Avaliação do comportamento mecânico sob deformação da liga Ti- 30Ta visando aplicações biomédicas

Titanium and its alloys have been used for biomedical applications due their excellent properties such as high corrosion resistance, biocompatibility and mechanical properites. In this study, microstructural and mechanical properties of Ti-30Ta alloy was evaluated during its processing. Ti-30Ta alloy ingots were produced from sheets of commercially pure titanium (99.9%) and tantalum (99.9%). Its melting was realized in arc melting furnace in an argon atmosphere. After homogenizing at 1200ºC, ingots were cold worked by swaging. Samples with 13 mm in diameter were obtained. They were forging at the reduction ratios of 15%. After deformation, microstructure was evaluated by optical microscopy in each condition. Also, Vickers microhardness of samples was measured and phase constitution was evaluated using XRD analysis

Caracterização dos rastros branquiais de Astyanax altiparanae (Characidae) por técnicas histoquímicas e ultramorfológicas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência do Luar nas Atividades de Emergência e Retorno ao Abrigo do Morcego Hematófago Desmodus rotundus (Chiroptera, Phyllostomidae) no Sudeste do Brasil: subtitulo

The common vampire bat Desmodus rotundus has as main food source blood of medium and large sizes mammals, but sporadically is observed feeding on birds, causing occasionally excessive bleeding and economic losses. Due to this D. rotundus is one of the most studied species of bats in the Americas. Once known that the lunar clarity might influence the nocturnal activities of the common vampire bats, the present study was carried out to know the behavior and schedules of emergencies and returns of bats to the shelter, its social behavior at the shelter´s entrance, especially of the dominant male, and the size and composition of the colony in different moon phases. The colony was composed by 105 individuals (65 females and 40 males) harboring in a hollow-tree of Farm Edgardia in Botucatu Municipality, State of São Paulo. Through the eight filming sessions, two for each moon phase, it was possible to observe that the distribution of emergences and returns to the shelter thought the night followed a specific pattern for each moon phase. The greatest number of emerging bats occurred in periods in which the moon was not born yet and the largest number of returns just before moon has been reached its maximum level in the sky. Therefore, the time period that bats are staying outside the shelter seems to be directly influenced by lunar light. This factor can influence the social activity of the colony and, in particular, the dominant male, who remains still on tree’s trunk, near the entrance of the shelter with greater frequency during periods of low moon light

Investigação sobre deformação neotectônica no lineamento Guapiara, região de Ourinhos, Fartura-SP e Santo Antonio da Platina - PR

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Geologia do depósito de ouro do alvo guarda-mor, na sequência Jaupaci (Israelândia - GO)

The study area of the Guarda-Mor target (Israelândia-GO) contextualizes the terrains of the estaern portion of the Arenópolis Magmatic Arc, more accurately, the Neoproterozoic associations inserted in the field of the Jaupaci volcano-sedimentary sequence. The mapped area is located in the central-western of Goiás state. The presente paper has as main objective to characterize the structural, petrographic and litogeochemistry of the target rocks beyond to compare these factors with the Mina Bacilândia rocks (Fazenda Nova-GO) in order to assess the genetic similarity of volcano-sedimentary units and deposits associated. The Guarda-Mor target is represented by the Jaupaci metavolcanic rocks sequence presenting bimodal volcanism. This sequence consists in metafelsic rocks like sericite/muscovite quartz schist, phyllite and metarriolites and/or metariodacites with calc-alkaline geochemical signature and metamafic rocks with tholeiitic character formed by actinolite - chlorite schist and chlorite - quartz schist. Besides the package of supracrustal rocks also can be observed the occurrence of a local intrusion syn- to late - tectonic named Granito Subvulcânico. In the study area beyond the marked volcanism also seen an event of crustal melting granitogênese evidenced by the presence of 2 granites at the east and the west of the map, Granito Israelândia and Granito Iporá respectively. Structural analysis both at the macro and micro have identified 3 deformation phases. The types of rock on the region record features in the metamorphic facies top and down. These features were subdivided into 3 metamorphic areas: the east and West areas show thermal metamorphism due to intrusion of adjacente granites while the central domain displays features of regional metamorphism. Gold mineralization of the Guarda –Mor deposit target suggests a possible structural control beyond pronounced the hydrothermal alteration. The mineralization may also be...

