Televisão analógica e televisão digital: o futuro do telejornalismo

This study proposes to present the process of implementation of Digital TV, the available resources found in the Japanese standard employed in the country and the form in which news programs will adapt to the new technology. Following the presentation of the technological tools, the current state of Brazilian television is discussed, focusing on two nationally broadcast programs, Jornal da Band on Bandeirantes channel and Jornal da Record on Record channel. As a case study, three editions of each show are evaluated with an individual and comparative analysis. Following the analyses, perspectives on the future of television journalism in the digital TV age are given. Additionally, the possibilities for interaction between the TV viewer and the channel and the forms of interaction that may exist within particular programs are discussed, thus allowing for active participation from the part of the viewer. The newly developed functions of journalists in the digital age are also broken down in the research. In order to gain a full understanding of the phases of this process of technological convergence and how programs will adapt to these tools, interviews with professionals who work in the production of televised news programs are conducted in the study

Estudo da anatomia interna dos incisivos laterais superiores pelos métodos radiográficos digital e convencional

The maxillary lateral incisor has a very peculiar and internal morphology that can be influenced by the its external anatomy such as supernumerary roots and ruts deep root, which often hinders an effective endodontic treatment. Generally, this tooth have a single root with one root canal, but teeth with two to four channels can be found. The main canal can present ramifications such as accessory canals, laterals, collaterals, recorrents and apical deltas. All this factors interfere directally on endodonthics treatment. The objective of this work is a study of the internal anatomy of the maxillary lateral incisors by digital and conventional radiographics methods, comparing the results obteined by each method Six hundred upper lateral incisor were used in this study teeth of the collection of the Department of Anatomy ICT – UNESP. All the teeth were radiographed by vestibular face, using a digital radiographic unit(Dabi Atlante). After this step, all the teeth underwent by conventional radiographic technique(Kodak 2200) so that the results obtained were compared. To classify the channel system, it was adopted the classification of Pucci and Reig. All data obtained by digital technique were compared with those obtained in the conventional technique and were subjected to statistical analysis

Anteprojeto de um sistema digital de proteção e controle aplicado em uma subestação elétrica industrial

With the growth of the demand on electric energy in the last decades, the urban distribution and transmission systems have experienced a bigger necessity to improve on the substations, the automation procedures and techniques on the operation maneuvers of such systems, in a sense that better attends the quality levels, availability, continuity and operational reliability. In this way, the objective of the present paper is to perform a study of protection and control on an electrical industrial system involving the procedures of digitizing and maneuvers automatism utilizing operational techniques and other pertinent information used in a typical high-voltage Industrial Electrical System. Analysis were made on short-circuits to specify the main components of the 138 [kV] substation, in addition, there were used digital MiCOM relays to make the protection of the present elements. With that, a program was developed to allow the user to monitor the condition of circuit-breakers through a supervision screen being able to simulate some kinds of faults, as well as observing the characteristics of each device. This way, the importance of having a fast and reliable system that ensures the equipment’s protection and the industrial process continuity due to faults on the electrical system is noticeable. It’s important to highlight that all this digitizing was mainly favored by the development of digital technology on the last years, mainly on microelectronics, also with the appearance of supervision gadgets allowing the development of complex systems in supervision and electric energy control

Relações públicas aplicadas à comunicação pública digital: conceitos, práticas e recomendações

The increasing amount of information about public management conveyed by government electronic portals in the internet has attracted the attention of scientific research, which has resulted in reviews of the contribution of such channels of public communication for the expansion of citizenship. It is the duty of the government to inform citizens effectively as well as using effective language to deal with different ways of relating with each public. Based on data collected in the official social media of state government during search for Scientific Initiation PIBIC/CNPq entitled “Digital Democracy and Social Networks: Analysis of Use of Internet by the Government of State of Sao Paulo” and official strategic manuals of the first industry this work of course completion has analyzed practices and recommendations of the area to contribute to the development of strategies of public communication

A narrativa audiovisual da transmissão direta e ao vivo da copa do mundo da FIFA: comparação entre a televisão analógica e a digital

