Simulação numérica do processo de secagem de madeiras

Pós-graduação em Engenharia Mecânica - FEG

Produtividade e qualidade de grãos de canola em função da adubação nitrogenada e sulfatada

The canola (Brassica napus, L.) cultivation was encouraged for grain and oil production at the 80's, and it is also considered a good option for crop rotation. The nitrogen is one of the most required nutrients by the plant to increase its production, while sulfur is essential to provide seed quality. Thus, the objective of this study was, at Cerrado region, evaluate the effects of nitrogen and sulfur fertilization at yield and contents of oil and crude protein in the grains. We also sought relate to grain yield the S content in the soil and concentrations of N and S in the diagnosis leaf. The experiment was conducted in Uberaba County, State of Minas Gerais, Brazil, in an Oxisol, utilizing the Hyola 401 hybrid. The treatments consisted in a factorial scheme 5 x 4 (five N rates: 0, 60, 100, 140 and 180 kg ha(-1) and; four S rates: 0, 15, 30 and 60 kg ha(-1)) in a randomized blocks design, with four replicates. The nitrogen and sulfur fertilization increased canola grain yield, without significantly alter contents of oil and crude protein. Rates higher than to 140 kg ha(-1) of N and 15 kg ha(-1) of S provided grain yield above 1100 kg ha(-1). Plots with yield higher than to 1000 kg ha(-1) presented foliar concentration of N above 52 g kg(-1). The highest S content was observed at the 0.15-0.30 m layer, proving the sulfate anion mobility. The lowest grain yield were observed when the S content in the soil at this layer were less than 4 mg dm(-3). The N concentrations in the diagnostic leaf and S-SO4-2 content in the 0.15-0.30 m layer correlated positively with crop yield.

Adaptabilidade na produção de massa verde e grãos de genótipos de milho no Tocantins

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Digestibilidade e tempo de retenção dos grãos de sorgo processados durante a ensilagem em equinos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo da secagem natural e forçada das folhas de Corymbia Citriodora a partir da extração de óleos essenciais

Essential oils are products from plants and can be located in parts or in its entirety. There are several methods for its extraction, where the most suitable depends on the plant or the use of the essence. The main species cultivated in Brazil are the Corymbia citriodora, Eucalyptus globulus and Eucalyptus staigeriana. The Corymbia citriodora is a species that was introduced in Brazil along with other species, with the initial objective of timber production. The yield of oil can range from 0.5 % to 3.0% according to the literature and this can be optimized by reducing the moisture content of the leaves. Studies show that the lower water content in the leaves allows the vapor stream generated in the extractor can drag, more efficiently, the volatiles stored in the cells as compared with the green material. The drying of the sheets is important for companies, so that there is transport of water, increasing the volume of the sheets to distillation and hence a greater volume of oil. The objective of this study was to compare the drying methods, analyzing the income of the essence and determine the best method to optimize the yield of essential oil. Experimental tests were performed natural drying 10, 15 and 20 days and fluidized with times of 60, 90 and 120 minutes and after drying were extractions of the oil. The results obtained for fresh leave yield was 1.20 % and the drying time which showed the highest yield was 15 and 20 days with 2.90 % and 2.70 % yield, respectively, with the lowest level humidity of 16%. The yields obtained in fluidized bed drying did not change as the natural drying to between 1.64% and 1.7%. It is concluded that the decreased level of the sheets increases the yield of oil and the temperature in the fluidized bed is essential for the removal of water from the leaves necessary to increase the yield

Avaliação da viabilidade econômica do uso de um aquecedor solar de água de garrafas pet para aquecer o ar de uma cabine de pintura e uma estufa de secagem

Nowadays, the biggest part of the world's energy supply comes from fossil fuels and nuclear. However, the current need of the society for the preservation of the environment and wise use of natural resources, has favored the search for alternative energy sources and improvement of energy efficiency. In this new scenario, companies are beginning to mobilize in order to adapt its facilities to renewable energy. Solar, with its immense potential, not really exploited yet, can be very useful for companies that want to beat their sustainability goals. Given these facts, the aim is to evaluate the economic viability of introducing a solar water heater which uses a colorless PET bottle as one of its components in a plant. The hot water generated will heat the air of a paint booth and a warm house, reducing energy consumption, since they are heated by electric heaters

