Avaliação de diferentes tratamentos de superfície na resistência de união de cerâmica de di-silicato de lítio

Pós-graduação em Odontologia Restauradora - ICT

Efeitos dos agentes de impregnação e coberturas comestíveis sobre a secagem e sobre a qualidade física e nutricional do abacaxi

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE

As chuvas e as massas de ar no estado de Mato Grosso do Sul: estudo geográfico com vista à regionalização climática

Pós-graduação em Geografia - IGCE

Activity of some isoenzymatic systems in stored coffee grains

Considering the worldwide consumption of coffee, it is natural that throughout the history many people have dedicated the research to markers that contribute somehow on gauging its quality. This research aimed to evaluate the biochemical performance of arabica coffee during storage. Coffee in beans (natural) and in parchment (pulped) dried in concrete terrace and in dryer with heated air were packed in jute bags and stored in not controlled environmental conditions. Enzymatic activities of superoxide dismutase, catalase, peroxidase, polyphenoloxidase, esterase and lipoxygenase in coffee grains were evaluated at zero, three, six, nine and twelve months by means of electrophoresis. Independently of the drying method, the activity of isoenzymatic complexes highlighted deteriorative processes in stored grains of coffee. The treatments 60/40º C and 60º C used to reduce the water content imposed a greater stress condition, accelerated metabolism of natural coffee in the storage with decreased activity of defense mechanisms due to latent damage in these grains. Natural coffees are more sensible to high drying temperatures and its quality reduces faster than pulped coffee in the storage.

Crop optimization and pre-steps standardization to get a Bipolaris euphorbiae-based bioherbicide

Making bioproducts available to the market requires finding appropriate processes for mass production and formulation of biological agents. This study aimed at evaluating the Bipolaris euphorbiae production in a solid medium (fermentation in solid substrate) and in a biphasic system (growth in a liquid medium followed by growth in a solid medium), as well as determining the processes for collecting and drying conidia, under laboratory conditions. The influence of the incubation period and inoculum quantity were also investigated. The conidia were dried by using an oven (30ºC, 35ºC, 40ºC, 45ºC, 50ºC, 55ºC and 60ºC), and laminar flow, continuous air flow and aseptic chamber at room temperature. Dry conidia were obtained by sieving and grinding in a ball mill, hammer mill or grain grinder. The conidia viability and sporulation efficiency were evaluated in the solid medium and in the biphasic system. For growth period, the best sporulation on solid medium was obtained after 10 days of incubation, reaching 8.3 x 10(7) conidia g-1 of substrate. The biphasic system did not increase the B. euphorbiae sporulation (4.5 x 10(7) conidia g-1 of substrate), after 14 days, and the amount of liquid inoculum used in this system was not an important factor for increasing its production. The continuous air flow and laminar flow preserved the conidial viability (94.6% and 99.1%, respectively), while promoting a great moisture loss (62.6% and 54.0%, respectively). All the grinding processes reduced the conidia germination (86.2%, 10.5% and 12%, respectively), while sieving allowed the collecting of powdered conidia with high viability (94.8%).

Influência da fixação e de métodos de secagem na detecção de alterações proliferativas ultraestruturais induzidas pelo Diuron no urotélio vesical de ratos wistar

Pós-graduação em Patologia - FMB

Simulação numérica do processo de secagem de madeiras

Pós-graduação em Engenharia Mecânica - FEG

Comportamento térmico de coberturas em camadas duplas e estudo da substituição da cama por piso plástico na qualidade do ar, desempenho e índice de lesões em frangos de corte

Pós-graduação em Zootecnia - FCAV

Efeitos da exposição aos poluentes do ar com base nas internações por doenças cardiovasculares e respiratórias no município de Taubaté, SP

Pós-graduação em Engenharia Civil e Ambiental - FEB

Otimização ecológica dos ciclos ar-padrão Otto e Diesel

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Tratamento de águas oleosas oriundas do processo de produção de óleo de dendê utilizando a flotação por ar dissolvido

