226 resultados para Consumo de água : Indústria
Resumo:
Aquatic ecosystems are suffering many impacts caused by human activities resulting from the activities occurring around them. With technological progress observed in recent years, this environment has received large amounts of chemicals from industries, agriculture and urban area that affect the aquatic biota. Among these sources of contamination, the oil industry has contributed to the pollution of aquatic environments with both effluents as produced water well as oil spills and their derivatives having toxicity to various organisms. With all the environmental issues has increased concern about water quality and has been used ecotoxicological tests with aquatic organisms to ecosystems to assess the toxicity of chemicals present in the water. In this context the microcrustacea Daphnia similis stands out as a freshwater organism very representative of the aquatic fauna of rivers and high sensitivity to environmental impacts. Thus, the present study aimed to evaluate the lethal toxicity of crude oil and produced water on this microcrustacea. The results showed that the microcrustacea presented high sensitivity to contaminants primarily crude oil. There was also the influence of environmental variables pH and temperature on the survival of organisms
Resumo:
The purpose of this project is to verify whether anaerobic reactors applied to sewage treatment are energetically self-sufficient. This evaluation can be made by balancing the methane produced through the anaerobic transformation stages (hydrolysis, acidogenesis, acetogenesis and methanogenesis) and the reactor energy consumption requirements. The original project included methanogenic activity tests, which could not be performed due to setbacks in the installation of an analytical instrument. Scientific articles about bench- and full-scale anaerobic reactors were investigated instead. An average substrate-to-methane conversion efficiency of 58,2±18,6% was found for the bench-scale reactors and higher efficiencies (89,2%) were found for the cases which had higher Organic Loading Rates (OLRs) values. The average energy output was 0,013 kWh/Lsewage, value unable to meet the energy needs for the reactor operation, considering equipments normally used such as temperature controller. This balance can become positive if few hypotheses are made, for example (i) to eliminate the use of temperature controller (ii) to alter the operation pattern from continuous to intermittent. Based on energy balance assessment of eight bench-scale reactors, it was observed that the implementation of a system for biogas utilization is not energetically feasible. However, interesting results were found for a full-scale sewage treatment plant, ETE Ouro Verde – Foz do Iguaçu, PR, Brazil. Even though its substrate-tomethane conversion efficiency was about 10% only, the energy balance was quite positive, with energy consumption of 68 kWh/month and energy production of 660 kWh/month. This analysis leads us to conclude that energy recovery from full-scale sewage treatment plants should be practiced by other plants
Resumo:
The objective of this study is to examine the pharmaceutical industry and changes that the fall of patents and entry of generics may cause in the price and consumption of drugs. Thus, there is a brief discussion about the global pharmaceutical industry, from its origins to the present day, showing in particular the case of the United States, today considered the largest industry in this sector. From this, the work seeks to address specifically the Brazilian industry and its regulation. Since the generic law implementation, the participation of this type of medicine has grown significantly in the country. Because they have always been lower than prices of their brand, the cost of treating disease is reduced, which makes generic drugs represent an improvement for consumers in terms of welfare of society
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
The use of electricity for obtaining light has been quite an issue currently discussed, either through new technologies that are emerging, the quest for greater efficiency, reduced waste and rational use. This work comprises a lighting design applied to a metallurgical based Brazilian Standard 5413 which mentions levels of luminance for interior and, in the case of this work, for a sandblasting booth. Ways to improve the workplace and luminosity presented before the project and also after its implementation are discussed. Technologies are chosen guided by technical calculations according to the illuminance values they want to reach for the environment studied. All pertinent design features are critically analyzed and discussed, and at the end proposals are presented, relating to each other in a comparative framework, so the best solution is applied in a practical way in the enclosure. Results are also presented concerning the maintenance of a bank of capacitors to correct the power factor for the metals studied company
Resumo:
água que abastece uma cidade se não for tratada pode tornar-se importante veículo de transmissores de doenças. O controle da qualidade é uma medida que visa, principalmente, garantir a saúde da população. O objetivo desta pesquisa foi avaliar a qualidade da água distribuída pelo sistema de abastecimento da cidade de Santa Lúcia – SP. A água proveniente desse sistema chega até as residências e, muitas vezes, é consumida sem nenhum tratamento doméstico complementar. A cidade de Santa Lúcia é abastecida por três poços profundos (P2, P3, e P4). Com o intuito de avaliar a qualidade da água captada desses poços e distribuídas para consumo humano foram coletadas amostras diretamente dos poços e de um ponto de consumo nas áreas abastecidas por cada poço. Foram feitas três coletas em cada ponto, em três diferentes épocas do ano. Realizaram-se análises físico-químicas e bacteriológicas em todas as amostras. As análises bacteriológicas foram feitas para determinação da presença de coliformes totais, E. coli e contagem padrão de bactérias heterotróficas em placa. As análises físico-químicas avaliaram cloro residual livre, fluoreto, turbidez, pH, cor aparente e sólidos totais dissolvidos. Duas amostras foram positivas para coliformes totais, apenas uma amostra coletada no poço 2 foi positiva para E. coli. Para bactérias heterotróficas todas a amostras apresentaram contagem em placa inferior a 500 UFC/mL. Todas as amostras estavam dentro do padrão determinado pela legislação para pH, turbidez e sólidos totais dissolvidos. Todas as amostras coletadas no poço 2 tiveram como resultado ausência de cloro residual livre, o mesmo resultado para os demais pontos na segunda coleta de amostras. Todas as amostras apresentaram fluoreto com valores abaixo do VMP estabelecido pela legislação brasileira porém apenas cinco com concentrações dentro da faixa estabelecida pela legislação do Estado de São Paulo ...
