Carta geológico-geotécnica aplicada ao planejamento urbano da região do Córrego Bertini, município de Americana - SP

This paper focuses on the implementation of a geological and geotechnical mapping to the planning of the region stream Bertini, territorial expansion area of the municipality of Americana (SP), a medium-sized city in the countryside of Sao Paulo state, with great potential for growth industrial and residential. To this end, based on the methodology established by the Institute for Technological Research, the charters geological and geotechnical aimed at exposing the capabilities and limitations of the soil. The analysis of similar soil characteristics such as geology, geomorphology, slope, geotechnical testing and the current use and land cover was possible to recognize four geotechinical units. The units I and III are related to areas of top and concave and convex parts of the study area, shown to be sites of low occupancy restriction. However the units II and IV, respectively allocated in the floodplain of the Piracicaba River and the banks of the stream Bertini and some of its drainage, showed a more restricted area due to proximity to water bodies and drainages that offer higher slopes.

Elaboração de mapa de susceptibilidade de corridas de massa/detritos e ondas de cheia, aplicado a empreendimentos dutoviários, na bacia hidrográfica do Ribeirão da Prata (SP)

Given the intense expansion of the industries in Brazil and the discovery of hydrocarbons in the pre-salt layer of the Santos and Campos Basin, there is a need to expand the distribution of oil and gas network in the country. The present work aims to present the development of susceptibility map by two distinct methods of two events (debris flows and full wave), applied to the establishment of pipelines on Ribeirão da Prata Basin. The research area covers two municipalities: São João da Boa Vista and Águas da Prata, in total 145 km2. In the paper was used the methodology proposed by Zaine (2011) for the physiographic subdivision method, which uses geological maps, geomorphological maps, digital terrain models and aerial photographs, used to extract the main elements of the physical environment, as rivers, lines, ridges, tops forms and valley forms and historical processes. Thus, the basin was divided into 11 physiographic zones, considering the following elements: thickness of soil, rock type, geomorphology, amplitude, ridges orientation, erosion occurences and mass movements. Were subsequently performed location maps of dams, that had as main purpose to localize major dams in the study area along with their area and perimeter of the reservoir, and land use map that subdivided the area in woody vegetation, permanent culture, temporary culture and urban area. Along with the preparation of the auxiliar maps was conducted a field campaign with three days and approximately 2 points per km2, which aimed to better understand the physical environment and check the main peculiarities of the study area. Criteria have been established for susceptibility maps physiographic subdivision and land use, and a survey of criteria weights used in each map for both processes under study. For the preparation of susceptibility maps were adopted two different methods, which treat the weighted average and the multiplicand. The weighted average method it is...

A influência das características morfométricas e de uso da terra na morfodinâmica: um estudo da alta bacia do Rio Itanhaém - Baixada Santista/SP

Diante do desenfreado uso da terra, gerando impactos muitas vezes irreversíveis, o planejamento ambiental insere-se como uma ferramenta atualmente necessária. Visto que é sob o relevo que se consolidam as atividades antrópicas, a cartografia do relevo surge como um importante instrumento, indicando setores cujas características naturais impõem limites ao uso da terra. Assim, o objetivo desta pesquisa é analisar as características geomorfológicas da alta bacia do Rio Itanhaém, com ênfase à questão morfográfica e morfométrica do relevo, avaliando também as modificações impostas a este em decorrência do uso da terra, contribuindo, portanto, com a gestão ambiental desta área. Para tanto, foram elaborados documentos cartográficos capazes de evidenciar as características do relevo que impõem limites ao uso antrópico, a saber: as cartas morfométricas (carta de declividade, carta de dissecação vertical, carta de dissecação horizontal e carta de energia do relevo), que são documentos que evidenciam a suscetibilidade potencial do relevo sob a influência da ação das águas e gravitacional; a carta geomorfológica (cenário de 1962), que possibilita a espacialização das formas do relevo, contribuindo para a análise da morfodinâmica; e as cartas de uso da terra (cenário de 1962 e 2000), que, em conjunto com os documentos já especificados, possibilitam a análise da influência da atuação antrópica sob o sistema relevo. De maneira geral, pôde-se detectar problemas na morfodinâmica da área de estudo, evidenciados pela presença de feições denudacionais localizadas, tais como sulcos erosivos, voçorocas, ravina e cicatrizes de escorregamentos, os quais vinculam-se ao potencial natural que o relevo da área de estudo possui ao desencadeamento de processos morfogenéticos; à dinamização de processos naturais pela atuação antrópica... (Resumo completo, clicar acesso eletrônico abaixo)

