Uso de biossólido como substrate para produção de mudas de eucalipto

The objective of this study was to evaluate the feasibility of the biosolids used as substrate component for seedlings production of Eucalyptus. This way, different proportions of biosolid/carbonized rice (80/20, 70/30, 60/40, 50/05 and 40/60) were tested as substrates in mixture, which were compared to the common substrate used by forest nursery (Multiplant®), as control. The experiment was established with Eucalyptus grandis where growth seedlings-related parameters were assessed: shoot height, collar diameter, accumulation of dry matter on the shoot and root, chemical analysis of the vegetal tissue of aerial part and root, foliar area and chlorophyll content. The results revealed that Eucalypts seedlings developed in substrate with 50% biosolid were similar to the control in relation to the evaluated parameters, concluding that the use of biosolids for seedlings production is quite promising.

Avaliação da distribuição da densidade em MDF a partir da técnica da onda de ultra-som

The goal of this research was to determine the density distribution in medium density fiberboard (MDF), manufactured with polyurethane derived from castor oil using, ultrasonic wave technique. The equipment used in this test is Steinkamp BP7 with plan and exponential transducers, both with 45 kHz frequencies, located in several zones on the plate in order to determine wave ultrasonic velocity. The Pinus caribaea and Eucalyptus grandis fiberboard were manufactured in the quality control and products development laboratory of Duratex with 500 mm long, 500 mm large, 8 and 15 mm of thickness. Three MDF for each fiber specimen and thickness were fabricated, totalizing twelve plates tested. The MDF were produced with 5% polyurethane addition, in temperature of 160°C, tension press of 53 bars and addition of moisture content of 12%. For determination of fiberboard density, samples were extracted from the same zones where the wave ultrasonic velocity was determined. In this case, DAX-Ray equipment was used. Statistical analysis shows good agreement with wave ultrasonic velocity and the density profile, validating the application of non-destructive technique in order to determine the density profile of MDF's.

Desenvolvimentos da biopolpação no Brasil

Biopulping is a technology which application can be advantageous to mechanical or chemical pulping. It presents benefits such as the creation of stronger pulp, as well as energy or chemicals savings. This paper gives an overview of the recent efforts to develop biopulping processes in Brazil as well as provides critical information on biopulping development worldwide. Eucalyptus grandis wood chips have been biotreated by Ceriporiopsis subvermispora in a 50-ton biopulping pilot-plant and used to produce TMP and CTMP pulps on a mill scale, Up to 18% and 27% energy savings have been observed for producing 450-470 CSFreeness TMP and CTMP pulps. Despite darker bio-TMP pulps are produced, one-stage bleaching with 5% H2O2 was sufficient to improve brightness values to 70% and 72% for bio-TMP and control pulps, respectively. Understanding biopulping mechanisms is also relevant because more resistant and competitive fungal species could be selected with basis on a function-directed screen-ing project. As far as the chemical changes induced by the fungus in wood are concerned, recent efforts have pointed out for two different types of wood transformations. One of them involves intense lignin depolymerization in short biotreatment periods, while the other indicates that esterification reactions of oxalate secreted by the Jungas on the polysaccharides chains increase the water saturation point of the fibers. Both transformations are expected to affect the fiber-fiber bonding and, consequently, the physical resistance of wood.

Eficiência de uso de boro no crescimento de clones de eucalipto em vasos

This paper evaluated the critical level, responsivity and boron use effciency on growth and the biomass production in six Eucalyptus grandis x Eucalyptus urophylla clones (Ca, Cb, Cc, Cd, Ce and Cf). An experiment was carried out in pots containing ground silicon, under greenhouse conditions using four boron rates per solution (0; 0.135; 0.27; 0.54 mg L -1 of B). The treatments were combined in a randomized block experimental design in a 4 × 6 factorial scheme with three replications. Plant height, stem diameter, dry matter production in the shoots of the plant and boron use effciency in the leaves, stem and total dry matter at the 8th month of age were evaluated. Due to boron fertilization, growth and shoot biomass were observed in the Eucalyptus plants after 240 days of being planted in pots. The increases in growth and biomass were 35 to 54% and 21 to 64%, respectively. The boron rates that promoted major growth of the plants were 0.33 to 0.44 mg L -1 of B and in this range the most effcient clone for dry matter production of leaves was Cf and the least effcient one to stem biomass production and the shoot biomass was Cd, no signifcant differences among other clones were observed. The critical level of boron in solution was 0.09 to 0.24 mg L -1 of B in the growth of the plants.