Resumo:
A contaminação do solo por metais potencialmente tóxicos constitui um dos principais problemas ambientais. Por meio da lixiviação e percolação das águas, esses metais podem ser mobilizados e vir a contaminar mananciais superficiais e subterrâneos, comprometendo sua qualidade. A biodisponibilização desses metais para as plantas e, a partir dessas, para o homem é outro desfecho negativo dessa situação. O cádmio é um elemento tóxico. Os teores encontrados nos solos costumam não oferecer riscos. Porém, esses teores são potencializados pela utilização de fertilizantes. O níquel pode ser carcinogênico em doses elevadas. Sua presença em fertilizantes fosfatados proporciona maiores concentrações do metal no solo. É amplo o registro sobre efeitos do excesso desses metais, tanto em plantas, quanto em animais e no ser humano. O manganês é um dos elementos mais abundantes na crosta terrestre e se encontra largamente distribuído em solos, sedimentos, rochas, água e materiais biológicos. Contrariamente aos dois metais anteriores, esse micronutriente é um elemento essencial ao ser humano. Sua carência causa inúmeras enfermidades, por outro lado, seu excesso também. Nesse caso, poucos são os relatos sobre o assunto. Nesse estudo foram utilizados métodos de extração de metais de fertilizantes e se constatou que, quando presentes, os metais cádmio e níquel apresentaram concentrações proibitivas o que é motivo de preocupação e demonstra a falta de controle sobre a indústria de insumos agrícolas. Para o manganês não há parâmetros orientadores com limites de teores, mas com certeza, são necessários trabalhos nesse sentido para se evitar seu consumo indiscriminado.
Resumo:
The reason of this work is perform a study about using of electrical energy to identify the opportunities through rational use of electrical energy. For that it was necessary perform an analysis of hired energy against consumption. Based in a guide of energy analysis were found the main consumers and verified the main problems, which generate excessive use of electrical energy in a plastic injection factory. It was also analyzed the painting line because there are some thermal equipment that use electrical energy. Based on the data obtained will be proposed ways to reduce the needless consumption and energy use of rationally and efficiently, in addition to re-evaluate the contracted demand based on the new policy of supplying and charging.It were also proposed thermodynamics solutions to reduce the energy consumed in thermal process
Resumo:
Pós-graduação em Engenharia Mecânica - FEG
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Over the years, water has become an increasingly valuable resource and scarce, this situation is attributed to factors such as population growth, poor distribution and increasing degradation of water resources as a result of indiscriminate human activities in the middle environment, making their dwindling availability and increasing its cost. I n this context , the use of rainwater for non-potable purposes begins to be stimulated in Brazil , as a measure to preserve this resource , while in countries such as Japan and Germany , this technique has already been used for a long time. The ability to capture rainwater reduces the demand for sanitation companies, also resulting in cost reduction with the water bill and the risk of flooding in the event of heavy rains. The stored water is used only for non-potable purposes, such as toilets, taps into the garden, for washing vehicles and clothing. This work was developed with the aim of presenting the importance of rational use of water, associated with viability constructive economic and consumption of the installation of rain water harvesting, and for that, considered four case studies. From this study, it was found that the implementation of this system has led to a reduction in costs of water and sewer consumption poses no hazard to the user and its installation does not require significant changes in building construction, however, in relation to the economy, should be made a detailed analysis in each case for investment to bring a suitable financial return within the lifetime of the system
Resumo:
The substitution of diesel by biodiesel meets the current scenario to increase the consumption of alternative energy sources promoting sustainable development of a country. However, the production of biodiesel concurrently generates the formation of glycerine in the process is a by-product. The main application of glycerine is in the food industry, cosmetics, soaps, pharmaceuticals, among others, but these segments are not capable of absorbing the generated volume of glycerine, whereas the total volume of the biodiesel produced about 10% correspond to glycerine. Glycerine obtained from the transesterification reaction (necessary for production of biodiesel) triglycerides and alcohol contains certain impurities such as water, salts, esters, alcohol, and residual oil, which decrease the value. Thus, the purification process or the direct use of glycerine become essential to make it competitive biodiesel production process. This work aims to evaluate the different processes of purification and the use of glycerine obtained as by-product in the production of biodiesel. The research was theoretical, based on technical articles and theses published on this subject, and from these databases was established a summary of the most important processes
Resumo:
This work deals with the creation of an inventory policy, with the main objective of increasing the company's level of service offered to its customers, avoiding plant stops by the lack of raw materials and / or bad inventory management. Calculating safety stock and reorder point of the main raw materials of chemical industry by collecting historical data, statistical analysis and future projections of the company's consumption, and a proposed solution. At the end of the work, have a review of the results