Geotecnologias na avaliação da suscetibilidade a movimentos de massa no município de Várzea Paulista (SP)

The disordered occupation in several cities in Brazil, is very common, especially during the rainy season, there are numerous cases of gravitational mass movements, with deads of human and builds destruction. The main objective of this work was to identify and map areas to mass movements, through the geo, the municipality of Várzea Paulista, the state of Sao Paulo. For the purpose, were prepared thematic maps of slope, geology, pedology, geomorphology and land use and occupation, which were overlaid using ArcGIS GIS Multicriteria Analysis. Each subject received a weight of influence to the outbreak of such processes and the final result was obtained map of susceptibility to mass movements of the city of Várzea Paulista. This survey found that there are many occupied areas within the city that require monitoring of the Government, especially in the rainy months, because they are in very fragile in terms of geological and geomorphological features. Considering that the data on the physical and natural aspects are scarce in the literature for this region, the results obtained in this study as well as the gathering of information of the physical and cartographic products developed, will greatly contribute to the administration of the municipality, subsidies they provide for the proper use planning and land tenure, pointing out the weak areas of the city geotechnical point of view

Tomografia por Biosusceptometria de Corrente Alternada (tBAC): desenvolvimento, caracterização, implementação

The Biosusceptometry AC (BAC) is a research tool that has been extensively explored by the group Biomagnetism IBB-UNESP for monitoring of the gastrointestinal tract, its response to a known drug or in vivo performance of solid dosage forms. During this period the BAC, which has the characteristics of high sensitivity and low cost, has been developed primarily for recording signals contraction of activity and traffic human gastrointestinal tract. With the possibility of producing images with this instrumentation, it was possible to evaluate different situations in vitro and in vivo for physiological studies and pharmaceuticals. Considering the good performance of this system to produce planar images, the first aim of the BAC system tomography (TBAC) was to evaluate the system performance of BAC to produce tomographic images of phantoms ferromagnetic for a single channel system. All these applications were only possible because of their sensitivity to materials of high magnetic suscepitibility as ferrite, which allow to produce an electrical signal proportional to the variation of the magnetic flux generated by the presence of magnetic marker next to a first-order gradiometer. Measuring this variation at various points was possible to generate planar images that recently came to be produced in systems with multiple detectors, said multi-channels. From planar images, also producing tomographic images of simulators BAC bars in a system of 13 channels using only the center channel, with good results when applied to simple objects as one and two bars. When testing the resolution of the system with more elaborate forms the quality and resolution of images reconstructed is not satisfactory, which would be solved by increasing the spatial sampling rate and hence the acquisition time. The present system works with an acquisition time of about five hours. Whereas this system will be applied for in vivo experiments, the acquisition time became a ...

Diagnóstico ambiental das áreas de expansão urbana do município de Jaguariúna - SP

The spatial chaotic urban growth is an increasing and common problem in Brazilian cities, especially in the State of São Paulo. In order to assist the territorial expansion planning, the present study aimed to conduct the environmental diagnosis of urban expansion areas in the City of Jaguariúna – SP, bounded by the Municipal Plan. From the preparation and analysis of thematic maps, literature review and field analysis, data were collected for use and occupation, geology, geomorphology, pedology, vegetation, water resources and features surrounding the five urban sprawl existing areas. It was noted, in general, that these areas are suitable for urban occupation, since they show flat geomorphology characteristics, with flattened, medium to large hills, slightly undulated, with low slope, and soils that do not present risks to the deployment of buildings, once properly managed. It was also observed a few water bodies crossing these areas and a few areas with native vegetation beyond permanent protection areas along the rivers. By the analysis of these areas and their surroundings, it was possible to determine on which area the urbanization process can occur more quickly. Thus, the study allows the City of Jaguariúna to perform a more effective occupation planning in these areas, always aiming the sustainable development and, consequently, the improvement in population’s quality of life, as well as the maintenance of environmental quality.