This study was developed to evaluate the performance of different coagulant and pH dosages by applying the use of Dissolved Air Flotation (FAD) to enable its use in effluent treatment of the extraction process of palm oil. The study was developed in the laboratory, where studies about emulsions stability were made for the production of a synthetic effluent which best suit the characteristics of raw effluent. The synthetic water that would be used in the tests of FAD was produced, once the stability and characterization which best approached the raw wastewater was obtained. Trials tested three coagulant doses, combined with various pH ranges and five upward velocities (Va), finding an optimal range of this combination. Some operating parameters such as time and gradient of rapid mixing (20 s / 1000 s-1), time and gradient flotation (15 min / 60 s-1), chamber pressure saturation (450 kPa) and recirculation rate (20%) were set. In this way, samples were collected for analysis of the removal of turbidity parameters, suspended solids and oils and greases. This one is obtained by a correlation turbidity x oils and greases, referring to the previous analysis. The degree of removal obtained were 73,97% for turbidity, 51,4% for total suspended solids and 86,2% for oils and greases. Removal rates may be increased in later studies, by ranging the velocity gradient and flocculation parameters and the recirculation ratio, and by using lower flotation speeds to these effluent characteristics.

Estudo da secagem natural e forçada das folhas de Corymbia Citriodora a partir da extração de óleos essenciais

Essential oils are products from plants and can be located in parts or in its entirety. There are several methods for its extraction, where the most suitable depends on the plant or the use of the essence. The main species cultivated in Brazil are the Corymbia citriodora, Eucalyptus globulus and Eucalyptus staigeriana. The Corymbia citriodora is a species that was introduced in Brazil along with other species, with the initial objective of timber production. The yield of oil can range from 0.5 % to 3.0% according to the literature and this can be optimized by reducing the moisture content of the leaves. Studies show that the lower water content in the leaves allows the vapor stream generated in the extractor can drag, more efficiently, the volatiles stored in the cells as compared with the green material. The drying of the sheets is important for companies, so that there is transport of water, increasing the volume of the sheets to distillation and hence a greater volume of oil. The objective of this study was to compare the drying methods, analyzing the income of the essence and determine the best method to optimize the yield of essential oil. Experimental tests were performed natural drying 10, 15 and 20 days and fluidized with times of 60, 90 and 120 minutes and after drying were extractions of the oil. The results obtained for fresh leave yield was 1.20 % and the drying time which showed the highest yield was 15 and 20 days with 2.90 % and 2.70 % yield, respectively, with the lowest level humidity of 16%. The yields obtained in fluidized bed drying did not change as the natural drying to between 1.64% and 1.7%. It is concluded that the decreased level of the sheets increases the yield of oil and the temperature in the fluidized bed is essential for the removal of water from the leaves necessary to increase the yield

Estudo de cargas térmicas de uma aeronave e dimensionamento de um sistema de ar condicionado

This work deals with the thermal load study of a fictitious aircraft as well as scaling, in terms of the airflow and temperature of the air conditioning system, for heating and cooling of the its internal environment, aiming the thermal comfort of occupants. The first part is presented the techniques and methods utilized for modeling different heat exchanges that occur in the aircraft and then allowed to calculate the total heat load and the airflow and temperature necessary to comply with the requirements of the thermal comfort. Techniques to determine the basic parameters, as convection coefficient and global coefficient of heat exchange, are also presented. The work aims to develop a program, using a computational tool, to automate the calculations so that facilitate this study. It also allows to be used for other airplanes just changing parameters and the control variables related to the specific project. Finally the program performs calculations for a fictitious airplane, to analyze its functionality and the influence of parameters involved in the temperature controls. The program allowed analyzing the sensitivity of portions of the thermal load and the corresponding parameters of influence, as well as the scaling of the air conditioning in terms of airflow and temperature. It was considered, despite the simplifications, a good approximation to the actual values and then can be used in development of the other airplanes

Eficiência energética em ar condicionado e refrigeração através da aplicação da termoacumulação

The use of refrigeration and air conditioning systems is of fundamental importance when it comes to air-conditioning of environments. Also important is the use of electricity for equipments’ operation related to these systems. Due to high cost of charging for this type of energy, factors economy and efficiency occupy key roles among design parameters of a system. One of the ways to get this economy is the use of a technique called thermal storage, or cold storage, which intends to move the required loads during peak time and also their equalizing, so that the energy is transferred from the peak time to non-peak time, thereby reducing the cost of energy consumed. Cold can be stored in the form of ice or ice water. This work aims to perform a technical-economic analysis of a mall located in Vale do Paraíba checking the feasibility of deploying a thermal storage system to achieve an economy in the cost of the energy used by the establishment. Through the parameters measured by the concessionaire of energy we can get the values of energy demand and power consumed, which will serve as basis for calculation for the study. The results obtained allow the development of two alternative proposals to the current configuration, one chosen by the criteria and results presented by technical-economic and energy analysis