Osteologia craniana de Nyctibiidae (Aves, Caprimulgiformes)

The Potoos form an exclusively neotropical family of nocturnal birds distributed throughout Central and South America, except Chile, and reaching their highest diversity in the Amazon region. The seven currently recognized species are certainly among the most poorly known birds of this region. They are characterized by a distinctive mimicry of vegetal trunks, where they remain almost motionless during daytime. For this reason, their nocturnal and cryptic habits make them exceedingly difficult to study. Published accounts on behavior and natural history of the family are scarce and contributions regarding its anatomy are rare. Here we sample six of the seven currently recognized species of Nyctibiidae, including Nyctibius grandis, N. aethereus, N. griseus, N. jamaicensis, N. leucopterus and N. bracteatus, in order to conduct a detailed and illustrated description of the skull and jaw osteology. High interspecific variation in skull osteology was observed in the family. Species of this family possess a highly modified skull, adapted to their life habits, which shelters their well developed eyes and permits a large mouth opening. The bones that form the palate structure exhibit a dorsoventral flattening, particularly in the pterigoid and parasphenoid bones, with the palatine bone being a broadly developed, wing-shaped structure. In the maxilar region, near the jugal arch, there is a tooth-like projection, unique among birds, which may assist in the retention of prey upon capture. The vomer bone is highly variable within the family, showing varying numbers of rostral projections amongst species. The broad occipital region exhibits large spacing between the quadrate bones, which are vertically disposed and possess a reduced processus orbitalis. The mandible, which is flexible and elastic, has an extremely short symphyseal region and sindesmotic joints in both mandibular rami. As a family, potoos possess a highly specialized skull which provides insight into the relationship between the form of the structures and the feeding habits of the species. Furthermore, the large interspecific variation in skull morphology emphasizes the needs for taxonomic revision within the family, which at present is lumped into a single genus.

Índice de infestação e fatores de mortalidade do bicudo-do-algodoeiro (Coleoptera: Curculionidae) no semi-árido do sudoeste da Bahia, Brasil

The boll weevil (Anthonomus grandis Boheman, 1843) (Coleoptera: Curculionidae) is a pest that limits the production of cotton, especially in the North East of Brazil. The present study aimed to estimate the infestation index and natural mortality of boll weevil at Caraibas County, located in the semi-arid of the Southwest ofBahia. The experiment was performed using the cultivar BSR Aroeira, at Fazenda Lagoa Seca, in 2006. Weekly evaluations were performed, in five sampling areas 25m2, collecting blossoms fallen on the ground. The infestation was estimated by counting the oviposition punctures and /or the feeding on blossoms, and also by the presence of one of the phases of the boll weevil in the inside. Mortality factors were studied through the dissection of blossoms, estimating predation, parasitism, dissection and disease. The results obtained allowed to conclude that the boll weevil determines high infestation levels in the region. Parasitism, dissection and predation, following this order, determine high rates of real mortality of the pest. Catolaccus grandis Burks, 1954 (Hymenoptera: Pteromalidae) and Bracon sp.(Hymenoptera: Braconidae) are parasitoids of boll weevil reported in sothwestern Bahia, being the first one the predominant species. © 2009, Sociedad Venezolana de Entomología.

Análise de crescimento em clones de eucalipto submetidos a estresse hídrico

The aim of this study was to evaluate Eucaliptus grandis genotypes (Clones 105 and 433) in relation to drought tolerance, through growth plant analysis. Black PVC pots with 10 liter volume were used for cultivate plants in polyethilene greenhouse oriented east/west. Completely randonmized design with four treatments was used: two clones and two minimum soil water potentials (- 0.03 and -1,5 MPa) and sixteen replicates. Pots were weighed daily in order to evaluate water content and characteristic soli water curve was determined. Plant development was obtained each 15 days from planting until 60 days through total dry matter (DM), leaf area index (LAI), leaf area ratio (LAR), net assimilative ratio (NAR), specific leaf area (SLA), relative growth ratio (RGR) and absolute growth ratio (AGR). Results showed that clone 105 presented less sensibility to water deficit, which qualify it as genetic material for use under dry soil conditons. On the other hand, both clones had similar behavior with no water restrictions.

Portable Hardness tester for timber classification

Hardness is a property largely used in material specifications, mechanical and metallurgical research and quality control of several materials. Specifically for timber, Janka hardness is a simple, quick and easy test, with good correlations with the compression parallel to grain strength, a strong reference in structural classification for this material. More recently, international studies have reported the use of Brinell hardness for timber assessment which resumes the advantages previously mentioned for Janka hardness and make it easier to be performed in the field, especially because of the lower magnitude of the involved loads. A first generation of an equipment for field evaluation of hardness in wood - Portable Hardness tester for wood - based on Brinell hardness has already been developed by the Research Group on Forest Products from FCA/UNESP, Brazil, with very good correlations between the evaluated hardness and several other mechanical properties of the material when performing tests with different species of native and reforested wood (traditionally used as ties - sleepers - in railways). This paper presents results obtained in the experimental program with the first generation of this equipment and preliminary tests with its second generation, which uses accelerometers to substitute the indentation measurements in wood. For the first generation of the equipment functional and calibration tests were carried out using 16 native and reforestation timber lots, among there E. citriodora, E. tereticornis, E. saligna, E. urophylla, E. grandis, Goupia glabra and Bagassa guianenses, with different origins and ages. The results obtained confirm its potential in the classification of specimens, with inclusion errors varying from 4.5% to 16.6%.