Grãos em carbonatos marinhos cretácicos da Bacia Potiguar: formações Ponta do Mel e Jandaíra

This work aims to identify and photograph grains that compose important Cretaceous carbonate units of the Potiguar Basin, represented by the Ponta do Mel and Jandaíra formations (Albian-Campanian). Petrographic investigation of thin sections was essential. The samples studied come from wells and surface samples from the collection UNESPetro – UNESP, Rio Claro. In the Ponta do Mel Formation, the grains consist of ooids, oncoids, peloids and bioclasts. Regarding to the identified bioclasts, the solenoporacean red algae, mollusks (bivalves and gastropods), echinoids, foraminifera, ostracods and worms were the dominant elements. In the Jandaíra Formation, the grains are composed by ooids, peloids and bioclasts, which are represented by green algae, mollusks (bivalves and gastropods), benthic foraminifera miliolids, worms, echinoderms and ostracods. The grains found in the Ponta do Mel Formation are somewhat similar to those found in the Jandaíra Formation, with the exception of calcareous algae. The subsurface material from the Ponta do Mel Formation is derived from the upper part of the unit, representing marine high-energy carbonates, which also contains ooids and Trocholina. The samples of Jandaíra Formation, collected in outcrops, often contain green algae, mollusks and miliolids, and come from inner shelf and lagoon facies previously described

Interação genótipo x ambiente para produção de grãos e podridões de colmo em milho

Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV

Avaliação das características físico-químicas e microbiológicas dos componentes fibrosos obtidos da moagem úmida de grãos de milho

Fibers are non-digestible materials by human organism, and they are insoluble in specific conditions. The corn fiber has been used as an alternative to enrich the food products for human consumption, in order to add nutritious value to this co-product. This study aimed at determining the chemical and fractions components of corn fiber, extracted by semi-wet milling in laboratory (LabF), and by semi-humid milling in industrial process (IndF); and microbiological analyses were perform in the last fraction. The fiber composition differed significantly among these two products as to moisture, ash, lipids, proteins, insoluble dietary fiber, neutral detergent fiber (NDF), acid detergent fiber (ADF), cellulose and lignin contents. The sample IndF showed microbiological parameters in compliance with the specifications for consumption. The investigated corn fiber may effectively contribute to increase the fiber intake in the diet. As the industrially processed fiber (IndF) showed compliant microbiological parameters with the specifications for food, this component might be incorporated into the food products formulation.

A influência da temperatura na secagem forçada da matéria-prima cerâmica da Formação Corumbataí na região do Polo de Santa Gertrudes (SP)

Pós-graduação em Geociências e Meio Ambiente - IGCE

Caracterização do lodo de esgoto, após desaguamento e secagem térmica, da Estação de Tratamento de Esgoto de Araraquara

Pós-graduação em Química - IQ

Atributos produtivos e qualitativos de grãos e fisiológicos e sanitários das sementes de cultivares de feijão

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Compostos bioativos e atividade sequestrante de radicais livres de quatro cultivares do Coffea arabica L. em diferentes estádios de maturação dos frutos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Determinação da matéria seca e teores de macronutrientes em folhas de frutíferas usando diferentes métodos de secagem

O objetivo desse estudo foi avaliar diferentes métodos de secagem de folhas para três diferentes frutíferas (maracujá, pêssego e abacate), com relação à determinação da matéria seca e os teores foliares de macronutrientes. Foram coletadas amostras de folhas recém expandida de três culturas, do pomar da fazenda de ensino e pesquisa da FCAV-UNESP, câmpus de Jaboticabal, no mês de janeiro de 2010, coletando-se para cada cultura 12 amostras com 25 folhas cada. Os tratamentos constituíram-se por dois métodos de secagem, estufa de circulação de ar forçada regulada a uma temperatura de 70°C e o forno microondas (FMO). Avaliou-se a massa da matéria seca e os teores foliares de macronutrientes. Os resultados sugerem que os dois métodos de secagem testados se assemelham na determinação de matéria seca e nos teores foliares de macronutrientes para as culturas análisadas, exceto os teores de cálcio na cultura do pêssego.

Grãos secos de destilaria com solúveis em dietas para tilápia-do-Nilo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)