Pós-graduação em Comunicação - FAAC

Cultura digital e educação para a mídia: análise do programa Mídias na educação

Pós-graduação em Comunicação - FAAC

Televisão digital interativa na educação: desenvolvimento de um conteúdo. complementar ao ensino

This work had as objective the development of a prototype of educational content, as an experimental process, making use of resources from Interactive Digital TV. The characteristics of interactive digital terrestrial television are presented, in the form of a media mode capable of performing as a complementary source to education. The methodology used is composed of four phases: deduction, analysis, induction and synthesis. Its conception takes as issue the expressed need stated by UNESCO to use ICT (Information and Communications Technology) towards education, as well as the possibility of applying digital television in an educational process. The content is structured in the form of a quiz, a type of question-answer game as an informal way of education for high school students. The prototype developed in this work is presented as a structural script and map, taking into account the necessary activities and routines to put it into operation in the tested environments, eclipse, virtual set-top-box and Developer Box. The practice of prototyping was carried out in NCLua, based on middleware Ginga. As a result, we concluded that Ginga offers enough support to carry out the task, providing characteristics of interaction to publish the proposed content, at the moment of the actual practice.

Digital radiography for determination of primary tooth length: in vivo and ex vivo studies

Background. Methods for determining the root canal length of the primary tooth should yield accurate and reproducible results. In vitro studies show some limitations, which do not allow their findings to be directly transferred to a clinical situation. Aim. To compare the accuracy of radiographic tooth length obtained from in vivo digital radiograph with that obtained from ex vivo digital radiograph. Method. Direct digital radiographs of 20 upper primary incisors were performed in teeth (2/3 radicular resorption) that were radiographed by an intraoral sensor, according to the long-cone technique. Teeth were extracted, measured, and mounted in a resin block, and then radiographic template was used to standardise the sensor-target distance (30 cm). The apparent tooth length (APTL) was obtained from the computer screen by means of an electronic ruler accompanying the digital radiography software (CDR 2.0), whereas the actual tooth length (ACTL) was obtained by means of a digital calliper following extraction. Data were compared to the ACTL by variance analysis and Pearson’s correlation test. Results. The values for APTL obtained from in vivo radiography were slightly underestimated, whereas those values obtained from ex vivo were slightly overestimated. No significance was observed between APTL and ACTL. Conclusion. The length of primary teeth estimated by in vivo and ex vivo comparisons using digital radiography was found to be similar to the actual tooth length.

Incomplete vertical root fracture associated with lateral compaction technique: a microscopic analysis

Objective: This study evaluated the effects of root canal obturation employing lateral compaction technique and spreader load of 1.5 kg on the incidence of complete (CVRF) or incomplete vertical root fractures (IVRF). Material and Methods: Twenty-seven distal roots of extracted human mandibular molars were used. All root canals were prepared by biomechanical step-back technique and obturated by lateral compaction technique. The prepared roots were distributed into two groups: G1- experimental (n = 17) and G2- control (n = 10). During obturation, load of 1.5 kg was applied to a size # 30 finger spreader. Pre- and post-obturation images of the coronal portion of the roots were captured by inverted digital microscopy and analyzed by one trained examiner. Data were evaluated by Fisher’s test (p < 0.05) using GrapH Pad Prism 5.0. Results: No roots exhibited CVRF. All fractures observed before and after obturation were IVRF or “other defects”. In G2 (control group), there was no increase of IVRF number. Interestingly, G1 presented an increase in the IVRF number to 70.59% in the 12 teeth out of 17 teeth studied. The statistical analysis showed that the mean of IVRF increased significantly in G1 when compared to G2 (p < 0.05). Conclusion: The application of a 1.5 kg spreader load during lateral compaction technique does not produce complete vertical root fractures, but may produce incomplete fractures or “other defects”.