Análise geomorfológica e de impactos ambientais da microbacia do Córrego Wenzel - Rio Claro/SP

This study aimed to survey and analyze the geomorphological aspects of watershed stream Wenzel in Rio Claro, as well as anthropogenic incidents about which he eventually causing serious environmental impacts. All these changes in the natural environment are generated from the constant development of the urban environment, which ends up leaving aside factors relevant to the natural order and that over time they become problems to humans. As various forms of environmental degradation occurring on some form of relief, geomorphology can make a major contribution in this field, since the analysis of the hydrographic network can lead to understanding and explanation of numerous geomorphological issues because the waterways are process morphogenetic the most active in the terrestrial landscape sculpture. The research with a systems approach and vision interrelated aspects in question may even serve as a basis for practical planning and urban management, in addition to detailed study of the area, which is of paramount importance to the local society

Proposta de recuperação e manejo de nascente em área rural do município de Álvares Machado – SP

The lack of proper planning in intervention works of runoff water on rural properties and rural public roads leads to economic damage and loss of environmental quality. The impact of the action without technical base is soil erosion, siltation of water sources, loss of the quality and availability of water, invalidating areas for cultivation and livestock. The conservation of headwaters requires beyond regeneration of the environmental characteristics the repair and management of the degraded watercourse in order to control erosion. This graduate work in Environmental Engineering from Universidade Estadual Paulista Julio de Mesquita Filho - UNESP Presidente Prudente proposes a headwater recuperation and management in rural area of Álvares Machado municipality, São Paulo State, through the method of deep drainage applied to the case of a rural road near the outcrop of water. This technique consists in the installation of draining structures in sub-areas of the road surface, or sub-gutter and/or in the platform border in order to conduct the underground flow of water and reduce the loss of sediment in water flow. Therefore, was performed a historic study of use and occupation of land in the municipality of Álvares Machado, portraying transformations of the landscape caused by human action. Geology, geomorphology, pedology and hydrogeology data were collected from the study area in order to establish the conditions that led into the current situation of degradation and formulate an effective intervention strategy for civil works

Pesquisa-ação sobre o uso de indicadores de desempenho do equipamento em uma fábrica de geradores

In the industrial environment the challenge is use better the productive resources: people and machine. The following work has the main goal improve the efficient losses analysis in the stator bar’s production bottleneck equipment situated in the Electric generator’s factory. The action research involved Theory of Constraints on the restriction system identification and developed the data collection framework by losses typology for indicator measurement. The research showed the data collection standardization importance to obtain reliable data and strategic efficiency indicator to optimize equipments. Besides of this, OEE and TEEP indicator demonstrated efficiency results to analyze the actual efficiency when the machine works and the increase capacity opportunity to treat the hide costs in the organization following the continuous improvement

Desempenho estrutural de vigas em madeira laminada colada armada

The objective of the present work was to evaluate Pinus’ glued laminated timber (glulam) beams and steel reinforced glulam beams, using PU mono-component adhesive in lamination step and epoxy adhesive to bond steel bars. The mechanical performance was verified through bending test, and the adopted method based on homogenized section, to considerate the differences between wood and steel mechanical properties. The homogenization section method proved itself effective in obtaining the stiffness of the parts in MLCA. The stiffness of reinforced beams increased 91% in comparison with glulam beams, differing only 5.5 % from value of stiffness calculated

A antropogeomorfologia na bacia do Córrego do Cavalheiro - Analândia/SP: uma avaliação da dinâmica do uso da terra e sua adequabilidade a legislação ambiental e a capacidade de uso

