also by increasing the gas pressure buffer. The determination coefficients, R2, obtained by the Electronic Temperature routine using the linear adjust of the Boltzmann Plot Method were greater... (Complete abstract click electronic access below)

Modelagem e simulação do mecanismo biela manivela e análise estrutural de biela automotiva

Nowadays, the automotive industry is working to optimize the design of engines, in order to reduce the fuel consumption with acceptable efficiency ratio. This undergraduate thesis is aimed at perform a kinematic/dynamic analysis of a slider-crank mechanism that is part of a four stroke internal combustion engine, the same engine that was used in the analysis described by Montazersadhd and Fatemi (2007). Two algorithms were developed based on Kane’s method to calculate velocities and accelerations of the mechanism bodies, and provide the acting forces at connecting rod joints. A SimMechanics model was developed to simulate the engine, and monitoring the same parameters that were calculated with the algorithms. The results obtained with both approaches were satisfactory and showed good agreement with the values provided by Montazersadhd and Fatemi (2007). The obtained results showed that the axial component of the rod joint efforts was caused by the pressure exerted on the piston head,whereas the radial component was related with the action of inertia loads. Besides, this thesis presents a connecting rod assembly mesh that is going to be used for static and fatigue finite element analysis in the future

Simulação de ciclo combinado utilizando software comercial

In Brazil, The power generation has always depended on the rivers, in other words, there are moments that the power generation can vary, which can cause variations in energy supply and even blackout according to the level of water in the reservoirs of the hydroelectric plants. For this reason, many options has been studied, like our example, which is about a combined cycle power plant in Canas. The use of combined cycle is interesting from the point o view of energy, because its efficiency is between 50 and 60%, and from the point of view of environment, because it can burn natural gas, which is cleaner than coal, it reduces the emission of gases that influence on the greenhouse effect. This work aims to perform a technical analysis of a case study of a power plant proposed to be built in Canas by the AES/AES Tietê Group. For the analysis will be used the commercial software GateCycle 6.0.0 from GE, this software has the power of simulating power generation cycles (nuclear, combined, etc.). The energy department of UNESP has the license, which makes possible the academic use of this tool. Two combined cycles were simulated, one using one pressure level HRSG, and another one closer to the real power plant, which is a combined cycle with a three pressure level HRSG. The results were close to expected, for the combined cycle with one pressure HRSG the power was 513,9 MW and a efficiency of 53,27%, in the case with the three pressure level HRSG the power was 517,1 MW and a efficiency of 53,5%. We conclude that the software requires that the user must have the knowledge about the subjects involved in the use of GateCycle in problems resolutions

Simulação de contaminação de sedimentos e águas subterrâneas por gasolina e álcool: um estudo de monitoramento de variações das propriedades físico-químicas

Geophysics studies in areas impacted by petroleum derivatives describe abnormalities of both low and high electrical resistivity (the opposite of electrical conductivity), confirmed as contaminant phase by chemical analysis: this contradiction can be explained by degrading processes that naturally occur and create sub products that can change the environment conductivity. Monitoring the variation of the parameters mentioned serves as a comparative basis to the variation in geoelectrical parameters, which identified the correlation between the same contaminant parameters and the difference between their behavior studied apart, as well as its relations with the biodegradation process. The results are applied to the fuel distribution and storage sectors, leading to the diagnosis and monitoring of possible groundwater contamination scenarios, and the knowledge of the area exposure time to the contaminant, besides the better remediation alternative and impacts control. Among some conclusions, the most significant are the decrease in conductivity over time, so as the increase in Eh value in the gasoline contaminated tank, as well as the decrease in the pH value in the second tank with ethanol, which can be attributed to its degradation. Comparing the variations in both tanks, it is evident that Eh, pH and electrical conductivity do not behave temporally in a similar way, although some correlations between Eh and pH can be related.

Pagamento por serviços ambientais: estudo de caso: simulação da aplicação do programa do “Produtor de Água” na bacia do Rio Pirajibu

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Simulação geoestatística e classificação numérica para o delineamento de unidade de mapeamento de atributos e erosão do solo

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Incidência, fatores de risco e consequências de defeitos congênitos em recém-nascidos e natimortos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Simulação computacional da extração líquido-líquido fracionada de enzimas para produção de biodiesel

Liquid-liquid extraction is utilized for purification of biomolecules by Aqueous Biphasic Systems (ABS), since this process does not damage the biotechnological potential of these compounds. In this work, using the free software Scilab®, the fractionated liquid-liquid extraction was studied aiming a lipase (target enzyme) partition in a water + PEG + DEX system. Lisozime was considered as contaminant. As computer simulations has been extensively used when a first estimation of technical feasibility of process is desired, this work demonstred that the system is viable for recovery the 80 % till 90 % the target enzyme, but should be noted that the trial aimed only the fractionation of the enzyme target of a contaminant, not its concentration, which should be done by another process.

Influência do plasma rico em plaquetas derivado do aspirado de medula óssea na cicatrização de defeitos periodontais: estudo histológico, histométrico e imunoistoquímico em ratos

Pós-graduação em Odontologia - FOA

Expansão térmica de nanotubos de carbono de duas camadas

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Avaliação dos efeitos do laser Er,Cr:YSGG em defeitos ósseos críticos e no tratamento de doença periodontal induzida em ratos submetidos a inalção de fumaça de cigarro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise histológica e histomorfométrica do processo de reparo de defeitos ósseos em ratos diabéticos preenchidos com osso autógeno e recobertos por membrana de matriz óssea homógena ou por membrana de politetrafluoretileno

Pós-graduação em Odontologia - FOA

Analise das emissões de CO2 e de energia - simulação com novas tecnologias siderúrgicas

The process of steel production emits a large quantity of greenhouse gases, specifically carbon dioxide (CO2), and the reduction of such emissions is one of the main challenges for the industry in the 21st. Century. To quantify these emissions, the Worldsteel Association (association of the 170 large steel manufacturers of the world) published a methodology (CO2 Emission Data Collection) for calculation and comparison of CO2 emissions among its members. After that, in 2010, this methodology became an ISO (International Organization for Standardization) norm. Today, the calculation of the CO2 emissions in steel making companies follow the ISO 14404-1 for units with blast furnaces and the ISO 14404-2 for units with electric furnaces. In the last years, new technologies were and continue to be developed for the steel making sector aiming at energetic improvements and greenhouse gas reductions (mainly CO2) by the several processes involved in the production of steel. This work had the objective of producing a tool to calculate the CO2 emissions for the steel making sector. An Excel spreadsheet was developed to calculate the emission intensities of CO2 of a steel plant, the Usina Presidente Vargas, of the Companhia Siderúrgica Nacional (CSN). The spreadsheet furnishes results of CO2 emissions and energetic fluxes, and simulates the benefits that some of the new technologies can give to the company. The spreadsheet calculates the emissions in two ways: a) based on the carbon fluxes that enter the unit, and b) based on the emissions of each specific process within the unit (coking, sinterization, blast furnace, among others)