In-Office dental bleaching efficacy assessment in function of the light exposure regime by digital colometric reflectance spectroscopy

In-office dental bleaching has been subject of several studies. Generally those studies quantify through visual analysis, the shade reduction of the teeth submitted to different bleaching protocols (light sources, bleaching agent concentrations and irradiation time). The objective of this work is the determination of the influence of four irradiation protocols on the obtainment of better aesthetic results using a colorimetric spectrophotometer that quantifies color changes in each situation imposed. Forty bovine incisors were selected in function of similar anatomic characteristics; a concentrated coffee solution was used to stain the teeth. A commercial spectrophotometer was used to measure the color changes during evolution of the experiment (stain and bleaching phases) and the obtained data was analyzed by the ANOVA test. The obtained data showed the evolution of teeth color during the staining period, as well as, the color reduction that each bleaching protocol achieved. Based on our findings it is possible to conclude that bleaching protocols with larger irradiation periods did not showed significant differences when compared with shorter irradiation protocols, in that way the use of protocols with 30 min or more of consecutive irradiation are not clinically justified and also can cause several side effects.

Tecnologias virtuais e análise videográfica: o YouTube® como recurso de pesquisa para compreensão sobre a imagem do idoso brasileiro = Virtual technologies and videographic analysis : YouTube® as research resource for understanding about brazilian elderly imagem

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

O cenário do rádio digital em Ribeirão Preto

Pós-graduação em Ciências Sociais - FCLAR

Prevalence of the hepatitis C virus among university employees in São Paulo, southeastern Brazil: predictive factors and geoprocessing spatial analysis

Background There are limited studies on the prevalence and risk factors associated with hepatitis C virus (HCV) infection. Objective Identify the prevalence and risk factors for HCV infection in university employees of the state of São Paulo, Brazil. Methods Digital serological tests for anti-HCV have been performed in 3153 volunteers. For the application of digital testing was necessary to withdraw a drop of blood through a needlestick. The positive cases were performed for genotyping and RNA. Chi-square and Fisher’s exact test were used, with P-value <0.05 indicating statistical significance. Univariate and multivariate logistic regression were also used. Results Prevalence of anti-HCV was 0.7%. The risk factors associated with HCV infection were: age >40 years, blood transfusion, injectable drugs, inhalable drugs (InDU), injectable Gluconergam®, glass syringes, tattoos, hemodialysis and sexual promiscuity. Age (P=0.01, OR 5.6, CI 1.4 to 22.8), InDU (P<0.0001, OR=96.8, CI 24.1 to 388.2), Gluconergam® (P=0.0009, OR=44.4, CI 4.7 to 412.7) and hemodialysis (P=0.0004, OR=90.1, CI 7.5 – 407.1) were independent predictors. Spatial analysis of the prevalence with socioeconomic indices, Gross Domestic Product and Human Development Index by the geoprocessing technique showed no positive correlation. Conclusions The prevalence of HCV infection was 0.7%. The independent risk factors for HCV infection were age, InDU, Gluconergan® and hemodialysis. There was no spatial correlation of HCV prevalence with local economic factors.

Analysis of acoustic frequency and wave amplitude generated by the Oscillatory Thoracic Thixotropic Device (Diottix(r)) in human chest

Diottix(r) was calibrated at 25 Hz to achieve the frequency indicated in literature as being effective to mobilize the airways secretions. However, the amplitude and frequency of the waves generated by the equipment in different regions of the chest still need to be investigated. The objective of this study was to analyze the frequency and amplitude of waves generated by Diottix(r) in chests of healthy subjects. Diottix(r) was used in the anterior and posterior regions of the chest. The mechanical waves were captured using stethoscopes connected to electret microphones, which were connected to a digital oscilloscope. Frequency and amplitude data were recorded by the stethoscope, positioned in six points in the anterior region and six in the posterior region of the chest, following the positions commonly used in pulmonary auscultation. Signals were recorded and transferred to a computer with software for their analysis. The frequency of waves did not present a significant change (from 24.9 to 26.4 Hz). The wave amplitude in the anterior versus the posterior region in each area of the lung, the upper, middle and lower, had differences. Diottix(r) produces frequencies in the chest according to the calibrated; thus, it can be a complementary resource to bronchial hygiene maneuvers. The amplitudes of waves seem to be affected by other structures like bone parts and heart.

Avaliação das características do líquido ruminal associada à termografia digital e atividade pedométria em vacas holandesas

Pós-graduação em Medicina Veterinária - FMVZ