Crescimento inicial do eucalipto em função da aclimatação em viveiro

This study aimed to evaluate the acclimatization effects in the Eucalyptus grandis vs. Eucalyptus urophylla seedlings nursery in their initial growth in two soils types, clay and sandy. The seedlings were planted in Plantmax substrate and in rice hulls plus vermiculite, and managed, after 60 days of the mass propagation (DAE), during the rustication. There were five different frequencies of subsurface drip irrigation, restoring the soil field capacity condition: F1, F2, F3 and F4, which were irrigated once, twice, three and four times a day, respectively, and FD, kept in continue irrigation until planting at 90 DAE. In a randomized block design with four replications, plant height (HPA) were evaluated at 6 and 13 months after planting and the diameter at breast height (DAP) at 13 months after planting. Findings show that water management at hardening phase seedlings had no influence on growth in both soils.

Comportamento e variação de procedências de Corymbia citriodora em diferentes tipos de solos

The aim of this study was the selection of Corymbia citriodora provenances for three different kinds of soils occurring in Luiz Antônio Experimental Station, São Paulo, Brazil (Latossolo Vermelho, Areia Quartzosa and Latossolo Roxo). The provenance test was established in 1983, with ten Corymbia citriodora provenances and one Eucalyptus grandis as control, original from a seed production area. The trials were established in a random block design with 11 treatments, three repetition and square plots with 25 trees. In 2008, there were evaluations of height, diameter at breast height (DBH, 1.3 m), stem form and survival. Significant differences among soils and provenances were detected for the growth traits, stem form and survival in all those studied soils. Significant provenance and soil interactions were not detected. All provenances showed higher growth in height and DBH in Purple Latosol. The control had a higher growth rate in relation to highness, DBH and stem form than Corymbia citriodora provenances in all the studied soils, but it presented, generally, a lower survival rate than Corymbia citriodora provenances. Pederneiras (11) Corymbia citriodora provenance presented a higher performance in relation to highness and DBH in all kinds of soils, and Gilgandra (4) provenance, original from Australia, had the worst development. Therefore, Pederneiras (11) provenance is, therefore, the best choose for reforestations in all those studied soils.

Expression of a new Bacillus thuringiensis Cry1Ia gene in Escherichia coli with strong activity against cotton pests

The control of cotton pests may be accomplished using Bacillus thuringiensis Cry proteins. For this purpose, the objective of this work was to evaluate the insecticidal activity of a new Cry1Ia protein against neonatal larvae of Spodoptera frugiperda and Anthonomus grandis. The complete cry1Ia gene, previously obtained by PCR with oligonucleotide primers based on the sequenced gene, was cloned into the vector pET28a(+), introduced into Escherichia coli BL21(DE3) and expressed by induction with IPTG. The expression of the Cry1Ia protein was confirmed with molecular weight of approximately 81 kDa. The results demonstrated the efficiency of the bacterial system for the expression of B. thuringiensis Cry1Ia protein, which was subsequently used in quantitative bioassays against S. frugiperda and A. grandis larvae, resulting in an extremely toxic protein for both species. This characteristic is exceptionally important for obtaining transgenic cotton plants resistant to these pests.

Attractiveness and oviposition preference of Glycaspis brimblecombei Moore in Eucalyptus spp.

The red gum lerp psyllid Glycaspis brimblecombei Moore (Hemiptera: Psyllidae) was first recorded in Brazil in 2003 and since then has caused serious damage in Eucalyptus forests. The damage is mainly due to defoliation, sooty mold and dieback, thus requiring the development of efficient management strategies. The settling and ovipositional preference of G. brimblecombei by species and clones of Eucalyptus were evaluated in free- and no-choice tests. Preliminary tests were done to determine the density of psyllid couples that produced the greatest densities of eggs, leaf position selection for oviposition, and whether oviposition was affected by preimaginal conditioning. Apical leaves were used more frequently for oviposition by the psyllid, and the number of eggs decreased from the apex to the base. The densities of 10 and 15 psyllid couples per seedling produced the highest oviposition. There was no evidence of preimaginal conditioning. In the free-choice test, E. grandis, E. urophylla, VM-1, I-144, C-219 and H-13 were less attractive to G. brimblecombei adults, with H-13, E. grandis and E. urophylla having the least oviposition. In the no-choice test, E. urophylla, GG-100 and E. grandis also demonstrated a lower oviposition, but E. camaldulensis and 3025 were highly susceptible. The low preference for the genotypes E. grandis and E. urophylla suggests the occurrence of a non-preference type resistance against the red gum lerp psyllid. Our results can be utilized for the development of management programs for G. brimblecombei in Eucalyptus forests. © 2012 Springer Science + Business Media B.V.