Desenvolvimento de um código computacional para simulação e análise de espectros atômicos

The aim of this work was the development a computer code for simulation and analysis of atomic spectra from databases constructed from the literature. There were created four routines that can be useful for spectroscopic studies in the atomic processes of laser isotope separation. In the first routine, Possible Transitions, the program checks the possible electron transitions from an energy level of the atom present in the database considering the selection rules for an electric dipole transition. The second routine, Locator Transitions, checks the possible electronic transitions within a user-specified spectral region. The routine Spectra Simulator creates simulated spectra using the graphical application gnuplot through lorentzian curve and finally, the routine Electronic Temperature determines the temperature of electronic excitation of the atom, thought the Boltzmann Plot Method. To test the reliability of the program there were obtained experimental emission spectra of a hollow cathode discharge of dysprosium and argon as a buffer gas. The hollow cathode discharge has been subjected to different values of operating currents and pressure of inert gas. The spectra obtained were treated with the assistance of program routines developed (Transition Locator and Spectra Simulator) and temperatures electronic excitation of the atoms of dysprosium in the different discharge conditions were calculated (routine Electronic Temperature). The results showed that the electronic excitation temperature of the neutral dysprosium atoms in the hollow cathode discharge increases with increasing current applied to the cathode and also by increasing the gas pressure buffer. The determination coefficients, R2, obtained by the Electronic Temperature routine using the linear adjust of the Boltzmann Plot Method were greater... (Complete abstract click electronic access below)

O ensino do desenho para crianças e jovens

Through my experiences as a teacher assistant in a free course design, I seek to understand the intentions and needs of children and youth with the design, so as to work it in a more consistent as the season and wishes of each student. For this I seek aid in studies on children's drawing of Derdyk Edith and also in observing the relationships that children and young people have with the drawing held in my practice as a teacher. Still reflect on the design in some of its particulars, especially concerning the optics of some artists and scholars of the practice of drawing. At the end of the study, propose suggestions for practices to be developed with children and young people who would be various forms of working drawing with experimental forms of building graphics, aiming so that students can add these unique experiences to broaden their understanding of design as well as its arch graphic possibilities. Thus inspired, especially in Derdyk considerations about the experimental design, I can conclude that through experimentation, we can offer young people a diverse thinking design and the possibilities of conceiving it.

Mapeamento geológico e petrologia dos complexos máfico-ultramáficos de Mangabal Sul e Mangabal Norte, região de Sanclerlândia, Goiás

The Mangabal Sul and Mangabal Norte mafic-ultramafic complexes are interpreted as intrusive stratiform bodies in the Goiás Magmatic Arc during the Brazilian cycle, being economically important for harboring significant amounts of nickel and copper sulfides. The main lithotypes of the complexes are gabbronorites, olivine gabbronorites, pyroxenites and peridotites, with variated degrees of deformation, recrystallization and metamorphism superimposed, with metamorphic peak of amphibolite to granulite facies evidenced mainly by the occurrence of coronitic olivine in metamafic rocks and the occurrence of syn-kinematic retrometamorphism associated with the development of the main foliation Sn. The Sn foliation planes show NE-SW preferential direction, consistent with the foliation direction of VIII the enclosing gneisses and schists, also concordant with the general elongation of mafic and ultramafic bodies displayed on map. The sulfide phase presents textures that indicate remobilization, associated with the occurrence of significant amounts of rutile within the ore which reinforces this idea. Along with the sulfides, the occurrence of expressive quantities of titanium oxides such as ilmenite and rutile, make the area more economically attractive. It can be suggested that the Mangabal Norte and Mangabal Sul complexes are contemporary, have the same genetic affinity and suffered the same deformational and metamorphic processes, evidenced by their structural and petrological similarities

Caracterização estrutural da mineralização da mina de Fazenda Nova - GO

The study area is includes in the geological context of Arenópolis Magmatic Arc, a region where there are neoproterozoic associations of granodioritic and tonalitic composiotion. (Ortogneisses of the western Goiás) and sequences metavolcanic-sedimentary (Jaupaci Metavolcanic-sedimentary Sequence ). In the mapped area, both units are covered by a cover-laterite. The Ortogneisses from Goiás West consist of a source granodioritic gneisses, corresponding to the Biotite granodiorite gneisse, and also by tonalitic gneiss composition corresponding to Metatonalit. The Jaupaci Metavolcanic-sedimentary Sequence is formed by Chlorite Schist (Metabasalt), Biotite Schist (Metadacite) and Sericite Schist (Metarhyolite), and even intrusions Sin/Tardi e Post Tectonic, granite to diorite composition (Diorites), and alson tonalitic (Bacilandia Tonalite). Post tectonic intrusions are observed, wich were Hornblend Diorite Porphyry and Lamprophyres, Structural analysis allowed the identification of three deformational events, Dn-1, Dn and Post-Dn. The first event is associated with a bygone foliation, lineation which generates an intersectional event, generating the foliation Sn, this being the most important structure in the study area, generating even the type mineral lineation and stretch. The last deformational event is characterized by folds on different scales, affecting the Sn foliation. The rocks of the region have features s active hydrothermal and regional metamorphism, and are composed os assembly indicative of mineralogical facies metamorphism Green Schist, in chlotite zone, with evidence of retro metamorphism. Locally there are sulfides as pyrite, arsenopyrit and pyrhotite, and te mineralization is associated with the arsenopyrite