The assessment of land use dynamic can be an instrument for analysis in anthropogeomorphology, which would allow one to verify the human geomorphological actions and its various implications in changing the original morphology for the creation of a human morphology. This study aimed to consider the land use dynamics and its interference in the morphology of Cavalheiro Stream Basin. From this assessment, to understand the implications of land use in the creation of a human morphology, as well as to analyze if the current use is in accordance with the legal restrictions placed by ongoing environmental legislation and with the ability to land use. The chosen of this studied area was due to assumptions raised by Pinton (2007) for changes in the dynamic of rainwater erosion of this area caused by human actions, specially the cultivation of sugar cane in morphologies that are unfit for it. The search took as methodological support the principles that concern the General Systems Theory, trying to see the watershed as an open system. The geomorphological data, of land use and of legal restrictions to the use and occupation of land, were collected from different cartographic techniques. Besides, it was developed a sketch map of land use capacity by adapting the technique proposed by Lepsch (1983). This way, the data obtained in this survey are considered capable to provide subsidies for the identification of changes in original morphology of the Cavalheiro Stream Basin and the genesis of a human morphology, as well as conflicts and adjustments of current land use in environmental system and on the legal restrictions outlined in the ongoing environmental legislation, contributing to a proper environmental planning with the characteristics of the physical environmental system of this basin

Fractografia quantitativa e o conceito de tenacidade à fratura para a análise do efeitodo choque térmicos em TiO2

The present study evaluated the use of semicircular bending test (SCB) as an alternative to conventional bending test to examine the effect of thermal shock. Still, studies the behavior of fracture surfaces generated by monofractal behavior analysis, which allows us to evaluate the contributions of the microstructure and the mechanical context in forming reliefs during the crack propagation. The fractal analysis is made from elevation maps obtained by reconstruction method by extension of the focus stacks of digital images acquired in microscope. The specimens used were samples semicircular pressed TiO2 (rutile) with and without heat shock, prepared for testing mode I loading. Were also produced, specimens in the form of bars for Weibull statistical analysis. From the three-point bending test, we found the variation of fracture toughness between the samples after the heat shock and natural condition. The SCB test was feasible for the analysis of thermal shock resistance. The results showed that the value of the fracture toughness decreases as the heat shock treatment

Caracterização do defeito tipo trinca de laminação, ocorrido no processo de laminação de barras de aço

The mechanical forming processes are the main means of transformation. Among all processes, the most used is rolling and broken down into flat and non-flat products. In the flat products are classified plates, and products no plans bars and profiles. Thus laminating products, mostly, are the raw materials for other processes of transformation, as stamping, forging, machining, bending and more. This work has focused on non-flat products, classified as bars and rods, watching a key point in the proceedings that is the product quality. Here is demonstrated through metallographic analysis of steel bars, hot-rolled, the characteristics of surface cracks in these bars

Análise do desempenho físico-mecânico de painéis compensados de Pinus sp. produzidos com adesivos aquosos a base de poliacetato de vinila e de homopolímero vinílico

This study aimed to evaluate the physico-mechanical performance of three PVA adhesive formulations according to the Brazilian standards for plywood testing and to evaluate the results with those presented in the technical literature and specified in normative documents. The study presents the production process of the panels, the obtaining of samples and, finally, the implementation of physico-mechanical characterization tests based on plywood Brazilian standards. For the panels production it was used a gramature of 120 g / m² and applied a pressure of 15 bars and two temperature combinations and pressing time for each adhesive. The commercial adhesives used were PVA 1810, PVA 1060 and Vinyltec 239. The physical tests conducted were thickness swelling, density, moisture content and water absorption. The mechanical tests were static flexion, for the determination of elasticity modulus (MOE) and rupture modulus (MOR), and shear in the glue line. Among the three formulations studied none showed good performance in the presence of water. However, other trials in the adhesive showed better results and closer to the commercially equivalent used, in the case the urea-formaldehyde, was the PVA 1810, that can be applied in non-structural uses and in environments without the presence of moisture

Tomografia por biosusceptometria de corrente alternada

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)