Qualidade de mudas seminais de eucalipto em função dos substratos e fertilização de liberação controlada

For the production of quality seedlings, depending on the physical characteristics of each substrate, more rational nutritional managements, from the of economic-environmental point of view, should be sought. This study aimed to evaluate the development and quality of Eucalyptus grandis × E. urophylla seedlings in terms of substrates and doses of controlledrelease Osmocote® fertilizer. The experiment was conducted with a completely randomized, factorial design, using as substrates: vermiculite+carbonized rice chaff+coconut fiber (1:1:1); vermiculite+coconut fiber (1:1) and vermiculite+coconut fiber (2:1) and doses of 2, 4, 6 and 8kg·m -3 of substrate. The substrates with higher water holding capacity allow seedlings to reach their maximum development in most parameters using lower doses of controlled-release fertilizer. We recommend the application of the controlled-release fertilizer at a dose of 6.0kg·m-3 in vermiculite+carbonized rice chaff+coconut fiber (1:1:1) and vermiculite+coconut fiber (2:1) substrates, and in substrate vermiculite+coconut fiber (1:1) at a dose of 7.0kg·m-3. In each substrate there is a dose range that promotes a greater formation of suitable root systems for planting in the field, which consequently results in seedlings with greater morphological development at nursery.

Resistência de genótipos de eucalipto a ceratocystis spp

Eucalyptus is the most important plantation forest species in Brazil. Wilt and canker caused by Ceratocystis fimbriata on eucalyptus were first reported in 1998 in plantations of an E. grandis × E. urophylla hybrid in southern Bahia, Brazil. This work aimed at studying the reaction of different eucalyptus genotypes after inoculation with C. fimbriata isolates, in order to find a possible source of resistance. The study included four isolates of Ceratocystis collected from eucalyptus in different regions. One disc of fungal mycelium with 1-cm-diameter (from colonies growing for 10 days on malt extract agar medium-MEA) was inoculated on the stem of thus injured eucalyptus plants (six months old). A cotton wool moistened with sterile distilled water was wrapped with plastic film. Control plants were inoculated with discs of MEA without fungal colonies. The inoculated plants were kept in a greenhouse. Wilt symptoms were observed 90 days after inoculation. The seedlings were cut in the longitudinal direction of the stem in order to observe the colonization of fungus in the plant xylem. We tested twenty eucalyptus genotypes, but only five showed resistance to all isolates of Ceratocystis, belonging to different species of Eucalyptus: E. urophylla (C2 and C9), E. grandis (C3), E. saligna (C6 and C13) Most E. gramdis genotypes were more susceptible to all four fungal isolates. These results support future studies related to eucalyptus resistance to Ceratocystis.

Mixing Eucalyptus and Acacia trees leads to fine root over-yielding and vertical segregation between species

The consequences of diversity on belowground processes are still poorly known in tropical forests. The distributions of very fine roots (diameter <1 mm) and fine roots (diameter <3 mm) were studied in a randomized block design close to the harvest age of fast-growing plantations. A replacement series was set up in Brazil with mono-specific Eucalyptus grandis (100E) and Acacia mangium (100A) stands and a mixture with the same stocking density and 50 % of each species (50A:50E). The total fine root (FR) biomass down to a depth of 2 m was about 27 % higher in 50A:50E than in 100A and 100E. Fine root over-yielding in 50A:50E resulted from a 72 % rise in E. grandis fine root biomass per tree relative to 100E, whereas A. mangium FR biomass per tree was 17 % lower than in 100A. Mixing A. mangium with E. grandis trees led to a drop in A. mangium FR biomass in the upper 50 cm of soil relative to 100A, partially balanced by a rise in deep soil layers. Our results highlight similarities in the effects of directional resources on leaf and FR distributions in the mixture, with A. mangium leaves below the E. grandis canopy and a low density of A. mangium fine roots in the resource-rich soil layers relative to monospecific stands. The vertical segregation of resource-absorbing organs did not lead to niche complementarity expected to increase the total biomass production. © 2012 Springer-Verlag Berlin Heidelberg.