Crescimeno de apatita na superfície da liga Ti-7, 5Mo empregando tratamento higrotérmico

The objective of the present work was to evaluate surface of experimental alloy Ti-7.5Mo after hydrothermal treatment. Ingots were obtained in arc melting furnace under an argon atmosphere and then homogenized under vacuum at 1100ºC for 86.4 ks to eliminate chemical segregation and after cold worked discs were cutting and grinding. For surface treatment, samples were immersed in a container with NaOH aqueous solution 5M, autoclaved, washed with distilled water. Followed, samples were heat treated and they were soaking in 5xSBF to form an apatite layer on the surface. Surfaces were investigated by, scanning electron microscopy, X-Rays powder diffraction, atomic force microscopy and contact angle, in order to evaluate the wettability of the alloy surface. The results were compared with our previous studies using the group of chemical surface treatments and results shows better condition is 120 minutes in the autoclave

Caracterização da liga do sistema binário Ti-15Mo para aplicações biomedicas

As they have excellent mechanical properties, corrosion resistance and biocompatibility, much research has been conducted with respect to biomedical applications of titanium alloys. This work aims to study the experimental system binary alloy Ti-15Mo, in the raw state of fusion and heat treatment after homogenization, solubilization and calcination (simulating conditions employed for nanotube growth) targeting biomedical applications. Samples were obtained by casting the components in an electric arc furnace with inert atmosphere of argon. After obtaining the alloy, it was heat treated at three different heat treatments, namely homogenizing, calcining and simulation solubilization. The phases present were analyzed by X-ray diffraction, optical microscopy and microhardness testing

Investigação sobre deformação neotectônica no lineamento Guapiara, região de Guapiara e Jacupiranga

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Aspectos históricos sobre a cicloide: a curva que desafia a intuição

O objetivo deste trabalho é resgatar um pouco da rica história do estudo da cicloide. Para isso, ser˜ao mostrados inicialmente os passos da sua construção, as deduç˜oes de suas equaç˜oes polares e cartesianas que, a seguir, ser˜ao utilizadas nos cálculos da área sob um arco dessa curva, da reta tangente, bem como, do comprimento desse arco. Ser˜ao reconstituídas etapas das aplicações da cicloide nos casos do pêndulo de Huygens, em que ela se comporta como isócrona (mesmo tempo) e do problema da braquistócrona (tempo mínimo) que desafiaram os grandes matemáticos dos séculos XVII e XVIII, com destaque para Huygens e os irm˜aos Jakob e Johann Bernoulli.

Crescimento de apatita na superfície da liga Ti-25Ta empregando dois tipos de tratamento de superfície: biomimético e deposição de polímero por eletrofiação

Titanium and its alloys has been widely used as materials for metallic biomaterials implants are usually employed to restore the hard tissue function, being used for artificial joints and bones, synthetic plates, crowns, dental implants and screws . Objective of this work was the surface modification of Ti-alloy 25Ta from biomimetic surface treatment of employment and deposition of polymer by electrospinning. The league was obtained from the fusion of the pure elements in the arc furnace with controlled atmosphere. The ingots were subjected to heat treatment, cold forged and sectioned discs with 13 mm diameter and 3 mm thick. Two surface treatments was evaluated, biomimetic and electrospinning with PCL fiber. The biomimetic treatment was performed involving alkaline treatment for three molarities 1.5M, 3M and 5M with immersion in SBF. The electrospinning was performed using PCL polymer alloy surface after the alkali treatment Ti25Ta 1M. For this group the polymer coated surfaces were immersed in calcium phosphate containing solution for immobilization of apatite. The results were compared with previous studies using surface treatment group to verify hydroxyapatite formation on the sample surface and it is concluded that the best condition is biomimetic treatment with 5M alkali treatment and heat treatment at 80 ° C for 72 hours

Modelagem do resfriamento para a zona termicamente afetada pela soldagem de tubos de aço carbono

Because the high consumption of welded pipe for exploration and conduction oil and gas, optimization of manufacturing processes is necessary to obtain better productivity, efficiency and cost reduction. The objective of this study is to analyze the forms of heat transfer during the welding of pipes using longitudinal submerged arc process them to propose a model for the temperature distribution in the welded region. For this analysis are addressed as the heat transfer modes operate in the specified welding process and the necessary considerations for the mathematical model were obtained. The calculations were performed and the simulations needed to obtain the temperature distribution in the tube were carried out. Therefore, the practice was satisfactory and the results showed a range of temperatures along the pipe for a particular model and the future suggestions for improvement of this work